StudSensor L50 Stud Finder - Yellow

Article #68855010 Model #66995
StudSensor L50 Stud Finder - Yellow
 

Description

This Zircon StudSensor(TM) L20 stud finder is ideal for all your installation or renovation projects. It has a patented pinch grip design for an easy and secure hold in either hand, at any angle. With its easy-to-read display and its SpotLite® pointer, it clearly identifies the edges of studs and joists behind walls, floors, and ceilings. Its WireWarning® detection indicates the presence of live AC voltage up to 2" deep. The StudScan mode locates edges of wood or metal studs in walls up to 3/4" deep and the DeepScan® mode doubles the scanning depth to 1 1/2". It features a V groove for an accurate marking of the stud a "READY" light to indicate when calibration has completed successfully. This product is backed by a 1-year warranty.

  • Find the edges of wood or metal studs and joists up to 1-1/2-in deep to securely hang pictures, mirrors, shelves, cabinets, and more
  • WireWarning Detection indicates the presence of hot electrical wiring
  • Easy-to-read display screen
  • SpotLite Pointer shines a bright arrow to clearly indicate stud edge
  • Patented "over-the-stud" indicator alerts you to scan in a new location should scanning begin over a stud
  • A brand new 9V alkaline battery is required for proper operation

Technical specifications

Width(mm) :71.12 Width(in) :2.8 Automatic Operation :No Battery Charger Included :No Battery Included :No Battery Required :Yes Battery Size :PP3 (9V) Case Included :No Color/Finish Family :Yellow Depth(cm) :4.2926 Depth(in) :1.69 Depth(mm) :42.926 Detects Live Wires :Yes Display Type :N/A Length(cm) :16.9164 Length(in) :6.66 Length(mm) :169.164 Level Included :No Magnetic :No Material :Plastic Object Detection :Metal and wood stud Scan Depth(cm) :3.81 Scan Depth(in) :1.5 Scan Depth(mm) :38.1 Series Name :StudSensor L50 Stud Finder with WireWarning Sound Indicator :Yes Warranty :1-year limited Width(cm) :7.112

You may also like

ZIRCON
Zircon L40 Stud Finder - Yellow
Article #68855009
Model #66994
★★★★★ ★★★★★
3.3
(139)
BOSCH
Bosch Self-Leveling Cross-Line Laser Plumb Points 65-ft
Format 65'
Article #19836584
Model #GCL2-160
★★★★★ ★★★★★
0
(0)
BLAZE
Bosch BLAZE Laser Measure Graphic Display 100-ft
Format 100'
Article #19836625
Model #GLM100-23
★★★★★ ★★★★★
4.3
(26)
CRAFTSMAN
CRAFTSMAN 1-In x 25-Ft Self-Locking Heavy-Duty Measuring Tape with with rubber overmoulding
Format 1"x25'
Article #00276608
Model #CMHT37225S
★★★★★ ★★★★★
4.6
(34)
BOSCH
Bosch Self-Leveling Cross-Line Laser Red Beam with Support 50-ft
Format 50'
Article #19836623
Model #GLL50-20
★★★★★ ★★★★★
0
(0)
JOHNSON
Johnson Heavy-Duty Angle Square - Aluminum - 7-in
Format 7"
Article #0704054
Model #RAS-1B
★★★★★ ★★★★★
3.5
(2)
ZIRCON
StudSensor L20 Stud Finder - Yellow
Article #68855006
Model #66993
★★★★★ ★★★★★
3
(241)
BOSCH
Bosch Self-Leveling Cross-line Laser Level with 40-ft Range
Format 40'
Article #19836269
Model #GCL2-55
★★★★★ ★★★★★
4.4
(34)
GENERAL
General Plastic LED Digital Moisture Detector
Article #01215202
Model #MMD4E
★★★★★ ★★★★★
4.3
(127)
BOSCH
GLL3-15 Self-Leveling Three-Line Laser Measure - 50-ft
Format 50'
Article #19836072
Model #GLL 3-15
★★★★★ ★★★★★
4
(52)
JOHNSON
Johnson Professionnal T-Square - Tempered Aluminum - 90° - 48-in x 22-in
Format 48"
Article #0704049
Model #JTS48
★★★★★ ★★★★★
4.2
(16)
JOHNSON
Carpenter's Pencil - Box of 40
Format BX40
Article #36985002
Model #40-0661
★★★★★ ★★★★★
0
(0)
BOSCH
Self-Levelling Cross-Line Laser with Mounting Device - 40-ft
Format 40'
Article #19836291
Model #GLL40-20G
★★★★★ ★★★★★
4
(37)
LUFKIN
Measuring Tape - Control Series - 1 3/16-in x 25-ft - Black Blade
Format 1 3/16"x25'
Article #01855530
Model #L1025CB-02
★★★★★ ★★★★★
2.8
(4)
CRAFTSMAN
CRAFTSMAN Stud Sensor - 1 1/2-in Depth - Red and Black
Format 1.5"
Article #00276605
Model #CMHT77621
★★★★★ ★★★★★
2.9
(147)
LUFKIN
Shockforce Measuring Tape - Dual Sided - 26-ft
Format 1-3/16"x26'
Article #01855522
Model #L1125CME-02
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Blaze Pro Compact Laser Measure - 165-ft Range
Format 165'
Article #19836453
Model #GLM165-40
★★★★★ ★★★★★
4.6
(34)
CRAFTSMAN
CRAFTSMAN I-Beam Level 48-in 360° Vials Aluminum Red and Black
Format 48"
Article #00276925
Model #CMHT82345
★★★★★ ★★★★★
4.4
(70)
CRAFTSMAN
CRAFTSMAN Stud Sensor - 3/4-in Depth - Red and Black
Article #00276604
Model #CMHT77620
★★★★★ ★★★★★
2.9
(160)
BOSCH
Distance Measuring Laser - BLAZER GLM20 - 65-ft Range
Format 0-65'
Article #19835938
Model #GLM20
★★★★★ ★★★★★
4.8
(11)
BOSCH
Bosch Green-Beam Five-Point Self-Leveling Alignment Laser 100-ft
Format 100'
Article #19836455
Model #GPL100-50G
★★★★★ ★★★★★
4.5
(28)
CRAFTSMAN
CRAFTSMAN Stud Sensor - Edge Detection - 3/4-in - Red/Black
Format 3/4"
Article #00276741
Model #CMHT77633
★★★★★ ★★★★★
3.2
(204)
BOSCH
Bosch VisiMax Self-Leveling Cross-Line Laser with Support Green Beam 50-ft
Format 50'
Article #19836624
Model #GLL50-20G
★★★★★ ★★★★★
3
(1)
BOSCH
GLL30 Self-Leveling Cross-Line Laser Measure - 30-ft
Format 30'
Article #19836143
Model #GLL 30
★★★★★ ★★★★★
3.8
(146)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
StudSensor L50 Stud Finder - Yellow is rated 3.8 out of 5 by 606.
Rated 1 out of 5 by from VERY inconsistent results when you pass this device over smooth unblemished painted drywall it will tell you where the stud is so you mark it. You should always repeat that a 2nd time to confirm, & this thing will tell you where the stud is again except it's not the same location as it said in the 1st scan. Do it 5 more times & it will pass right by the stud or it will show different stud location each time. Don't go drilling 10 holes in your wall- scrap this Zircon junk & go buy a reliable one. I was hanging a hand railing for our stairs & I would have gotten REAL bothered by drilling dozens of holes in wrong places that I had to repair, except I trashed this junk before drilling.
Date published: 2022-07-13
Rated 4 out of 5 by from Just finished hanging my tv I read the 5 star rating of the stanley $10 stud finder and decided to give it a try. It kept giving me false stud readings. I'm sure that the walls aren't completely made of studs so I returned it and picked up this model so I can see when I am approaching a stud. I couldn't get a beep but I noticed that it started to detect then loose it after I pass the area. I decided to mark the place where the signal was it highest even though it didn't beep and when the bar went down. I did a test drill and hit a stud. I also noticed that the drywall was extremely thick so I set it on deepscan mode and it worked from there. Not exact as the readings varied every time put I managed.
Date published: 2011-10-23
Rated 5 out of 5 by from Works awesome. I was hesitant after reading the lower reviews but decided to go for it based off of the positive reviews. I'm glad I did. I recommend reading the instructions, following them, and spending a little time messing around with it before putting to use. I particularly like the part of the instructions that mentions using common sense and "mapping out" your wall. It makes a lot of sense to me. I think if someone just pulled it out of the package, tried to figure it out, and assumed it just automatically and magically locates studs they would be discouraged. It does work very well once you are familiarized with the operation. Best stud finder I've ever used by far.
Date published: 2022-01-27
Rated 4 out of 5 by from Good Purchase Needed a stud finder in a pinch to put a projector on the ceiling. At first I thought it was a bad stud finder, found these reviews and was disappointed that I didnt check before I bought. After attempting several times and not able to find the studs, my wife suggested maybe the ceiling studs were the opposite direction. Jokingly I scanned that way and whaddya know the stud finder found them. After a couple of test holes, I verified that the finder was actually working correctly. The lines were even semi-accurately showing edges of my metal studs. Overall good product.
Date published: 2011-10-23
Rated 5 out of 5 by from Excellent Investment I needed a new stud finder and after reading reviews, I purchased this one. I am a beginner as I am doing some work recovering from the flood of my home. I installed the wood shelves in one of my linen closets. After reviewing internet videos and have watched others do similar work, I was able to accomplish the work. I also particularly like the fact this product alerts of any active wiring behind the walls. I didn't even think about that until I was looking at what products were available in Lowes. So this helped me tremendously! Takes me a little longer than most to get the job done. I'm learning and loving it.
Date published: 2016-02-27
Rated 5 out of 5 by from Works Great As a professional handyman, I've used it many times since I purchased it, and I think it's the best balance between accuracy, ease of use, and price. It shows the edges of the studs and the center, so there's no guesswork. It will also alert if it detects an electrical current. It even has a normal scan mode and a deep scan mode. In my experience, it has been completely reliable, and I'm very pleased with it.
Date published: 2016-08-20
Rated 4 out of 5 by from Has tripped up once Bought this model for its nice balance of features and price dispite the fact that the demo unit in the store was clearly defective (off by 1/2" when scanning to the right, to the left just fine....weird). Have used it several times since purchasing and it has worked perfectly. I would recommend running a "deep scan" to double check for electrical lines after you have located the stud in normal mode. It missed a line once in normal but showed it deep scan, but just once. Could have been operator error but now I double check just to be safe. Overall, very good choice for a deep scanning unit without all the eye candy extras of more expensive models.
Date published: 2016-05-04
Rated 5 out of 5 by from Works Perfectly Well I read lots of reviews of various stud finders, lots of reports says "did not work ". Mine worked fine. I think people may be missing a simple step when they use the stud finders. Calibrate! So simple with this unit and I would guess almost any stud finder. Hold the unit flat against the wall and press and hold the button. The unit will buzz and flash a red light for just a second and it will read "Ready" in the corner of the display. The unit is now "Calibrated" and ready to find studs. It only took 5 seconds! If you release the button you must recalibrate it but no big deal, it's fast to do. You must continue with the button held down. Slowly cross the wall until the red light arrow points and mark that point. Continue till the red light goes off. Mark that point and in between the two marks will be the center of the stud. If you can't get a red arrow to light up try the "Deep Scan" setting. Oh, and be sure to use a good battery.
Date published: 2015-05-23
  • y_2024, m_2, d_15, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_606
  • loc_en_CA, sid_68855010, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store