Base 3 en 1 de Dremel, perceuse à colonne articulée, porte-outils, support à lames, acier

N° d'article 1916265 N° de modèle 220-01
Base 3 en 1 de Dremel, perceuse à colonne articulée, porte-outils, support à lames, acier
 

Caractéristiques

Ce support à outils rotatifs de Dremel est doté d'une multitude de fonctions pratiques. Il peut servir à supporter une perceuse, un outil autre ou un arbre. Sa base métallique dotée de quatre points de serrage offre une excellente stabilité. Obtenez des mesures précises en utilisant les repères en pouces et métriques de ce support. Rangez les clés, les forets et autres accessoires grâce à son compartiment de rangement pratique situé dans le haut.

  • Base métallique robuste avec 4 points de serrage pour maintenir fermement la pièce à travailler
  • Marques de profondeur avec butée pour un réglage constant de la profondeur
  • Marquage en pouces et métriques sur la base pour un perçage précis de la pièce à usiner
  • Perceuse à colonne articulée - perce des trous perpendiculaires et angulaires par incréments de 15 degrés, jusqu'à 90 degrés à l'horizontale
  • Porte-outil qui maintient l'outil à 90 degrés à l'horizontale pour des tâches telles que le polissage d'objets métalliques, le ponçage de différentes formes et le meulage de pièces
  • Porte-outils à tige flexible qui permet un réglage télescopique entre 16 et 29 pouces de haut
  • Espace qui permet de ranger les forets, les clés et autres accessoires Dremel
  • Clips de gestion des cordons pour un rangement sûr des cordons d'alimentation

Spécifications techniques

Garantie :Limitée de 1 an Type :Poste de travail pour perceuse à colonne Garantie de base sur la main-d'oeuvre (mois) :0 Garantie de base sur les pièces (mois) :0 Marques/modèles compatibles :Dremel Mise en garde concernant le produit :Image à titre de référence seulement

Vous pourriez aussi aimer

DEWALT
Ensemble de 5 lames pour outils oscillants
Format 5MX
N° d'article 00275949
N° de modèle DWA4216
★★★★★ ★★★★★
1
(1)
EXCHANGE-A-BLADE
Lames de coupe à ras pour outil oscillant Construction Pro EAB, 1 3/8 po l., acier dur, dents japonaises, 5 lames
Format 1 3/8"x5MX
N° d'article 34595997
N° de modèle 1071582
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Lames de coupe à ras EAB Universal, acier dur, paquet de 5, 1 3/8 po l.
Format 1 3/8"x5MX
N° d'article 34595996
N° de modèle 1071572
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Outil multifonctionnel pour coupe à ras EAB, bimétal recyclable, 1 3/8 po l., paquet de 5
Format 1 3/8"x5MX
N° d'article 34595998
N° de modèle 1071592
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Lames de coupe à ras pour outil oscillant EAB, 1 1/4 po l., coupe de 1 1/2 po p., acier haut carbone, 5 par paquet
Format 1 1/4"xPK5
N° d'article 34595725
N° de modèle 1070222
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Lames de coupe à ras EAB Universal, bimétal, 5 par paquet, 1 1/4 po l.
Format 1 1/4"xPK5
N° d'article 34595736
N° de modèle 1070232
★★★★★ ★★★★★
1
(1)
PROJECT SOURCE
Ensemble 10 pièces d'accessoires pour outil oscillants Project Source
Format 10MX
N° d'article 19225267
N° de modèle 66704
★★★★★ ★★★★★
5
(1)
EXCHANGE-A-BLADE
Outils à lames oscillantes EAB Professional, coupe affleurante, acier, ensemble de 4
Format 1 1/4"x2 3/4"xPK4
N° d'article 09065021
N° de modèle 1070212
★★★★★ ★★★★★
0
(0)
KREG
Gabarit universel de découpe 24 po pour scie circulaire Rip-Cut de Kreg
N° d'article 65845007
N° de modèle KMA2685
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Lames de coupe à ras rapide professionnelles EAB, 2 3/4 po l., profondeur de coupe 1 1/4 po, acier carbone, paquet de 3
Format 2 3/4"x3/PK
N° d'article 34595951
N° de modèle 1070492
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Lame oscillante Craftsman conique en acier carbone 3/pqt
Format 3/PK
N° d'article 00277837
N° de modèle CMAO202
★★★★★ ★★★★★
0
(0)
ROTOZIP
Forets pour découpes contrôlées RotoZip, acier, 8 par paquet, 1/8 po dia
Format 8/ENS
N° d'article 19165060
N° de modèle GP8
★★★★★ ★★★★★
0
(0)
BOSCH
Lames plongeantes oscillantes Bosch Starlock, bimétal, paquet de 3, 1 1/4 po l.
Format 1 1/4"xPK3
N° d'article 19835961
N° de modèle OSL114F-3
★★★★★ ★★★★★
0
(0)
DREMEL
Lame oscillante Dremel Multi-Max pour l'enlèvement du coulis, carbure, 1 par paquet, 2 3/4 po L.
Format 1/16"
N° d'article 1916311
N° de modèle MM501
★★★★★ ★★★★★
5
(1)
DEWALT
Lame oscillante DEWALT usage général nitrure de titane 1 1/4 po 3/pqt
Format 3/PK-1.1/4"
N° d'article 00277859
N° de modèle DWA4254-3
★★★★★ ★★★★★
0
(0)
DREMEL
Ensemble de lames Multi-Max Quick Fit universelles de Dremel de coupe bois et cloison sèche 3 pièces
Format 3MX
N° d'article 19836604
N° de modèle MM492
★★★★★ ★★★★★
5
(1)
DEWALT
Lame oscillante DEWALT XR en acier carbone 3/pqt
Format 3/PK
N° d'article 00277844
N° de modèle DWAXR4272-3
★★★★★ ★★★★★
0
(0)
DREMEL
Lame pour outil oscillant en carbure Dremel, 1 1/4 po l., adaptation rapide universelle, coupe à ras
Format 1 1/4"
N° d'article 19165117
N° de modèle MM485
★★★★★ ★★★★★
4,2
(18)
BOSCH
Ensemble d'outils multifonctions oscillants Starlock de Bosch lames assorties usage général coffret inclus 5 pièces
Format 5MX
N° d'article 19836601
N° de modèle OSL005L
★★★★★ ★★★★★
0
(0)
DEWALT
DEWALT lame oscillante en métal titane
N° d'article 00276162
N° de modèle DWA4209
★★★★★ ★★★★★
1
(1)
EXCHANGE-A-BLADE
Lame segmentée professionnelle pour enlever le coulis pour outil oscillant EAB, 2 1/2 po, profondeur de coupe de 1/8 po
Format 3x3.5"
N° d'article 34595729
N° de modèle 1070102
★★★★★ ★★★★★
0
(0)
DEWALT
DEWALT Lame oscillante large en titane pour le bois avec clous (DWA4204)
N° d'article 00276158
N° de modèle DWA4204
★★★★★ ★★★★★
0
(0)
ROTOZIP
Mèches pour cloisons sèches RotoZip, 1/8 po, acier rapide, paquet de 16
Format 1/8" 16/PK
N° d'article 19165075
N° de modèle GP16
★★★★★ ★★★★★
0
(0)
BOSCH
Lames d'accessoires pour outils multiples oscillants Bosch Starlock, noires, ensemble de 3, 1 1/4 po l.
Format 3MX
N° d'article 19835955
N° de modèle OSL003VP
★★★★★ ★★★★★
0
(0)
DREMEL
Ensemble d'accessoires rotatifs de découpe EZ Lock Dremel 11 pièces
Format 11MX
N° d'article 19836611
N° de modèle EZ728-01
★★★★★ ★★★★★
4,9
(20)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Base 3 en 1 de Dremel, perceuse à colonne articulée, porte-outils, support à lames, acier est évalué 4.6 de 5 de 199.
Rated 4 de 5 de par Works as advertised, at least for now... I can't really complain about the cheap feeling fabrication of the product, after all it was cheap. I've had no problems so far using it as a drill press, a hanger for the flex shaft, or as a hat rack. I don't see it lasting a long time though, as another reviewer put it: "too much plastic". The nut that holds the tool itself in place is way too soft a polymer to last, and the depth gauge feels like it might break if I look at it too hard. All in all though, it works well. The base is heavy enough for light duty without bolting it down and so long as everything is tightened well it stays true. If the two crucial pieces I mentioned were made of stouter stuff, I'd have given it 5 stars.
Date de publication: 2014-12-18
Rated 3 de 5 de par Not so good with 4200 I have been a huge fan of Dremel, but I really have mixed feelings about the Workstation 220. It is specified that it can be used with a Rotary tool 4200. The cutouts for controls in the holding cup are not diametrically opposite (they are 90 deg apart) and hence once the tool is in position, I can only access one side of the quick change, thus making it useless. Of course I can cut out an access hole but I do not expect to make these kind of modifications when it can be helped. My rating is based on it use with Dremel 4200. If I was using a tool with a regular collet, I would had rated it higher.
Date de publication: 2015-02-22
Rated 5 de 5 de par Work Station Works Wonders I bought a work station a couple of months ago and have been quite pleased with it. This handy item has helped complete many of my projects. It was a reasonable price and it works great. I do have a couple of questions. On the crows nest there are two slots, one opposite the other. In your picture of the work station I see what appears to be some kind of holder with some drill bits in it that fits in the larger of the 2 slots. That particular item was not included with my work station so how so I acquire one? And what is the smaller slot for?
Date de publication: 2015-05-27
Rated 4 de 5 de par Of good value, for the price I'd prefer a more beefy tool, but NO WAY you can beat this for the price. The wing head screw that secures the final down stop is too short and difficult to adjust, but that's fixable with a longer screw from the hardware store. Also, the tube that holds the cord holder won't stay up, but a few light peen marks on the back of the tube will fix that, and make it adjustable. If this one wears out, I'll definitely buy another one. Also, I needed a part for mine, and can't say enough about how well Pat and the guys in Dremel Service responded!!!
Date de publication: 2014-12-24
Rated 5 de 5 de par Really Handy at my Watchmakers Bench What a great device. If set up and secured properly It does a great job in drilling sanding and most of all for me grinding, polishing and buffing parts for clocks and watches. You don't always want to use a normal flex shaft system, and my larger buff/grinding wheel is too big. Due to eye issues I have a very hard time drilling strait wit a flex shaft hand piece. There are accessories to turn a fles motor into a drill press, stationary grinder but they are VERY expensive. For the price this is a FANTASTIC product. I've had it about 3 months and I use it every day. I've even had a couple of watch/clockmaker/bench jeweler friends come over to my shop to check it out and they ran right out and bought their own!!!
Date de publication: 2015-01-01
Rated 5 de 5 de par excellent multi use tool that is well built [This review was collected as part of a promotion.] excellent multi use tool that is well built. i have had this many years, it was given to me as a gift. at first i wasn't certain on how or even if I could use it. now it is in regular use to insure smooth, straight even drill points. I can't remember the time when I didn't have it on how I was able to get even, consistent holes. AND without breaking as many of those mini size drill bits. Drilling straight down with the tool it keeps me from bending and breaking those size 50, 60, even #70 size bits. I need to get the bit holder for the top as that is all I need to add to make mine perfect!
Date de publication: 2021-02-01
Rated 2 de 5 de par So disappointed in the lack of a grip I bought this to make my life easier, and I had projects that I needed to get out. I was thrilled to tell everyone that I would be able to get it all out faster with my new tool. And now I find that I am told to make my own grip? It's for miniature things! It's a miniature drill. So, here at Christmas, I am running to stores trying to find the specified things to make more stuff to make what I bought to save time work? No. With a loved on in the hospital, I needed something that was going to help, not send me all around the place buying and making stuff to use it.
Date de publication: 2015-12-12
Rated 1 de 5 de par Not precise or very well constructed Dremel does not offer the clamps, rather instructions on how to make them. There is way too much lateral play with the unit. Straight up and down is nearly impossible to achieve. For the MOST BASIC of tasks, this is almost acceptable. For ANY KIND of precision work, such as drilling a hole in carbon-fiber, don't bother. A simple, straight hole could not be duplicated on multiple attempts. Changed bits, rotary (Dremel branded) tools and even work surfaces to try and get repeatable clean passes on test material. I tried 2 cordless units and even bought a new corded unit to "justify" keeping this tool. Just too much plastic and complete lack of accuracy could not sway me to consider this a workbench worthy tool.
Date de publication: 2015-08-02
  • y_2024, m_7, d_3, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_199
  • loc_fr_CA, sid_1916265, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 6ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin