DEWALT

Yellow and Black Steel Right Angle Attachment

Article#00275755 Model#DWARA100

DEWALT

Yellow and Black Steel Right Angle Attachment

Article#00275755 Model#DWARA100

Description

The Dewalt right angle attachment is designed to give better accessibility to drive screws and drill holes in tight spaces. Its fasteners are supported by floating magnets that have a high durability. The ergonomic handle provides a secure grip and does not get hot while in use. It has a 1/4" hex chuck that accepts any 1/4" shanked accessory like drill bits, drivers, nut drivers and hole saws. The product is made with steel and is yellow and black in color.

Technical specifications

Component :Steel Color :Yellow, Black Utilization :Drill, Fasten, Hard to Reach Places Size :1/4"

Yellow and Black Steel Right Angle Attachment is rated 4.2 out of 5 by 84.

Rated 5 out of 5 by TJF from This is the tool you've always needed! This tool is great for drilling or driving screws in hard to reach places. It will not replace a true right angle drill for every task, but for things like assembling furniture or cabinets this is a lafesaver. It can get in spaces that a typical right angle drill wouldn't fit into. The only things to note is that it requires that you hold your drill/driver and this attachment, so if you also have to hold the work piece, you need three hands or have to get creative. The only other thing to note, is that if you want to use it to drill holes, it does not have a chuck, so you need a set of drill bits with hex shanks.

Date published: 2018-02-25

Rated 5 out of 5 by Carder from Great for hard to reach areas I used this product on a black and decker right angle drill. Needed to reach dash area in car right at the windshield. This was the perfect tool. As with all Dewalt products, feels very well made. Very happy!

Date published: 2013-11-15

Rated 1 out of 5 by Ryan from Great idea, but POOR execution This may work to put screws in, but do not buy this to drill holes with. I tried to use this to drill a small hole with a spade bit and the gears stripped the very first time I used it. If this would have worked it would be one of the top items in my toolbox. They need to make one with more heavy duty gears and this would be a must have for everyone.k

Date published: 2016-02-28

Rated 4 out of 5 by MikeTheRetiredActuary from Does What I Needed This item did what I needed it to do, but it has some drawbacks that you quickly learn. I needed to drill starter holes and then screw in some screws in a cabinet with tight space. This attachment did the job. The main negatives I found were: 1. There is virtually no information included with the attachments telling you how to use it. You essentially find how to use it by trial and error. 2. You cannot lock it into one position, so it just flops around. This means you must be able to use both hands: one to hold and use your drill and the other to hold the attachment in the desired position. This can lead to some odd and uncomfortable body positions depending on where you are working. 3. Your drill bit or screwdriver bit does not lock into the attachment. It supposedly has a magnet to hold the bit in, but I did not find this magnet strong enough to really hold the bit, especially when I was trying to back the drill bit out of the hole. 4. As other reviews have noted, reversing the drill to back out the bit after you have drilled the hole does not work very well. You will probably just use your hand to back the bit out. In spite of these drawbacks, however, I like the product because it enabled me to do my project better and easier than if I would have experienced if it all had been done manually. I would buy the product again even with these caveats, and I will use it again when I need to work in tight places.

Date published: 2014-10-07

Rated 5 out of 5 by ElCheapo from worth the money I have 3 right angle drives, including a dewalt right angle drill cost me $200 about 10 years ago; this one is cheaper by $175 and fits in tighter space, I love it. Someone else commented this was a use less tool I was little bit concerned about it. After using it to drive about 15 deck screws 3" in length between 2X4 wall studs above mud sill plate , I am happy that I bought it.

Date published: 2016-05-21

Rated 5 out of 5 by Dave from DeWalt never thought of this Have an application that requires me to remove me to remove 4 each 5/8 NC bolts from inside a crosshead. This job usually takes 2 hours or so because it is so confined. Used this attachment with a 15/16 3/8 drive socket and cut this time down to 10 minutes.

Date published: 2014-12-12

Rated 3 out of 5 by CosBulldog from Lightweight Asset Used this to drill some tight-space holes in wood. Worked well but caution that although it says impact ready, I would not recommend it for anything other than lightweight wood drilling, or very cautious heavier duty. Also note that it requires specific sized hex drill bits to fit in its driver socket.

Date published: 2017-10-05

Rated 5 out of 5 by RD34 from Just the "right angle" to complete your job! I saw this and it appeared to be just the tool needed to install baby proof locks on the drawers in the kitchen and bathroom... and boy did this work as I had hoped. With the short drill bit that fits into this the drawer openings only have to be a minimum of 3.5 inches !!!! This will be very useful in tight places and corner drilling.

Date published: 2015-09-05

Yellow and Black Steel Right Angle Attachment Reviews - page 2

Yellow and Black Steel Right Angle Attachment

Yellow and Black Steel Right Angle Attachment

Description

You may also like

Technical specifications

Changing store

Spring - Summer 2019

Gazebos & Pergolas

Outdoor Decor

Landscaping

Sheds & Storage

Decks & Verandas

BBQs

Outdoor Furniture

Fireplaces & Patio Heaters

Outdoor Power Equipment

Yellow and Black Steel Right Angle Attachment

Yellow and Black Steel Right Angle Attachment

Description

You may also like

Technical specifications

Changing store