Arbre de scie-cloche Craftsman, 3/8 po dia, pointe en croix, tige hexagonale, acier carbone

N° d'article 00276995 N° de modèle 2063303 Format3/8"
Arbre de scie-cloche Craftsman, 3/8 po dia, pointe en croix, tige hexagonale, acier carbone
 

Caractéristiques

Personnalisez vos projets de découpe de trous grâce à cet arbre de scie-cloche Craftsman. L'arbre de la scie est constitué principalement d'acier pour une résistance supplémentaire. La conception de ce modèle à changement rapide permet un enclenchement et un retrait faciles. Il est polyvalent et disponible en différentes tailles. Ce modèle pour scie-cloche a un diamètre de 3/8 po.

  • Durabilité accrue. Acier au carbone trempé pour plus de résistance
  • Foret pilote à pointe fendue pour une pénétration plus rapide et moins de déplacement
  • Conception à changement rapide, plus rapide et plus facile pour engager/désengager la scie cloche
  • Empêche les filets de s'effilocher, en conduisant les goupilles et non les filets

Spécifications techniques

Compatible avec les dimensions de scie-cloche :1 1/4 po à 6 po, Matériau :Acier au carbone Description de modèle :Raccord centré 1-1/4 - 6 po Arbor 3/8 po TG Quantité par emballage :1 Changement rapide :Oui Grosseur de la tige :3/8 po Type de tige :Hexagonal

Vous pourriez aussi aimer

MONO SERRA
Brides de nivellement, 200/sac
Format 200SC
N° d'article 84665637
N° de modèle RU-2841
★★★★★ ★★★★★
2,5
(4)
RICHARD
Taloche à coulis pour coin arrondi Richard, base en aluminium, semelle en mousse caoutchoutée, 9 po L. x 4 po l.
Format 9X4"
N° d'article 0271024
N° de modèle 18958
★★★★★ ★★★★★
5
(1)
Mélangeur pour composé à joints et de coulis, 24 po x 4 po
Format 24"
N° d'article 02715470
N° de modèle 05043
★★★★★ ★★★★★
1
(1)
Éponges à ciment professionnelle Richard, mousse de caoutchouc, jaune, 8 po L x 5 po l x 2 po E, paquet de 3
Format 8x5x2"xPK3
N° d'article 02715447
N° de modèle 05596
★★★★★ ★★★★★
3
(2)
RICHARD
Taloche à coulis Richard, base en aluminium, semelle en mousse caoutchoutée, poignée en plastique, 9 po L. x 4 po l.
Format 9x4x5/16"
N° d'article 0271249
N° de modèle 18955
★★★★★ ★★★★★
3
(2)
HAUSSMANN
Coupe-carreaux manuel Haussman, coupes parallèles, base en métal de 165 mm de large, 14 po L.
Format 14"
N° d'article 68125123
N° de modèle XTCD-14
★★★★★ ★★★★★
2
(6)
HAUSSMANN
Scie à eau de table pour carreaux Haussman, 5,8 ampères, 120 V, lame de 7 po de diamètre
Format 7"x120Vx5.8A
N° d'article 68125119
N° de modèle CMS158B
★★★★★ ★★★★★
1,5
(2)
MONO SERRA
Cales de nivelage, 100/sac
Format 100SC
N° d'article 84665638
N° de modèle RU-2843
★★★★★ ★★★★★
0
(0)
RUBI
Ensemble de nivelage RUBI(MD), delta
N° d'article 84666066
N° de modèle RU-3903
★★★★★ ★★★★★
4
(1)
RICHARD
Éponge à ciment professionnelle Richard, mousse de caoutchouc, jaune, 8 po de long x 5 po de large x 2 po d'épais
N° d'article 0271271
N° de modèle 05598
★★★★★ ★★★★★
0
(0)
RICHARD
Croisillons de carrelage en plastique Richard, blancs, 1/8 po de large, paquet de 200
Format 1/8"XPK/200
N° d'article 0271250
N° de modèle 102343
★★★★★ ★★★★★
0
(0)
Pince pour système de nivelage Richard, noire, fer, adaptateur pour petites cales
N° d'article 02715551
N° de modèle 05710
★★★★★ ★★★★★
1
(3)
RICHARD
Truelle dentelée pour maçon Richard, acier, poignée de polypropylène, 9 po L x 4 po l, dents carées de 1/4 po
Format 1/4x1/4x1/4"
N° d'article 0271234
N° de modèle 07413
★★★★★ ★★★★★
0
(0)
RICHARD
Éponge
N° d'article 0271499
N° de modèle 05036
★★★★★ ★★★★★
5
(1)
RICHARD
Croisillons de carrelage en plastique Richard, blancs, 1/16 po, paquet de 200
Format 1/16"XPK/200
N° d'article 0271251
N° de modèle 102340
★★★★★ ★★★★★
5
(1)
RICHARD
Grattoir pour couvre-plancher robuste Richard, argent et noir, lame en acier dur 4 po l., manche en mousse 12 po L.
Format 12"
N° d'article 0271042
N° de modèle 13312
★★★★★ ★★★★★
5
(1)
RUBI
Scie à eau portative, 7"
Format 120V-7"
N° d'article 84665653
N° de modèle RU-24977
★★★★★ ★★★★★
1
(2)
RICHARD
Gants antidérapants Richard, réduisent la fatigue des mains, noirs, 13 po
Format 13"
N° d'article 0271396
N° de modèle 05300
★★★★★ ★★★★★
0
(0)
RICHARD
Applicateur de scellant à coulis à brosse Richard, transparent, remplissable, 6 onces
N° d'article 0271498
N° de modèle 05050
★★★★★ ★★★★★
4
(2)
RICHARD
Truelle carrée légère Richard, acier trempé, manche en bois franc, 2 po de large x 6 po de long
Format 5.08x15.24CM
N° d'article 0271392
N° de modèle 18984
★★★★★ ★★★★★
0
(0)
RICHARD
Sac applicateur de coulis Richard, vinyle, buse en métal, réutilisable
N° d'article 0271366
N° de modèle 35850
★★★★★ ★★★★★
1
(1)
RICHARD
Ventouse à poignée Richard, pour vitres et carreaux lourds, verte, capacité de 66 lb
N° d'article 0271446
N° de modèle 5497
★★★★★ ★★★★★
1
(2)
RICHARD
Spatule crénelée Richard, dents carrées de 1/4 po, en acier, 9 po de large
Format 1/4x1/4x1/4"
N° d'article 0271182
N° de modèle CS-9#13
★★★★★ ★★★★★
0
(0)
RICHARD
Spatule crénelée à dents carrées Richard, jaune, 3 po de large, dents de 1/4 po
Format 3"X1/4"DT
N° d'article 0271283
N° de modèle 60013
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Arbre de scie-cloche Craftsman, 3/8 po dia, pointe en croix, tige hexagonale, acier carbone est évalué 4.1 de 5 de 19.
Rated 4 de 5 de par Takes a bit to figure out how to use, but useful [This review was collected as part of a promotion.] This CRAFTSMAN tool is part of a multi-part tool set of hole saws. To use you need both an arbor, and the hole saw of the size or sizes needed. When I first opened the package for the arbor, there is no instruction on how to use. A small diagram or description would be helpful. After looking it over for a time, I figured out the "Quick Change" design. No tools are needed, and don't be tempted to unscrew any part!! To attach the arbor to the hole saw, grasp the knurled wheel, and pull it toward the back of the shaft (where it connects to the drill/driver). It should slide back fairly easily. The attach the hole saw on the threaded portion of the shaft near the drill bit end. You will then align the appropriate holes in the hole saw with the pins extending from the knurled wheel, and push the pins into the hole saw alignment holes. Once connected together, the pieces work as a standard hole saw.
Date de publication: 2018-10-10
Rated 1 de 5 de par Not the quality I'd expect from a Craftsman tool [This review was collected as part of a promotion.] The locking mechanism slides back and forth and locks into place by pushing a spring loaded ballbearing into a grove on the arbor shaft; sort of how a socket wrench locks onto a socket. Unless you have a hole saw attached to the arbor, there's nothing preventing that locking mechanism from being pulled too far forward. Nor is there anything holding that ballbearing in place. I accidentally pulled the locking mechanism off the arbor shaft and the ballbearing shot across the room and the spring bounced to the floor. The tool worked great for one use, but now the spring and ballbearing are lost and the arbor is rendered useless. I bought the Craftsman Quick Change Arbor because it looked like it was made better that the Lenox. What a disappointment.
Date de publication: 2019-07-11
Rated 4 de 5 de par Craftsman quick change hole saw arbor There are no instructions for the first-time user, so: Craftsman makes three or four different types of these arbors, and they make sizes other than 3/8, so eyeball them carefully and check your saw blade to ensure that the one you pick will actually engage your blade properly. (There is a special arbor for hole saws under about an inch and a quarter.) To use, grasp the wide ring or flange between thumb and forefinger and move it toward the butt of the arbor. It will slide up the arbor about a half inch, allowing free access to the threads on the arbor shaft below it. While holding the flange up out of the way, screw the blade onto the threads until it stops (do not force or tighten it!!). Then allow (or guide) the flange back down toward the top of the blade. You will now notice that the two lugs sticking out of the bottom of the flange will drop into two (of the four) holes in the top of the blade. You might have to back the blade down the threads just a bit to line the holes up with those lugs, which is why you didn't tighten the blade on the threads. Engage the lugs in the holes and you're good to go. (The first time using the arbor, you might have to tap the lugs into place with a rubber mallet, and tap them out again with a nail-set from within the blade when you first take the blade off. After that, they should slide in and out of blades easily.) Before you buy, make sure the holes in your blade match the lugs on the arbor!!
Date de publication: 2020-11-16
Rated 1 de 5 de par Not a robust design There are no instructions, and it is not intuitive how to use it properly to avoid losing pieces. The locking mechanism slides back and forth and locks into place by pushing a spring loaded ball bearing into a grove on the arbor shaft. Unless you have a hole saw attached to the arbor, there's nothing preventing that locking mechanism from being pulled too far forward which allows the spring and ball bearing to come out and get lost. Very frustrating!!
Date de publication: 2022-11-17
Rated 2 de 5 de par Poor condition [This review was collected as part of a promotion.] Used it once and needed to take it back. Was worn out
Date de publication: 2019-07-31
Rated 1 de 5 de par Do not buy It does not have any instruction on package. I tried to put it on the craftsman hole saw. Once I loosened one of lock screw, everything falls apart.
Date de publication: 2020-05-16
Rated 5 de 5 de par Best you can buy [This review was collected as part of a promotion.] This is the second one I’ve bought. The last one I got was 6 years ago. That’s how long it lasted. And only had to replace because I left it out side. Absolutely the best you can buy!
Date de publication: 2019-08-15
Rated 5 de 5 de par Did it’s job... [This review was collected as part of a promotion.] I used this along with the bi-metal 2” hole saw to bore some 2” holes in plastic speaker pods on a Harley Touring bike. Worked beautifully cutting a precise hole.
Date de publication: 2019-07-14
  • y_2023, m_3, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_fr_CA, sid_00276995, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin