WOOD SPADE

Article#02445111 Model#3041002C Format5/8x6"
WOOD SPADE
 

Description

To drill in wood. The Speedbor Max spade bits are the fastest from the Speedbor line of products.

Technical specifications

You may also like

BOSCH
Glass and Tile Drill Bit - 1/4"
Format 1/4"
Article #19835551
Model #GT300
★★★★★ ★★★★★
1.8
(5)
BOSCH
Bosch Masonry Drill Bit - 1/4" x 6" - Carbon Steel
Format 1/4x6"
Article #19836321
Model #LBHX004
★★★★★ ★★★★★
1
(1)
BOSCH
Bosch Masonry Drill Bit - 3/16" x 6" - Carbon Steel
Format 3/16x6"
Article #19836320
Model #LBHX003
★★★★★ ★★★★★
5
(3)
BOSCH
Bosch-4-Piece Glass Tile Drill Bit Set
Format 4PC
Article #19835447
Model #GT2000
★★★★★ ★★★★★
3.3
(3)
BOSCH
Glass and Tile Drill Bit - 3/16"
Format 3/16"
Article #19835550
Model #GT200
★★★★★ ★★★★★
1
(1)
BOSCH
Drill Bit for Glass and Tile - 5/16''
Format 5/16"
Article #19835552
Model #GT400
★★★★★ ★★★★★
0
(0)
BOSCH
Titanium-Coated Metal Drill Bit - 1/8'' x 2 3/4'' - 2-Pack
Format 1/8x2 3/4"xPK2
Article #13545442
Model #TI2135
★★★★★ ★★★★★
0
(0)
BOSCH
CONCRETE DRILL BIT
Format 5/32x6"
Article #1983025
Model #HC2001
★★★★★ ★★★★★
3.6
(14)
BOSCH
Bosch Masonry Drill Bit - 5/32" x 6" - Carbon Steel
Format 5/32x6"
Article #19836319
Model #LBHX002
★★★★★ ★★★★★
0
(0)
BOSCH
CONCRETE DRILL BIT
Format 3/16x6"
Article #1983026
Model #HC2011
★★★★★ ★★★★★
4.2
(17)
BOSCH
Daredevil Standard Spade Bit Set - 3 Pieces
Format 3PC
Article #19835693
Model #DSB5003
★★★★★ ★★★★★
0
(0)
BOSCH
Daredevil Standard Spade Bit Set - 6 Pieces
Format 6PC
Article #19835694
Model #DSB5006
★★★★★ ★★★★★
5
(3)
BOSCH
Bosch® Wide Chisel Bit - 1 1/2"
Format 1/2x10"
Article #19835046
Model #HS1425
★★★★★ ★★★★★
4.9
(8)
BOSCH
Daredevil(TM) Standard Spade Bit - 1 1/4'' x 6''
Format 1 1/4"
Article #19835691
Model #DSB1017
★★★★★ ★★★★★
0
(0)
BOSCH
Square Insert Bit
Format #2x6"
Article #19835339
Model #CCSQ2601
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Masonry Drill Bit - 1/8" x 3" - Carbon Steel
Format 1/8x3"
Article #19836318
Model #LBHX001
★★★★★ ★★★★★
1
(1)
BOSCH
Titanium-Coated Metal Drill Bit - 1/4'' x 4''
Format 1/4x4"
Article #13545450
Model #TI2143
★★★★★ ★★★★★
0
(0)
BOSCH
Daredevil Extended-Length Spade Bit - 3/4" x 16"
Format 3/4"x16"
Article #19835683
Model #DLSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Masonry Drill Bits - 5/32" x 6" - Carbon Steel - 5/Pack
Format 5/32x6"x5PC
Article #19836325
Model #LBHX0025
★★★★★ ★★★★★
5
(1)
BOSCH
CONCRETE DRILL BIT
Format 3/8x4"
Article #1983028
Model #HC2061
★★★★★ ★★★★★
4.2
(36)
BOSCH
Glass/Tile Drill Bit - 1/8"
Format 1/8"
Article #19835549
Model #GT100
★★★★★ ★★★★★
1
(1)
BOSCH
Bosch Masonry Drill Bits - Carbon Steel - 7/Pack
Format 7PC
Article #19836328
Model #LBHXS7U
★★★★★ ★★★★★
4.7
(26)
BOSCH
Bosch Masonry Drill Bits - 3/16" x 6" - Carbon Steel - 5/Pack
Format 3/16x6"x5PC
Article #19836326
Model #LBHX0035
★★★★★ ★★★★★
4.5
(8)
BOSCH
Daredevil(TM) Standard Spade Bit - 1'' x 6''
Format 1"
Article #19835690
Model #DSB1013
★★★★★ ★★★★★
0
(0)
BOSCH
Square Insert Bit
Format #2x3"
Article #19835354
Model #SQ2301
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
WOOD SPADE is rated 4.2 out of 5 by 25.
Rated 5 out of 5 by from Tri-Flute Drill Bit woodboring I used this bit to install and anchor land scape timbers in a large project.Approximatley 2500 liner feet each timber was 8 ft long with anchor holes drilled through every 2 feet.rebar rods were hammered through the holes to keep them in place.Then a second timber was nailed to the top of each timber.This bit never dulled.and was used the next day to drill anchor holes in a deck railing.20ft long 12 feet wide.The bit is still sharp. I have since purchased 6 addition sizes for other projects we are doing in Oct,Nov.This is a very fast bit and would recommend it to anyone building decks,swings,landscape structures etc. Bob [This review was collected as part of a promotion.]
Date published: 2018-09-23
Rated 1 out of 5 by from Lost the bit with the first hole! I drilled into a tree for the treehouse I was building. On the first hole, I could not extract the bit--it would not back out- in reverse, forward, and/or straining myself to the max and I am a big strong man. The bit is still in the tree!! Tried a 1/2" of same design - controlling the boring very slowly and carefully. After half drilled, it pulled itself in to the max and would not come out, so now two of these brand new and expensive bits are permanently stuck in the tree!!!!! Hey Irwin----a heads up would have been nice!!! It may be ok for some other uses--but NEVER drill into a live tree. You will be going back to the store for old fashioned 2 blade wood bits..... R Sp-->
Date published: 2013-06-24
Rated 4 out of 5 by from Nice Bit This was a good bit. I bought it to bore out holes in a header board so I could plug them and then remount a sliding barn door. The bit was smooth and made a much cleaner hole then a traditional paddle bit does. I would definitely recommend this bit. The only nock I had against it is that it could get a little squirrelly on you if your not paying attention but that's how it is with a lot of things. also not I was using this bit on softwood and have not used it enough times to comment on durability. [This review was collected as part of a promotion.]
Date published: 2019-04-02
Rated 5 out of 5 by from Dentist likes his drill, In my office I use the finest carbide and diamond drills in my high speed handpieces for painless dental care. In my work shop, I demand the same quality and performance. That’s why I choose Irwin Products and my 5/8- inch drill bit performs with excellence. Its tri flutes are super sharp and balanced for a clean, vibration free result...and NO! I don’t use workshop drill bits in my dental practice! [This review was collected as part of a promotion.]
Date published: 2019-02-28
Rated 4 out of 5 by from As advertised I was not sure how this bit would do with my 1.5 amp battery on my cordless drill, but I was suprised at how easy the 5/8” bit chewed through the wood with a full battery. Drill did eventually end up getting hot, so I switched to the plug in drill and had no issues. Bit stayed sharp boring about 50 holes through 4x4 treated lumber. [This review was collected as part of a promotion.]
Date published: 2019-06-23
Rated 1 out of 5 by from Looks pretty but don't expect it to do anything I bought this "fasted speedbor ever" drill bit to drill a hole in the fence post. Once the tip got into the wood, it stopped and wouldn't turn at all. I returned it and got a regular 5/8 drill bit and it got the job done without a problem. This one might work if you were drilling through soft wood, but not if you want it to do any real work.
Date published: 2014-02-16
Rated 3 out of 5 by from Tri-Flute Drill Bit Very few 5/8' wood drill bits available but had to settle for a tri-flute bit. Would preferred a 3/8" shank instead 1/4" shank. Too much tear-out. Preferred a wood twist drill bit but the store did not have any in stock. [This review was collected as part of a promotion.]
Date published: 2018-08-26
Rated 5 out of 5 by from Irwin 5/8 drill bit Needed a long 5/8 in drill bit for hiding a wifi router cable behind a cabinet. I then used it to drill several holes in decking to release a water blockage. Worked great on the different materials I had to drill thru. [This review was collected as part of a promotion.]
Date published: 2019-06-27
  • y_2020, m_10, d_26, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_en_CA, sid_02445111, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store