Banc de scie avec support à roulettes Dewalt, 10", 15 A

Article#00275708 Modèle#DWE7491RS Format10"x15A
Banc de scie avec support à roulettes Dewalt, 10", 15 A
 

Caractéristiques

Le banc de scie Dewalt DWE7491RS est équipé d'un moteur de 15 ampères qui coupe facilement et rapidement les bois durs. La capacité de refente de 32 po permet de couper facilement divers matériaux tels que des tablettes et des moulures. Le réglage du guide à crémaillère latéral télescopique permet un ajustement rapide, régulier et précis. Le support à roulette est conçu pour une installation stable et un démontage facile sur le chantier. Ce banc de scie est muni d'un conduit d'évacuation de la poussière auquel on peut brancher un tuyau d'aspirateur de 2 1/2 po afin de minimiser le temps de nettoyage après les travaux.

Vous pourriez aussi aimer

BOSCH
Banc de scie portatif, 10", 15 A
Format 10"x15AM
Article #19835506
Modèle #GTS1031
★★★★★ ★★★★★
3,2
(13)
BOSCH
Scie à table de chantier avec pied à roulettes, 10"
Format 10"x15AM
Article #19836270
Modèle #4100-10
★★★★★ ★★★★★
4,8
(48)
MAKITA
Banc de scie avec support 10 po
Format 10"x15AM
Article #11975246
Modèle #2705X1
★★★★★ ★★★★★
0
(0)
BOSCH
Support pour banc de scie
Article #330009252
Modèle #TS2100
★★★★★ ★★★★★
5
(1)
METABO HPT
Banc de scie avec support à roulettes, 10'', 15 AM
Format 10"x15A
Article #37815184
Modèle #C10RJM
★★★★★ ★★★★★
4,1
(81)
BOSCH
Plaque d'insertion à absence de jeu pour scie à table
Article #330009250
Modèle #TS1006
★★★★★ ★★★★★
0
(0)
BOSCH
Cartouche à double activation pour scie à table
Article #330009251
Modèle #TS1020
★★★★★ ★★★★★
0
(0)
BOSCH
Support gauche pour scie à table
Article #330009253
Modèle #TS1008
★★★★★ ★★★★★
4,3
(3)
BOSCH
Ensemble pour support de sortie
Article #330009254
Modèle #TS1016
★★★★★ ★★★★★
4,7
(3)
METABO HPT
Banc de scie sans fil, Metabo HPT 36 V/CC, 10''
Format 10"x36V
Article #37815211
Modèle #C3610DRJQ4M
★★★★★ ★★★★★
4,8
(5)
DEWALT
Banc de scie compact, 10 po, 15 A
Format 10"x15A
Article #0027593
Modèle #DW745
★★★★★ ★★★★★
4,7
(91)
DEWALT
Banc de scie compact, Dewalt 10'', 15 A
Format 10"x15A
Article #00275707
Modèle #DWE7480
★★★★★ ★★★★★
4,7
(458)
DEWALT
Scie à céramique, 10", 15 A
Format 10" 15AM
Article #00275767
Modèle #D24000S
★★★★★ ★★★★★
4,9
(21)
TRITON TOOLS
Ensemble de rails et connecteurs Triton, 27,5", 2 mcx
Article #330668648
Modèle #TTSTP
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Support Multifonction Triton, 31,5" x 37", orange
Article #330668645
Modèle #MSA200
★★★★★ ★★★★★
0
(0)
DEWALT
Banc de scie Dewalt compact pour chantier, 8 1/4 po
Format 8 1/4"
Article #00277225
Modèle #DWE7485
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Guide de coupe parallèle Triton
Article #330668653
Modèle #TTSPG
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Guide 90° Triton, blanc
Article #330668649
Modèle #TTSTS
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Ensemble de transport robuste Triton
Article #330668634
Modèle #TWX7RTK
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Sac de transport pour scie TTS1400
Article #330668654
Modèle #TTSSB
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Banc de scie Craftsman avec support, lame de 10", 4,4 HP
Format 10"x4.4HP
Article #89335010
Modèle #9 41502
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Rail de guidage pour scie plongeante Triton TTS1400, 59"
Article #330668655
Modèle #TTST1500
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Sac de dépoussiérage Triton, 1000 ml
Article #330668652
Modèle #TTSDES
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Module de scie contracteur Triton, 26" x 16,5", orange/noir
Article #330668640
Modèle #TWX7CS001
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Sac de transport pour rail de 700 mm, 27,5", noir
Article #330668658
Modèle #TTSCB700
★★★★★ ★★★★★
0
(0)

Spécifications techniques

Tours par minute :4800 Profondeur de coupe :3 1/8" (90°) - 2 1/4" (45°) Inclus :Lame au carbure de 10" à 24 dents, support à roulettes, bâton-poussoir, guide à onglet, guide à refente, 2 clés d'ajustement Diamètre de l'arbre :5/8" Ampérage :15 A Capacité de refente :32 1/2" (droite) - 22" (gauche) Garantie :Garantie limitée de 3 ans, contrat de service gratuit d'un an, garantie de remboursement de 30 jours Dimensions de la lame :10"

how do I change the bevel angle on a DWE 7491 table saw

Posée par: rayaman
If you look at the front of the saw, theres a lever handle right below the "wheel" that adjusts the heigh of the blade up and down. If you pull that handle to the right, you can then slide it to whichever degree you would like. I hope this makes sense what I am saying. Good luck!
Répondue par: TPerry
Date de publication: 2019-07-04

Can I buy the stand separately?

Posée par: Smoffett
Dewalt does make a rolling saw stand,Dw7440rs. This can be purchased by itself, and looks to be almost identical to the one that comes with the 7491rs table saw
Répondue par: P and B
Date de publication: 2018-07-11

I the dwalt portable jobsite table saw good for making perfect cuts to make cabinet doors with the correct blade.

Posée par: Rigor

What is the rip capacity?

Posée par: mark sk
  • y_2020, m_4, d_3, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_fr_CA, sid_00275708, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Banc de scie avec support à roulettes Dewalt, 10", 15 A est évalué 4.6 de 5 de 460.
Rated 5 de 5 de par Don't waste money on anything else I did a lot of research and looked at many models before finally buying this saw. I spent more than I had planned but am very glad I did. I looked at the ridgid, delta, kobalt, porter cable, rockwell, masterforce, Performax and craftsman portable table saws while shopping around and all of them had poor fences, and some were useless. What's the point of a table saw if the fence doesnt consistently lock down straight. Dewalts rack and pinion system far surpasses any other manufacturers fence system.Also many of the other mentioned brands use plastic gears for the blade height adjustments. To top it off dewalt has has the largest rip capacity.
Date de publication: 2016-06-10
Rated 5 de 5 de par Awesome purchase for a DIYer!!! Used this to build my kids clubhouse in our basement. Right out of the box this is a quality piece. Simple to set up and light enough to carry around. Used a different blade than what came with it so can't vouch for its abilities, but the job site table saw itself performed flawlessly! Hooked it up to my "shop vacuum" and it did great using it indoors. Not real loud, used it in the basement with my toddler sleeping upstairs without waking him. Would highly recommend. My only complaint is the flimsy piece for pushing angles through the saw. It's the only piece that is not that accurate(too much play). Everything has exceeded my expectations!!
Date de publication: 2015-01-03
Rated 4 de 5 de par dewalt table saw I haven't put this through the full test yet, only made some test cuts to check blade alignment (all was good right out of the box). it does seem to be a very good quality saw. I really like the rack & pinion fence adjustment and the dust port. the adjustments for blade height and angle work very smoothly, and the angle adjustment locks in place very firmly. a few people complained about the miter slot being loose, but mine seems to be very snug. at least it's a standard size, so I will be able to upgrade whenever I feel the need to. I plan to put it through it's paces this weekend, and maybe I can do a better review later.
Date de publication: 2014-05-16
Rated 5 de 5 de par First time using a table saw So my son asked me to help him install a luxury vinyl plank floor in two rooms. I have never done one, am not a carpenter, and have never used a table saw. I shopped table saws and watched YouTube videos, and was impressed with the Dewalt saw. The fence was easy to adjust and remove, and the rack and pinion adjustment was easy to change. The saw was light enough for me to move alone. I ran the saw for two days while the rest of the family placed the flooring, and had no problems. I also used the miter attachment for the quarter round cuts. A really first rate tool! [This review was collected as part of a promotion.]
Date de publication: 2019-01-15
Rated 5 de 5 de par Awesome table saw! I was looking for an upgrade to my very old Skill table saw. I was reviewing different table saws for my budget of up to $300. What sold me on this table saw was the Rack and Pinion system for the fence. Basically it moves the fence left or right always parallel to the blade. If the rail is free of debris, it allows you to setup your fence up to 1/32 of an inch (a little blow of air does the trick). So far this table saw is the best for me! I’m doing a lot of projects with this saw including the dog bed on the picture attached; this table saw is super powerful, a workhorse! [This review was collected as part of a promotion.]
Date de publication: 2019-04-21
Rated 5 de 5 de par Simply: THE BEST I bought this table saw last summer and it is not just the best job-site table saw I have ever used....it is the best, most well thought out tool of any kind that I have ever owned. It is astonishing to me that other brands have not copied this fence design. It is SOOOOO easy and sooooo accurate. I have had cheaper table saws, and I have seen more expensive saws (such as the Bosch model within the same price range (about $100 more, actually). But how it is that this type of fence is not an industry standard is baffling to me. I have, within the past year switched over to all DEWALT power tools. [This review was collected as part of a promotion.]
Date de publication: 2019-06-27
Rated 4 de 5 de par One thing missing - I have been using this saw fro a few months now. I love it. Fence is always dead on accurate and so fast to set up its amazing how well thought out everything is. JUST ONE THING MISSING. Electronic power switching keeps you from plugging in a saw that already has the power on. This means you can not lock it in the on position to power it from a power strip that also powers the dust collection. I use a shop vac that just sits under the saw but its a bit annoying to have to feel around for the switch on the vac. I like the electronic power switch, its a no-brainer safety thing, but why not include an aux plug that is powered by the same switch so my vac starts when I power the saw.
Date de publication: 2017-12-21
Rated 5 de 5 de par Easy Setup, great saw I bought this after reviewing several table saws. Working alone I had it assembled in under an hour, and it was almost perfectly set up right out of the box. I had to make one extremely small tweak in the fence alignment and another in the splitter. The latter was a little bit confusing as the instructions and photos were not perfectly clear, but once I started adjusting I could see what to do. First crosscuts were right on the money and the first test rip was perfect. The rip fence scale is right on the money. I am very happy that I made this choice. The miter gauge seemed to be the one weak link, but even that proved to be accurate when I used it.
Date de publication: 2018-11-03
  • y_2020, m_4, d_3, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_460
  • loc_fr_CA, sid_00275708, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Produits fréquemment achetés ensemble

DEWALT
Lames de scie au carbure 10" Pqt/3
Format 10"x32-60DTxPK3
Article #00275578
Modèle #DW3106P5B3C
★★★★★ ★★★★★
4,5
(15)

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin