Adaptateur pour bordure de toit

Article#0128074 Modèle#T0539
Adaptateur pour bordure de toit
 

Caractéristiques

Assemblage de bordure de toit. Prête à être utilisée lorsque le chevron est exposé à l'extérieur ou que la bordure n'est pas perpendiculaire au sol.

Spécifications techniques

Vous pourriez aussi aimer

EURAMAX
Rallonge de descente de gouttière
Format 2x3-3x4"
Article #7642001
Modèle #85510
★★★★★ ★★★★★
0
(0)
AMERIMAX
Rallonge de descente de gouttière
Format 2x3-3x4"
Article #7642002
Modèle #85519
★★★★★ ★★★★★
5
(1)
AMERIMAX
COUDE FLEXIBLE
Article #76425000
Modèle #37084
★★★★★ ★★★★★
4,5
(22)
EURAMAX
Rallonge de descente de gouttière
Format 2x3-3x4"
Article #01285035
Modèle #85514
★★★★★ ★★★★★
0
(0)
FLEX-A-SPOUT
Rallonge pour descente de gouttière, noir
Article #01285096
Modèle #85515
★★★★★ ★★★★★
5
(1)
EURAMAX
Attache dissimulée en aluminium pour gouttière, 5"
Article #76745071
Modèle #210121
★★★★★ ★★★★★
4,5
(64)
AMERIMAX
Rallonge de descente de gouttière
Format 2x3-3x4"
Article #7642003
Modèle #85511
★★★★★ ★★★★★
0
(0)
EURAMAX
Gouttière en vinyle traditionnel, 10 pi
Format 3M
Article #0128076
Modèle #M0573
★★★★★ ★★★★★
1,9
(9)
EURAMAX
Coude latéral « B » en aluminium, blanc
Article #76745015
Modèle #27065
★★★★★ ★★★★★
4,3
(9)
EURAMAX
TUYAU DE DESCENTE
Format 2x3"x10'
Article #76745004
Modèle #2601000120
★★★★★ ★★★★★
4,1
(79)
EURAMAX
Coude avant « A » en aluminium, blanc
Article #76745014
Modèle #27064
★★★★★ ★★★★★
3
(2)
EURAMAX
Tuyau de descente pour gouttière « traditionnel » en vinyle
Article #0128098
Modèle #M0593
★★★★★ ★★★★★
4,7
(47)
Plaque d'écoulement pour gouttière, 24", noir
Format 24x11.5x2"
Article #01285095
Modèle #3005-12
★★★★★ ★★★★★
0
(0)
AMERIMAX
COUDE FLEXIBLE
Article #76425001
Modèle #3708419
★★★★★ ★★★★★
5
(2)
EURAMAX
Ensemble d'embouts de gouttière « traditionnels », vinyle
Format PK2
Article #0128103
Modèle #M0611
★★★★★ ★★★★★
4,5
(31)
EURAMAX
Tuyau de descente, brun
Format 2x3x10'
Article #76745018
Modèle #2401019120
★★★★★ ★★★★★
4,2
(18)
PRIMEAU
VIS EN ACIER INOXYDABLE HO-DO
Article #55655024
Modèle #02890
★★★★★ ★★★★★
0
(0)
PRIMEAU
Bande ornementale Ho-Do
Article #55655018
Modèle #02190
★★★★★ ★★★★★
0
(0)
PRIMEAU
COUDE« B » HO-DO
Article #55655012
Modèle #01590
★★★★★ ★★★★★
0
(0)
Gouttière en aluminium K-Style, 5" x 10', noir
Format 5"x10'
Article #01285085
Modèle #2400635120
★★★★★ ★★★★★
0
(0)
Tuyau de descente K-STYLE, aluminium, 2"x 3" x 10', noir
Format 2x3"x10'
Article #01285076
Modèle #2401035120
★★★★★ ★★★★★
0
(0)
EURAMAX
TUYAU D'EXTENSION
Format 15"
Article #76745003
Modèle #27075
★★★★★ ★★★★★
3,5
(6)
QUEST
Protège-gouttière
Format 6"x25'
Article #1401016
Modèle #VGG625
★★★★★ ★★★★★
0
(0)
EURAMAX
Capuchon d'extrémité gauche en aluminium, 5", blanc
Article #76745007
Modèle #27005
★★★★★ ★★★★★
2,8
(5)
EURAMAX
Coude avant « A » en aluminium, brun
Article #76745029
Modèle #2526419
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Adaptateur pour bordure de toit est évalué 3.0 de 5 de 3.
Rated 4 de 5 de par This saved me loads of time on sloped fascia The first few were a bit difficult to put in, and I made a lot of holes. After that, I developed a system and was successful. These hangers make the job a bit clunky, but the real issue is the slant on the fascia. So you just need to install one hanger successfully, at the right level, with one these hangers in place and then remove it. Measure where the hole is in relation to you snap line, and you are golden. Also, use longer screws. I used 3 inch deck screws and that allowed me to screw the screw about an inch to an inch and a half past the hanger to put some pressure on the hole where I want to screw into the fascia (if that makes sense). Once this challenge was overcome, the rest went in fine. Beats cutting a bunch of wooden wedges and having to prime them (really adds a lot of time to your DIY job and I usually only have my weekends to get this done). Hope this helps... [This review was collected as part of a promotion.]
Date de publication: 2019-10-05
Rated 4 de 5 de par Other reviews may be incorrect I think these wedges are attached to the back of the gutter... NOT the facial (as other reviews indicate). Then the gutter is attached to the facial using standard gutter hangers. "Ideally" (?) the screw on the hanger should go thru the top hole of the wedge, but I'm not sure how easy that is. Full disclosure, I have not used these wedges, just drawn this conclusion by searching internet and thought other 2 reviews are probably misleading. [This review was collected as part of a promotion.]
Date de publication: 2019-10-25
Rated 1 de 5 de par Just not a good design The design of these hangers leaves much to be desired. To say that it's difficult to screw through the regular hangar, into these hangars, and then into your fascia board would be an understatement. It doesn't seem like it would be that difficult by looking at them on the shelf in the store, but realize that because of the way these (and the accompanying gutter hangars) are designed, you won't be driving a screw perpendicularly into your fascia. You will be driving in at a significant angle, and the likelihood of not getting good purchase into your fascia is high. I skewered my fascia pretty good in a few spots before giving up. If you really wanted to use these, you would need a longer screw (at least 2"), and probably have to drill pilot holes to ensure that the screw goes in where you want it. That would also help keep the whole assembly from shifting down as you drive the screw home. But... ain't nobody got time for that! Once you do have them in, you'll realize that one measly hole at the top of the hangar doesn't actually secure the piece behind the gutter. It rotates fairly easily. I quickly realized that my shed could survive with angled gutters, and saved quite a bit of money by returning these things. [This review was collected as part of a promotion.]
Date de publication: 2019-10-02
  • y_2020, m_5, d_26, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_fr_CA, sid_0128074, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin