Décor d'HalloweenDécorations gonflablesÉclairage et effets spéciaux Décorations d'intérieurDécorations d'extérieur

Ancrage «DrillerToggle» pour mur creux, 3/16" x 2", 6/pqt

Article#0484401 Modèle#363R Format3/16"x2"xPK/6
Ancrage «DrillerToggle» pour mur creux, 3/16" x 2", 6/pqt
 

Caractéristiques

L'ancrage pour mur creux en gypse DrillerToggle(MD) offre la force de retenue d'un boulon avec ailettes à ressort et la facilité d'installation des ancrages WallDriller(MD). En effet, le mécanisme de bascule lui accorde une capacité de retenue accrue dans le gypse tandis que sa pointe autoforeuse facilite l'installation. En effet, sa bordure acérée réduit la force requise pour couper le matériau, ce qui permet un montage rapide et sans dégâts. Ce modèle mesure 3/16" x 2" et est vendu en paquet de 6 unités, mais les ancrages DrillerToggle(MD) sont disponibles dans plusieurs formats et emballages selon vos besoins.

Vous pourriez aussi aimer

COBRA
Ancrages et vis autoforeurs «Walldriller», #6, 12 PK
Format #6xPK12
Article #0484472
Modèle #016R
★★★★★ ★★★★★
0
(0)
COBRA
Ancrages avec vis « WallDriller »,
Format #8xPK10
Article #0484473
Modèle #029R
★★★★★ ★★★★★
0
(0)
COBRA
Ancrages avec vis « WallDriller »
Format #8LxBT/25
Article #0484167
Modèle #021M
★★★★★ ★★★★★
0
(0)
FLIP TOGGLE
Ancrage «FlipToggle» avec boulons, 1/4" x 2 1/2", 10/pqt
Format 1/4"x2.5"xPK10
Article #04845651
Modèle #425R
★★★★★ ★★★★★
5
(2)
COBRA
Ancrage autoforeur «Walldriller» avec vis, #8, 500/pqt
Format #8LxBT500
Article #04845676
Modèle #021X
★★★★★ ★★★★★
0
(0)
COBRA
Ancrages avec vis « WallDriller »
Format #8LxBT/25
Article #0484168
Modèle #041M
★★★★★ ★★★★★
0
(0)
COBRA
Cheville en plastique avec mèche TripleGrip(TM) # 6, pqt/20
Format #6
Article #0484443
Modèle #170R
★★★★★ ★★★★★
0
(0)
COBRA
Cheville en plastique, 1 1/4'', bte/75, bleu
Format 1 1/4"xBT75
Article #0484173
Modèle #193M
★★★★★ ★★★★★
0
(0)
COBRA
Ancrage autoforeur «Walldriller» avec vis, zinc, 500/pqt
Format #8xBT500
Article #04845677
Modèle #041X
★★★★★ ★★★★★
0
(0)
COBRA
Ancrages et vis autoforeurs «Walldriller», #8, 10 PK
Format #8xPK10
Article #0484478
Modèle #042R
★★★★★ ★★★★★
0
(0)
COBRA
Ancrages avec vis « WallDriller »
Format #6xBT/50
Article #0484169
Modèle #013M
★★★★★ ★★★★★
0
(0)
COBRA
Cheville en plastique TripleGrip(MC) # 12, 1 5/8'', pqt/8
Format #12
Article #0484422
Modèle #173R
★★★★★ ★★★★★
4,2
(37)
COBRA
Ancrage «DrillerToggle» pour mur creux, 3/16" x 2", 2/pqt
Format 3/16"x2"xPK/2
Article #0484394
Modèle #363S
★★★★★ ★★★★★
0
(0)
FLIP TOGGLE
Ancrage «FlipToggle» avec boulons, 1/4" x 2 1/2", 2/pqt
Format 1/4"x2.5"xPK2
Article #04845650
Modèle #425S
★★★★★ ★★★★★
3,7
(3)
COBRA
Cheville en plastiqueTripleGrip(TM) # 6, pqt/6
Format #6xPK6
Article #0484442
Modèle #170S
★★★★★ ★★★★★
1
(1)
FLIP TOGGLE
Ancrage «FlipToggle» avec boulons, 3/16" x 2 1/2", 10/pqt
Format 3/16"x2.5"xPK10
Article #04845652
Modèle #420R
★★★★★ ★★★★★
5
(3)

Spécifications techniques

Couleur :Blanc Style :Pour mur creux Modèle :DrillerToggle(MD) Composante :Nylon/zinc Installation :Tournevis (vis incluses) Largeur :3/16" (0,48 cm) Longueur :2" (5,08 cm) Capacité :100 lb (45,36 kg) Emballage :6/paquet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Ancrage «DrillerToggle» pour mur creux, 3/16" x 2", 6/pqt est évalué 4.1 de 5 de 9.
Rated 5 de 5 de par What a great drywall anchor!! I was looking for something to attach a clothes drying rack in my laundry room and the studs in the wall weren't cooperating. I needed something pretty strong, so I checked out these toggle screws. They went in without a hitch using nothing but a phillips-head screwdriver and really locked down tight. Now, the only thing is you have to be sure you don't run into a stud and have plenty of space behind the drywall, but I did, luckily, and now the drying rack is firmly in place and can handle heavy, wet things like towels and bathing suits (it hangs over the laundry sink so drips are handled nicely). The product is Canadian and American made, too.
Date de publication: 2013-09-16
Rated 1 de 5 de par Terrible Terrible Product These were the biggest waste of $$. Stick with the all metal drywall anchors and you'll be happy. Had I been able to get these back out of the wall without damaging my walls further I would have returned them for a refund.. this is without a doubt the worst anchor I've ever used.. only tried them because they looked to have more depth to them. Problem with these anchors is that none of them.. and I tried 8 of them. None would tighten up.. and it just spun in the drywall. Fortunately I was able to cover the holes made by these with my shelving rails and used the all metal anchors with no issue. Again.. unless you want to destroy your drywall and not have a functional anchor.. you need to avoid these.
Date de publication: 2014-03-07
Rated 5 de 5 de par Great Holding Power but has Install Quirks The product has great holdIng power once it's installed and requires a smaller hole in the wall compared to a traditional butterfly anchor. Here's what to consider when deciding on it for an install. -The wall must not be filled with any insulation since that will prevent the holding mechanism from extending, which effectively limits the use to only internal walls. -The depth of the wall must be about 1 inch deeper than the screw length to allow the holding mechanism to extend. -The self-drilling mechanism didn't work that well for me; the shaft of the ancher got caught after the drill-head went in the wall. So, I drilled a pilot hole the same diameter of the shaft exactly where I wanted the hole. -If you need to install adjacent to a stud, you'll need to first drill the pilot hole and then hand screw the anchor into place with a screwdriver to ensure that the screw mechansism flips upward. By hand, it is easier to control the pressure to get the anchor arrow vertical; about a 1/4 turn. If it's not vertical, the mechanism will hit the stud when extending. You may want to practice this step in a wall that you can spackle if you get it wrong. The anchor can be taken out of the wall by unscrewing, however, not always very easily due to the screw mechism, which may open partially. -Once it's in the wall, screw into it until the mechanism tightens. After that, you can unscrew and re-screw as needed. I've never had a problem with the anchor once it was in. This is valuable information; may it be a blessing to you. <><
Date de publication: 2012-06-13
Rated 5 de 5 de par Great wall anchor I used these to "re-secure" a shelf which had loosened from 'screw-in" style wall anchors, so a hole already existed. (unfortunately-no studs avail) Screwed these into place (do not over tighten-no need), inserted screw through my shelf's required wall bracket, and tightened until very snug. These are a bit more expensive than some anchors, but if you want to do the job once-then use these!
Date de publication: 2014-01-19
Rated 5 de 5 de par Works exactly like I hoped they would do. I bought these (110 pound rating) to use to hold the seat base plates to the floor of my fishing boat. The original screws were pulling out of the plywood and I wanted something heavy duty to replace them. Because they are intended to self tap into drywall, I had to drill out the plywood to accommodate the toggles but that was a minor inconvenience.
Date de publication: 2013-07-10
Rated 5 de 5 de par Surprised I was surprised at the ease of installation., Care must be taken to align the arrow counterclockwise to where it be when tight. I found the 8 o'clock position to be good. also take care not to tighten too much or the sheetrock may break. Just snug up with the arrow at the 12 o'clock postion when snug. Great product!
Date de publication: 2014-01-29
Rated 5 de 5 de par Best wall anchor ever... First time I ever used this product, and it will not be the last, these anchors are the strongest, and the easiest I have ever used. Their design is fantastic, a simple idea that really worked!
Date de publication: 2014-07-21
Rated 1 de 5 de par Pure garbage, avoid All six anchors in the package failed. The screws that thread into the white metal/lead anchor stripped with two fingers on the screwdriver. Please stop selling this garbage.
Date de publication: 2019-08-10
  • y_2020, m_1, d_27, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_fr_CA, sid_0484401, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin