Marteau agrafeur professionnel T50

N° d'article 0012004 N° de modèle HT50-10
Marteau agrafeur professionnel T50
 

Caractéristiques

Marteau agrafeur robuste. Utilise 4 grandeurs d'agrafes de modèle T-50 : 1/4 po, 5/16 po, 3 /8 po et 1/2 po. Capacité de 2 bandelettes.

  • Parfait pour suspendre l'isolation, réparer les clôtures et installer les matériaux de toiture
  • Pistolet-agrafeur à percussion manuel à usage intensif, idéal pour les toitures, l'isolation, l'enveloppe de bâtiment et les revêtements de sol
  • Utilise des agrafes de 1/2 pouce
  • Poignée spécialement conçue pour le confort de l'utilisateur
  • Mécanismes anti-bourrage pour des performances fiables
  • Le bord de frappe rétractable évite les dommages
  • Peut contenir 2 bandes complètes d'agrafes T50 pour un plus grand nombre de tirs entre les chargements
  • Utilise les agrafes Arrow T50 de calibre 16 en longueurs de 5/16, 3/8 et 1/2 pouces
  • Pièces de travail en acier trempé au carbone pour une durabilité accrue

Spécifications techniques

Garantie :Limitée à vie Type :Pistolet-agrafeur à percussion Type d'agrafeuse à tapis :Manuel Robuste/résistant :Oui Dimensions de l'agrafe (cm) :0,9525 Dimensions de l'agrafe (po) :0.375 Dimensions de l'agrafe (mm) :9,5

Vous pourriez aussi aimer

ARROW
Pistolet agrafeur robuste Arrow T-50
N° d'article 0012002
N° de modèle T50
★★★★★ ★★★★★
4,7
(7461)
ARROW
Agrafes 3/8 po
Format 3/8"x5000BT
N° d'article 0012114
N° de modèle 506 IP
★★★★★ ★★★★★
4,9
(30)
RAMSET
Cartouches
Format CAL.22xBT/100
N° d'article 2293125
N° de modèle C42CW
★★★★★ ★★★★★
5
(1)
BOSTITCH
Marteau agrafeur Bostitch, 1/4 po à 3/8 po
N° d'article 00277419
N° de modèle BHT150C
★★★★★ ★★★★★
0
(0)
RAMSET
OUTIL À DÉTENTE
Format 0.22CA
N° d'article 22935182
N° de modèle 45100
★★★★★ ★★★★★
0
(0)
ARROW
Agrafes Arrow 3/8 po pour agrafeuse T50
Format 3/8"xPK1250
N° d'article 0012029
N° de modèle 50624
★★★★★ ★★★★★
5
(1)
ARROW
Agrafes T50 de 1/2 po Arrow, acier, paquet de 5 000
Format 1/2"xBT5000
N° d'article 00125090
N° de modèle 508IP
★★★★★ ★★★★★
4
(1)
ARROW
Agrafes Arrow T50 1/2 à toute épreuve quantité de 1250
Format 1/2"XPK/1250
N° d'article 0012030
N° de modèle 50824
★★★★★ ★★★★★
4,8
(5)
CRAFTSMAN
Agrafeuse en acier pour applications légères par CRAFTSMAN
N° d'article 00277426
N° de modèle CMHT82644
★★★★★ ★★★★★
1
(2)
ARROW
Agrafes Arrow T50 5/16 à toute épreuve quantité de 5000
Format 5/16"xBT5000
N° d'article 0012113
N° de modèle 505IP
★★★★★ ★★★★★
0
(0)
BOSTITCH
Agrafeuse-cloueuse électrique 2-en-1 par Bostitch, cordon de 8 po
N° d'article 00277427
N° de modèle BTE550Z
★★★★★ ★★★★★
1
(1)
ARROW
Agrafeuse légère JT21
N° d'article 00125083
N° de modèle JT21CM
★★★★★ ★★★★★
4,8
(3331)
CRAFTSMAN
Agrafeuse à pression inversée pour applications légères Pushfire par CRAFTSMAN
N° d'article 00277425
N° de modèle CMHT82642
★★★★★ ★★★★★
0
(0)
RAMSET
Goujons d'ancrage
Format 2 1/2"xBT/100
N° d'article 2293148
N° de modèle 1516
★★★★★ ★★★★★
0
(0)
BOSTITCH
Agrafeuse 4-en-1 Bostitch, jaune
N° d'article 00277424
N° de modèle BTHT80277
★★★★★ ★★★★★
0
(0)
BOSTITCH
Agrafeuse robuste Bostitch
N° d'article 00277418
N° de modèle BT110
★★★★★ ★★★★★
0
(0)
BOSTITCH
Agrafeuse-cloueuse manuelle pour applications lourdes par Bostitch
N° d'article 00277433
N° de modèle BT160HL
★★★★★ ★★★★★
0
(0)
RAMSET
OUTIL À MARTEAU
Format 0.22CA
N° d'article 22935181
N° de modèle 45000
★★★★★ ★★★★★
4,8
(4)
RAMSET
Cartouches
Format CAL.22xBT/100
N° d'article 2293129
N° de modèle C32CW
★★★★★ ★★★★★
5
(1)
RAMSET
GOUJONS D'ANCRAGE
Format 3"xBT/100
N° d'article 2293149
N° de modèle 1524
★★★★★ ★★★★★
0
(0)
STANLEY
Marteau agrafeur manuel Anti-Vibe par Bostitch
N° d'article 00277432
N° de modèle BTHTHT550
★★★★★ ★★★★★
0
(0)
ARROW
Agrafes Arrow T50 3/8 à toute épreuve quantité de 1000
Format 3/8"xPK/1000
N° d'article 0012165
N° de modèle 506SS1
★★★★★ ★★★★★
0
(0)
RAMSET
Goujons d'ancrage
Format 2 1/2"xBT/100
N° d'article 2293154
N° de modèle 1516SDC
★★★★★ ★★★★★
0
(0)
ARROW
Bâtons de colle tout usage, 10 po, transparent, 12/pqt
Format 10"XBT/12
N° d'article 0012055
N° de modèle AP10
★★★★★ ★★★★★
5
(1)

Does it come with the staplers?

Posée par: Karen1234566
Hello, This hammer tacker uses Arrow T50 staples in 5/16", 3/8" and 1/2" leg lengths. Staples are not included with the tool. Hope this helps. -- Your Arrow Fastener Team
Répondue par: Arrow Product Expert
Date de publication: 2020-07-29
  • y_2024, m_5, d_17, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_0012004, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 4ms
  • QUESTIONS, PRODUCT
Marteau agrafeur professionnel T50 est évalué 4.7 de 5 de 1237.
Rated 5 de 5 de par Expectation exceeded [This review was collected as part of a promotion.] I purchased the HT50 hammer tracker to install R15 batt insulation and some vapor barrier on our new extension , it met my expectations and then some. Very easy to zip right along the stapling flange. We also had to re-roof our garden shed. After removing a previously poorly installed shingles it was time to lay down 15# felt paper. It took some practice not to smack my knuckles on the roof surface but after about a dozen swings and tilting to staple hammer I was able to save my knuckles and not tear the tar paper with nose of the hammer. Thank you Arrow for making these jobs easier.
Date de publication: 2023-03-28
Rated 5 de 5 de par I use this product for everything [This review was collected as part of a promotion.] The only down side from this product is that it only holds 1.5 clips of Staples and some models hold 2 full clips.the main reason I choose it is because the "head" is bigger allowing it to hang in a hammer loop on my tool belt while other.."nicer" more expensive models are thin and fall right thru.the staple capacity is an issue tho.in the mill I use this and it doesn't matter because I put the half clip on the work bench.but in the field I have to keep the half clips separate which is a pain in the but.i still love it tho.i have FOUR of them in my Jeep right now. Great product
Date de publication: 2018-09-16
Rated 5 de 5 de par Excellent Hammer Tacker [This review was collected as part of a promotion.] This Hammer tacker (the HT50), is one of the best ones I've seen or used. My dad has used his for years, and multiple coworkers in construction use it. About 2-3 weeks ago I bought my first hammer tacker. For something compact that I can stick in my back pocket, I chose the HT55 slim hammer tacker, but alas, after only about 2.5 weeks of occasional moderate use, the hinge-pin sheared off and the entire staple carriage fell out. Thankfully, I was able to bring it back to Home depot and get it replaced with the HT50. Super excited for my new purchase! (Promo code 1117)
Date de publication: 2018-10-11
Rated 3 de 5 de par must not be to important i gave my honest oppinion about product, hopeing for a response on how to fix the problem of mine breaking. i put negative & possitive in my review. now you say you cant put my reveiw in because it didnt follow guidelines. ok fine but thats all you said back. im thinking if a customer was important like you say then you would try to resolve my issues with hammer tacker "slap stapler". again the mechanical part on the front that sends the staple out always breaks on mine. a new one or part to fix would be great! but it seems due to me putting the problem in my review, you just threw my problem to the wayside.
Date de publication: 2014-02-27
Rated 4 de 5 de par Another great arrow product [This review was collected as part of a promotion.] I have 2 hand staplers from arrow, haven't gone wrong with those. Needed a hammer tacker to make some if my work easier, I haul wood products on a flatbed. I could have bought the cheap no name products, but their reviews complained about jams. I've had very few jams with my other arrow products, so I figured for the price I couldn't go wrong. Haven't used this much yet but no jams so far. Easy load, good staple capacity. Little heavy but not bad(and no heavier than its competitors). I like this slightly shorter handle size, better for what I'm doing
Date de publication: 2018-05-27
Rated 5 de 5 de par Always the best! [This review was collected as part of a promotion.] This tool is always ready to go and able to do the tough work. This tool is tough to the point I had dropped my first one off a roof up three stories and the only issue it had was a couple dings in the outer body. That had to work for a few years after dropping it and made it easier for the big rig to destroy it after my son dropped in the parking lot where we were working and didn't realize what happened. When turned around the 18 wheeler hit it with the tires on side and finished it. Wasn't planning on replacing it but immediately went out and got another one. This is just as good as the old one! I have always been happy with my hammer tack.
Date de publication: 2018-10-05
Rated 5 de 5 de par HT-50 [This review was collected as part of a promotion.] I am a general contractor with moor e than 30 years experience. My background is carpentry and we have used the HT-50 for insulation, PVC flashing and installing house wrap when we frame houses, additions or garages. Easy to use, load and use again..great balanced tool which is important when using it all day long. Arrow products certainly is quality product and the cost is very reasonable for a professional product. I can't afford to but lesser quality tools as I make my living with high quality products...such as Arrow HT-50
Date de publication: 2018-07-19
Rated 2 de 5 de par product is good when it works I mostly use the hammer tacker for insulation and housewrap. this product works good for the first 9 months and then starts to jam frequently and after a while longer 2-3 staples fall out of it and jams all the time. I only use genuine arrow t- 50 staples(5/16) with the hammer tacker. It would be a great tool if they would last longer.
Date de publication: 2014-09-27
  • y_2024, m_5, d_17, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1237
  • loc_fr_CA, sid_0012004, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 7ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin