Wood Finish

Article#87005072 Model#CA19460-4 Format3.78LT
Wood Finish
 

Description

Recommended for use on exterior wood decks, siding, fences, railings, stairs and outdoor wood furniture. Cabot australian timber oil is a unique blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability and pure tung oil for color depth and water repellency, it delivers three-way oil protection. In addition, complex translucent iron-oxide pigments are added to ensure a lasting U.V.- absorbing surface, rich with color and dimension.

Technical specifications

Model :Australian timber oil Color :Jarrah Brown Finish :Matte VOC :275 g/L Size :946 ml. Area :250-350 sq.ft. Opacity :Translucent Ultraviolet Protection (Y/N) :Yes Water-Repellent (Y/N) :Yes Interior/Exterior :Outdoor Component :Oil based

Frequently bought together

PURDY
Purdy(R) - Painting Kit - 5 Pieces
Format 5PC
Article #14495821
Model #13C840000
★★★★★ ★★★★★
0
(0)
PURDY
Purdy - Paint Brush - Polyester/Nylon - 3/Pack
Format 3PK
Article #14495352
Model #140853100
★★★★★ ★★★★★
4.7
(134)
RICHARD
Sander- "Vac-Pole" Sanding Kit
Article #0271488
Model #18374
★★★★★ ★★★★★
5
(1)
SIMMS
Paintbrush - Stain and Paint - Synthetic Bristle - 5"
Format 125MM
Article #01585145
Model #1960-5
★★★★★ ★★★★★
5
(1)
SICO
Stripper for wood 3.78L
Format 3.78L
Article #50316492
Model #802-111-3.78L
★★★★★ ★★★★★
2
(6)
RICHARD
Hand Sander
Format 9X31/4"
Article #0271137
Model #18300
★★★★★ ★★★★★
0
(0)

You may also like

SICO
Sico Semi-Transparent Wood Tinting Base - 3.6 L
Format 3.6L
Article #50316468
Model #234-407-3.6L
★★★★★ ★★★★★
1
(1)
SICO
Sico Solid Wood-Tinting Base - Exterior - 3.5 L
Format 3.5L
Article #50316446
Model #232-503-3.5L
★★★★★ ★★★★★
0
(0)
SICO
Stain - Exterior Wood Stain
Format 875ML
Article #50316445
Model #232-503-875ML
★★★★★ ★★★★★
0
(0)
DENALT
Denalt Exterior Semi-Transparent Stain - Urethane Reinforced - 3.7 L
Format 3.6L
Article #55505260
Model #6407
★★★★★ ★★★★★
0
(0)
DENALT
Denalt Exterior Opaque Stain - Urethane Reinforced - 3.78 L - Neutral Base
Format 3.78L
Article #55505259
Model #6008-3
★★★★★ ★★★★★
0
(0)
OLYMPIC
"Maximum" Stain + Sealant - Neutral Base - 3.78 L
Format 3.78L
Article #63575376
Model #79560C/01
★★★★★ ★★★★★
2.4
(15)
CABOT
Wood Finish
Format 3.78LT
Article #87005066
Model #CA19457-4
★★★★★ ★★★★★
3.8
(180)
SICO
Paint - Exterior Wood Finish
Format 3.78L
Article #50316478
Model #236-580-3.78L
★★★★★ ★★★★★
4.7
(10)
SICO
Stain - Exterior Wood Stain
Format 3.78L
Article #50316474
Model #234-882-3.78L
★★★★★ ★★★★★
0
(0)
SICO
Paint - Exterior Wood Finish
Format 3.78L
Article #50316480
Model #236-780-3.78L
★★★★★ ★★★★★
4.6
(9)
SICO
Stain - Exterior Wood Stain
Format 3.78L
Article #50316472
Model #234-851-3.78L
★★★★★ ★★★★★
0
(0)
OLYMPIC
Maximum Waterproofing Wood Sealant - Clear - 3.78 L
Format 3.78L
Article #63575201
Model #56400C/01
★★★★★ ★★★★★
2.8
(4)
SICO
Exterior Wood Stain - Medium Base - 3.6 L - Solid
Format 3.6L
Article #50316443
Model #232-502-3.6L
★★★★★ ★★★★★
0
(0)
SICO
Sico Exterior Wood Stain - Neutral Base - 3.5 L - Solid
Format 3.5L
Article #50316459
Model #132-503-3.5L
★★★★★ ★★★★★
1
(2)
OLYMPIC
"Maximum" Stain + Sealant - No 2 Base - 3.78 L
Format 3.78L
Article #63575380
Model #79612C/01
★★★★★ ★★★★★
2.7
(3)
DENALT
Denalt Exterior Opaque Stain - Urethane Reinforced - 3.78 L - White Base
Format 3.78L
Article #55505257
Model #6008-1
★★★★★ ★★★★★
0
(0)
SICO
Stain - Exterior Wood Stain
Format 3.78L
Article #50316449
Model #232-757-3.78L
★★★★★ ★★★★★
0
(0)
SICO
Exterior Wood Stain
Format 3.78L
Article #50316439
Model #232-100-3.78L
★★★★★ ★★★★★
0
(0)
SICO
Stain - Exterior Wood Stain
Format 3.78L
Article #50316476
Model #234-954-3.78L
★★★★★ ★★★★★
0
(0)
OLYMPIC
"Maximum" Stain + Sealant - Cedar - 3.78 L
Format 3.78L
Article #63575377
Model #79561C/01
★★★★★ ★★★★★
2.4
(18)
SICO
Stain - Exterior Wood Stain
Format 3.78L
Article #50316470
Model #234-757-3.78L
★★★★★ ★★★★★
0
(0)
CABOT
Exterior Stain for Deck and Siding
Format 3.78L
Article #87005064
Model #CA19400-4
★★★★★ ★★★★★
3.8
(184)
CABOT
Exterior Stain for Deck and Siding
Format 3.78LT
Article #87005061
Model #CA19202-4
★★★★★ ★★★★★
3.8
(21)
OLYMPIC
Maximum Toner Stain and Sealant - Cedar - 3.78 L
Format 3.78L
Article #63575202
Model #56403C/01
★★★★★ ★★★★★
5
(1)
OLYMPIC
Summit Advanced Stain And Sealant - 3.78L - Base 2
Format 3.78L
Article #50317019
Model #80302C/01
★★★★★ ★★★★★
5
(1)

It has a check mark for Exterior use but for Waterproof it has an X ?? So to use this on an outside wood table would you have to use something after to waterproof it ???

Asked by: Huggy
  • y_2020, m_10, d_27, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_CA, sid_87005072, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Wood Finish is rated 3.7 out of 5 by 182.
Rated 5 out of 5 by from Great Product I re-finished a deck that was dark grey and black from mold, dirt and neglect. I scrubbed it clean so it looked like wood again and applied Cabots Australian Timber Oil Jarrah Brown to the floor, seats and top plate on rail, I painted the rail slats to match house color. This was in 2011 yikes today I have started scrubbing the deck and will re- apply the same stain again, it probably should have been done a bit sooner but it has been 7 yrs. and this deck was not in great shape to begin with but I really think ATO saved my deck.. The photo is of it being washed and how it looked after over 7 yrs of Iowa weather. It will look new when I'm done again.
Date published: 2018-06-07
Rated 4 out of 5 by from Stained the deck Did all the required prep and used a non-air commercial sprayer to apply. Went on smoothly and dried completely in 48 hours.Over sprayed many plants. Rinsed off what I could and only had a few leaves, no plants, that died. Sprayed steel anti-slip grid and dried in 12 hours. Sprayed the anodized aluminum rails to preserve the color and after 4 weeks they are still tacky. The wood has a slight orange tint, but the wood grain shows excellently. I asked for clear and was sold the #9400 Australian timber oil (natural). I'd purchase again and recommend to anyone, except for the anodized aluminum.
Date published: 2013-08-08
Rated 2 out of 5 by from Disappointing I've used Cabot Australian Timber Oil #9458 stain on my deck starting in 2008. Super durability and very satisfied. After 8 years it needed staining again. I was forced to use the same product but different chemical make up. (#19548) In 2017 I had it redone again because I had replaced some boards. Enter 2019 and it needs to be stained again! I did the required steps in prepping it every time it has been done. Not very durable! And a very disappointing product. I will offer a word of advice to others, Spraying or rolling may be quick but brushing is the best way to apply it to a deck surface especially if you have gaps between your boards.
Date published: 2019-06-14
Rated 5 out of 5 by from Easy to apply and looks great I used the Honey Teak color of this stain on a pergola I built behind my New Orleans home.  The lumber is simple pressure treated pine which I sanded with 120 grit sandpaper before I applied the stain.  This is the first time I ever used any kind of stain so I used a lambswool applicator for best results.  I was careful to wipe it repeatedly with the applicator to even the application out and take up any excess.  I found it took about three days before the stain was fully cured and no longer tacky.  I couldn't be happier with the results.  I can't imagine why anyone uses cedar or other premium price wood when this stain makes pine look so good !
Date published: 2013-09-17
Rated 5 out of 5 by from Rich, Deep Color I am very happy I used the Australian Timber Oil, Honey Teak color, for my new deck. At first the color seemed darker than I expected, but now that it's done, I really like it. It has a rich, deep, burnished, and expensive look and also a nice sheen. My deck is 17x19 and 2nd floor, so I had railing, stairs, and underneath to do also, and I used exactly 5 gallons. I expected to use 2 gallons based on the stated 400-600 square foot coverage, so I guess my wood really soaked it up. I waited 5 months after building to apply it.
Date published: 2012-05-23
Rated 1 out of 5 by from Color, Finish, Stains are not what I was expecting Bought this weekend to apply to a new deck installed late spring. Used a pad applicator for the first coat and every single spot I lifted the applicator left a dark mark, and other dark sections. Some sections barely took any color and stayed light. The Honey Teak is about 10 shades darker than the sample on pine. The finish is almost a like a urethane you would see on a wooden bartop from the 80's. Upon applying a second coat, there were areas the stain wasn't able to soak in and let what looks like droplets. It's absolutely horrible. Bob Vila's site promoted this as the best option for a new deck and I couldn't be any more disappointed.
Date published: 2020-09-21
Rated 1 out of 5 by from NEW FORMULA - AVOID AT ALL COSTS I've been purchasing Australian Timber Oil (Natural) for my IPE hardwood deck for a # of yrs. now. Loved IT!! I live in Canada where harsh winters can play havoc on a deck. When applied, the product would last very well for more than 2 years before requiring another coat. Now they've changed the formula of the product and it is completely ineffective. Would not recommend this to ANYONE with hardwood. Suggest Messmers - products are outstanding and formula remains unchanged. After putting Australian Timber Oil on a test patch this year, it lasted less than one week in the full sun before fading significantly.
Date published: 2015-06-05
Rated 1 out of 5 by from Poor results I sanded my pressure treated deck down to remove all prior stain/water repellant product. Power washed it to remove the grit and dust. Let the wood dry for 3 days and then applied Jarrah Brown Australian Timber Oil as recommended. While wet it looked fine but after drying it was blotchy and after going through a winter it is dull. It does repel water nicely. I am extremely disappointed after going to all the time and trouble of sanding the deck to have it turn out like this. I would not recommend this product. Any suggestions on how to fix the blotchy appearance would be greatly appreciated.
Date published: 2016-05-22
  • y_2020, m_10, d_27, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_182
  • loc_en_CA, sid_87005072, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store