Wood Conditioner

Article#1449088 Model#200034444 Format946ML
Wood Conditioner
 

Description

For even stain penetration on soft woods such as pine, fir and spruce.

Technical specifications

Component :Oil based VOC :350 g/L Size :946 mL Area :125 sq. ft./946 mL Opacity :n/a Interior/Exterior :Indoor

You may also like

VARATHANE
Ultimate Wood Stain - 236 mL - Golden Pecan
Format 236ML
Article #03306159
Model #302971
★★★★★ ★★★★★
0
(0)
SAMAN
Water-Based Stain - Black
Format 236ML
Article #7264010
Model #TEW-108-8
★★★★★ ★★★★★
0
(0)
SAMAN
Water-Based Stain - White
Format 236ML
Article #7264017
Model #TEW-116-8
★★★★★ ★★★★★
0
(0)
VARATHANE
Ultimate Wood Stain - 236 mL - Old Grey
Format 236ML
Article #03306157
Model #302969
★★★★★ ★★★★★
0
(0)
SAMAN
Water-Based Stain - White
Format 946ML
Article #72645113
Model #TEW-116-1L
★★★★★ ★★★★★
1
(1)
SAMAN
Hybrid Stain - Walnut
Format 1L
Article #72645081
Model #SAM-309-1L
★★★★★ ★★★★★
0
(0)
MINWAX
Interior Wood Stain - Dark Walnut
Format 236ML
Article #1449021
Model #27161
★★★★★ ★★★★★
0
(0)
VARATHANE
Ultimate Wood Stain - 236 mL - American Walnut
Format 236ML
Article #03306164
Model #302976
★★★★★ ★★★★★
0
(0)
MINWAX
Interior Wood Stain - Golden Oak
Format 236ML
Article #1449010
Model #210B1
★★★★★ ★★★★★
5
(4)
SAMAN
Water-Based Stain - Walnut
Format 236ML
Article #7264011
Model #TEW-109-8
★★★★★ ★★★★★
0
(0)
MINWAX
Interior Wood Stain - Early American
Format 946ML
Article #1449046
Model #230034444
★★★★★ ★★★★★
0
(0)
MINWAX
Interior Wood Stain - Special Walnut
Format 236ML
Article #1449015
Model #22401
★★★★★ ★★★★★
5
(1)
VARATHANE
Ultimate Wood Stain - 236 mL - Ebony
Format 236ML
Article #03306176
Model #316666
★★★★★ ★★★★★
0
(0)
SAMAN
Water-Based Stain - Sesame
Format 236ML
Article #7264042
Model #TEW-203-8
★★★★★ ★★★★★
0
(0)
SAMAN
Hybrid Stain - Prestige Grey
Format 1L
Article #72645133
Model #SAM-319-1L
★★★★★ ★★★★★
4
(1)
VARATHANE
Ultimate Wood Stain - 236 mL - Early American
Format 236ML
Article #03306165
Model #302977
★★★★★ ★★★★★
0
(0)
SAMAN
Water-Based Stain - Harvest Gold
Format 236ML
Article #7264013
Model #TEW-111-8
★★★★★ ★★★★★
0
(0)
MINWAX
Interior Wood Stain - Special Walnut
Format 946ML
Article #1449044
Model #224034444
★★★★★ ★★★★★
4.7
(63)
SAMAN
Water-Based Stain - Black
Format 946ML
Article #72645109
Model #TEW-108-1L
★★★★★ ★★★★★
0
(0)
SAMAN
Hybrid Stain - Cedar
Format 1L
Article #72645075
Model #SAM-303-1L
★★★★★ ★★★★★
0
(0)
SAMAN
Hybrid Stain - Dark Chestnut
Format 1L
Article #72645080
Model #SAM-308-1L
★★★★★ ★★★★★
0
(0)
SAMAN
Hybrid Stain - Antique
Format 946ML
Article #72645073
Model #SAM-301-1L
★★★★★ ★★★★★
0
(0)
VARATHANE
Ultimate Wood Stain - 236 mL - Carbon Grey
Format 236ML
Article #03306172
Model #316662
★★★★★ ★★★★★
0
(0)
VARATHANE
"PREMIUM" GEL STAIN
Format 236ML
Article #03305314
Model #Y60498
★★★★★ ★★★★★
0
(0)
SAMAN
Water-Based Wood Stain - Castle Stone
Format 236ML
Article #72645139
Model #TEW-011-8
★★★★★ ★★★★★
0
(0)

Is this safe to use on wooden food utensils?

Asked by: Jebsw
  • y_2020, m_8, d_10, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_CA, sid_1449088, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Wood Conditioner is rated 4.6 out of 5 by 104.
Rated 4 out of 5 by from Used on soft pine with good results My first experience with this product, which I understand if basically a water thin varnish. Made a coffee table from pine pallet wood with great results. I first tested it on some scrap wood, and, just has the product literature says, found that the pre stain conditioner gave a more even stain effect. The part of the scrap without it had both very dark spots, and other spots that were almost white! Just make sure you give it time to dry before starting to stain your project, also the thickness and/or number of coats will have a big impact on how your project accepts stain. I look forward to playing with this again on a future project!
Date published: 2017-02-21
Rated 5 out of 5 by from Actually does the job I've used a number of methods to reduce uneven stain penetration over the years - sanding sealer, diluted varnish wash, etc. I'd read that the Minwax wood conditioner worked well, so I gave it a shot on some unfinished pine furniture I wanted to stain with a medium gray. Application was simple - just brushed on lightly. (instructions say one can use a rag as well), and there was a two hour (I think) window in which to apply the stain. I was impressed - the stain penetrated almost like bare wood, but it indeed was much less uneven. Most other techniques I've used, the stain barely penetrates and I basically layered the stain on top. So I'm a believer. This stuff actually works. After staining, the finish applied normally.
Date published: 2018-03-24
Rated 3 out of 5 by from Lightens Stain too much Minwax Pre-Stain does what it proclaims. It does provide better definition for softer woods, and it does work well to protect cut ends from being a dark mess. You can see from my picture it does enhance definition and minimize blotches. However, when you put the stain on after the pre-stain (I did after 30 minutes in picture) the stain is so light it's unappealing. I used Minwax stains English Chestnut, and Red Oak (and Cherry and Gun Stock not pictured) trying to find a color I could accept. I never did. I ended up using Varathane Light Walnut Stain without pre-stain. It did have a few blotches, but otherwise, I was very pleased with the results on light pine wood. I did use the pre-stain on the ends of the wood, and that did work well.
Date published: 2014-04-06
Rated 4 out of 5 by from I used an ample amount and let cure 1-2 days Before using, I read a lot of articles about applying it per directions versus letting it sit and cure overnight+. I decided to go the overnight+ route. I was using it on fresh pine. I applied a decent amount and the wood soaked up the conditioner immediately and there was really none to wipe off. After 1 day, the Minwax (oil-based) stain, went on pretty evenly, some areas were still just a little bit blotchy. Some wood I let cure for 2 days, and I noticed that it went on even more evenly with no blotching that I could see. Also, I realized that one piece of wood where I neglected to really get a good amount of the conditioner on, came out very blotchy (after 1 day)! So, with my experience: make sure to use an ample amount whether you need to wipe off or not depends on the type of wood/it's existing age and condition; letting it cure overnight seemed to work well and letting it cure longer seemed to work even better. And please make sure you use in a VERY ventilated area and wear a mask, the smell is so incredibly strong.... to me, like 5x worse that Minwax stain!
Date published: 2016-02-25
Rated 5 out of 5 by from Works as advertised Used to keep stain absorbing evenly. Used on oak bare wood to stain golden oak - had tried stain on a scrap piece of wood showing uneven stain absorption. Worked as advertised to even final look. Oil base so not easy to clean up in cold weather.
Date published: 2016-01-15
Rated 5 out of 5 by from A must have for any woodworker For anyone who has ever done any kind of woodworking to were they had to strip the wood down to bare, this is a must have for you. It keeps you from getting a blotchy finish you sometimes get when bare wood soaks up polyurethane , varnish or shellac differently on one side of a board than another. The pre-stain creates a barrier to allow even coloration of your stain and even penetration of your finish material. [This review was collected as part of a promotion.]
Date published: 2019-04-10
Rated 5 out of 5 by from A Pine Preparation Must We sanded our floors to reveal raw pine. Then we used Minwax Wood Stain Pre-Conditioner. We then did 3 coats of Jacobean to get a dark rich, color which was followed by a coat of Minwax Semi-Gloss Oil-Based polyurethane. It took about 24 hours for each coat to dry. We had never done this before. We watched some YouTube videos for appropriate techniques, and it went really smoothly. I wouldn't trade our floors for any laminate on the market!
Date published: 2017-08-21
Rated 5 out of 5 by from Perfect predating yreatment This product does a wonderful job of preparing the wood to accept a coat of stain. I’ve used it many times and always get a very even coat of Stan after applying this product. This only adds 10 minutes to the staining process. Apply this, wait 10 minutes and wipe off, then apply stain. Be sure to apply stain within 2 hours of applying this per instructions. I’ve never waited that long as I precise and them stain right away instead of working with lots of wood at once. [This review was collected as part of a promotion.]
Date published: 2018-12-17
  • y_2020, m_8, d_10, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_104
  • loc_en_CA, sid_1449088, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store