Perceuse à percussion à vitesse variable, 7 A, 1/2''

N° d'article 1983278 N° de modèle 1191VSRK Format1/2"x7A
Perceuse à percussion à vitesse variable, 7 A, 1/2''
 

Caractéristiques

La perceuse à percussion VSR 1191VSRK de 1/2'' (1,25 cm) Bosch est dotée d'un moteur réversible puissant de 7 A, qui produit le meilleur rapport poids/rendement de sa categorie et une variation de 0 à 3 000 tours par minute. Elle présente aussi une conception ergonomique. Les caractéristiques garantissent que la 119VSRK est conçue pour fournir le meilleur rapport poids-performances de sa catégorie. Utilisez le levier de sélection pour choisir le perçage avec percussion dans le béton dur. Transmission de puissance lisse et durée de vie prolongée de l'outil. Interrupteur à inversion de vitesse à commande complète pour le perçage, la conduite et le retrait des boulons ou des vis. Sélectionner le foret uniquement pour l'acier, le bois ou l'aluminium. Sélectionnez le mode perçage uniquement pour l'acier, le bois ou l'aluminium. L'ensemble inclut une poignée orientable sur 360°, une butée de profondeur et un coffret de transport. Garantie limitée 1 an.

Spécifications techniques

Type :Perceuse à percussion Composante :Métal/plastique Ampérage :7 A Battements par minute :0 à 48 000 Tours par minute :0 à 3 000 Mandrin :1/2 Vitesse :Variable/Réversible Garantie :Limitée 1 an Source d'alimentation :Électrique

Produits fréquemment achetés ensemble

YELLOW JACKET
Adaptateur pour protection DDFT portative, 1800 W, 15 A
N° d'article 32045050
N° de modèle 14650013-6
★★★★★ ★★★★★
0
(0)
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
N° d'article 32045053
N° de modèle 5139NSP
★★★★★ ★★★★★
3
(2)
WOODS
Cordon de rallonge électrique, 12/3, 25', rouge
Format 12/3 25'
N° d'article 74045239
N° de modèle 1697SW0002
★★★★★ ★★★★★
0
(0)
BOSCH
FORET MULTI-CONST. 5MCX
Format 5MX
N° d'article 19835461
N° de modèle MC500
★★★★★ ★★★★★
5
(1)
BOSCH
Forets Daredevil, ensemble de 10
Format 10MX
N° d'article 19835654
N° de modèle DSB5010
★★★★★ ★★★★★
5
(1)
BOSCH
Ens. forets à béton 7mcx
Format 7MX
N° d'article 19835449
N° de modèle HCBG700
★★★★★ ★★★★★
4,5
(2)

Vous pourriez aussi aimer

MAKITA
Trio perceuse, mélangeur et récipient
Format 1/2"x8.5AM
N° d'article 11975278
N° de modèle DS4011X
★★★★★ ★★★★★
0
(0)
MAKITA
Perceuse et mélangeur 8,5A
Format 1/2"x8.5AM
N° d'article 11975221
N° de modèle DS4011
★★★★★ ★★★★★
0
(0)
MAKITA
Perceuse sans fil VVR LXT, 18V
Format 1/2"x18V
N° d'article 11975347
N° de modèle DDF453SYE
★★★★★ ★★★★★
2
(1)
MAKITA
Clé à chocs sans fil, moteur sans balais, 1/4", 18 V
Format 1/4"x18V
N° d'article 11975404
N° de modèle DTD153Z
★★★★★ ★★★★★
0
(0)
MAKITA
Ensemble de perceuse à percussion, 1/2"
Format 1/2"x6AM
N° d'article 11975408
N° de modèle HP1641K
★★★★★ ★★★★★
5
(1)
MAKITA
Perceuse à percussion XPT - 18 V
Format 1/2"x18V
N° d'article 11975324
N° de modèle DHP458Z
★★★★★ ★★★★★
0
(0)
MAKITA
Perceuse VVR Makita 3/8 po avec mandrin sans clé
Format 3/8"x4.0AM
N° d'article 11975206
N° de modèle 6413K
★★★★★ ★★★★★
0
(0)
MAKITA
Visseuse à gypse, moteur sans balais, 18 V
Format 1/4"x18V
N° d'article 11975399
N° de modèle DFS452Z
★★★★★ ★★★★★
0
(0)
MAKITA
Visseuse à gypse 6,5 A
Format 1/4"x6.5AM
N° d'article 11975212
N° de modèle FS4000
★★★★★ ★★★★★
0
(0)
MAKITA
Marteau rotatif sans fil, 1-9/16'', Lithium Ion 36 V
Format 36V 1 9/16"
N° d'article 11975420
N° de modèle DHR400PT2
★★★★★ ★★★★★
0
(0)
MAKITA
Marteau rotatif électrique 2'', 15 A
Format 15.0AM
N° d'article 11975422
N° de modèle HR5212C
★★★★★ ★★★★★
0
(0)
DEWALT
Mèches impact FlexTorq, 2'' variées, paquet de 10
Format 2"-PK10
N° d'article 00277157
N° de modèle DWA2MX2IRCARC
★★★★★ ★★★★★
0
(0)
DEWALT
Mèches impact FlexTorq, 2'' carrées, paquet de 10
Format 2"-PK10
N° d'article 00277158
N° de modèle DWA2SQ2IRCARC
★★★★★ ★★★★★
0
(0)
BOSCH
Perceuse-mélangeur avec fil, 5/8", 9,0 A
Format 5/8"x9.0AM
N° d'article 19836315
N° de modèle GBM9-16BN
★★★★★ ★★★★★
4,7
(3)
DEWALT
Ensemble de perceuse/tournevis sans fil compacte 20 V Max
Format 1/2"x20V
N° d'article 00275783
N° de modèle DCD771C2
★★★★★ ★★★★★
4,5
(650)
DEWALT
Perceuse/visseuse compacte sans fil, 1/2", 20 V MAX
Format 1/2"x20V
N° d'article 00276320
N° de modèle DCD777C2
★★★★★ ★★★★★
4,6
(947)
CRAFTSMAN
Perceuse à percussion, 1 vitesse, 7 A, 3100 tr/min, rouge/noir
Format 1/2"x7AM
N° d'article 00276552
N° de modèle CMED741
★★★★★ ★★★★★
3,8
(149)
CRAFTSMAN
Perceuse-visseuse électrique sans fil, 20V MAX
Format 1/2"x20V
N° d'article 00276534
N° de modèle CMCD700C1
★★★★★ ★★★★★
4,5
(272)
BOSCH
Ensemble perceuse-visseuse, 1/2", 2 batteries SlimPack 18 V
Format 1/2"x18V
N° d'article 19836264
N° de modèle GSR18V-190B22
★★★★★ ★★★★★
4
(32)
CRAFTSMAN
Perceuse-visseuse avec cordon, 7 A, 3/8", 2500 tr/min
Format 3/8"
N° d'article 00276555
N° de modèle CMED731
★★★★★ ★★★★★
4,4
(44)
SKT
Marteau rotatif à trois fonctions
Format 10AM
N° d'article 59595099
N° de modèle ZIC-HW-3007SP
★★★★★ ★★★★★
4,2
(13)
DEWALT
Clé à chocs sans balai Dewalt, lithium-ion 20 V MAX , 1/4''
Format 1/4"x20V
N° d'article 00277189
N° de modèle DCF787C2
★★★★★ ★★★★★
4,9
(82)
BOSCH BULLDOG XTREME
Marteau perforateur SDS-plus(MD), mandrin de 1 po, 8 A
Format 1"x8A
N° d'article 19835194
N° de modèle 11255VSR
★★★★★ ★★★★★
4,8
(83)
BOSCH BULLDOG XTREME
Marteau perforateur Xtreme Max Bulldog(TM) SDS-plus®, 1 1/8"
Format 1 1/8"x8.5AM
N° d'article 19836167
N° de modèle GBH2-28L
★★★★★ ★★★★★
4,8
(22)
DEWALT
Perceuse à percussion VVR, 1/2 po, 7,8 A
Format 1/2"x7.8A
N° d'article 0027199
N° de modèle DW511
★★★★★ ★★★★★
4
(96)

Can i use an SDS max bit with this?

Posée par: cocoabwoi
  • y_2021, m_5, d_17, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_fr_CA, sid_1983278, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Perceuse à percussion à vitesse variable, 7 A, 1/2'' est évalué 2.6 de 5 de 26.
Rated 4 de 5 de par Good product for the $$$ I purchased this drill yesterday and also a couple Bosch hammer-drill bits. I needed four 5/8 holes in a patio slab that has been in place for 50+ years. I'd tried drilling it with a few days ago with a large 1/2 drill I had and was only able to drill an inch after a long time trying. This drill and a new bit (same as used with regular drill, just another one) did the trick in no time, the other three holes were drilled very quickly too. This is a light duty drill, no doubt, don't expect a contractor quality drill that can go all day. But then, you'll not have paid for that. Let it cool down and don't expect it to do things it wasn't meant to. You'll love it!
Date de publication: 2011-04-19
Rated 1 de 5 de par Purchased Today, Going Back Tomorrow Very First use of Drill with a 1/2 inch Bit. Chuck Came loose after about 3 seconds of drilling. Occured in both drill and hammer mode. Tightening the chuck did absolutely no good. As tight a I could manage and still came loose after a few seconds. The teeth on the chuck also break easily as it is tightened. The slippage was so bad that I managed to turn my 1/2 inch shank bit into a 3/8 inch shank. The quality was surprisingly poor and the design of the front grip is also poor. The knob for tightening the front grip is very small and hard to tighten without a set of pliers. Front grip rotates easily during use. Don't think that I will ever purchase Bosch again!
Date de publication: 2011-06-25
Rated 1 de 5 de par Quit working with few hours This drill was good value at $89 and drilled well. But it just quit working with very little use on the drill. I pulled the case apart and I have 120v coming out of the trigger but no current thru the windings. I called Bosch and they will charge $68 to fix it. I bought it 4 years ago but again very little use. I can buy a Porter Cable for $70 so that's what I will do. I have high dollar large hammer drills but I need a small one for many jobs. I thought Bosch was a good brand...not this drill. That will be my last Bosch tool.
Date de publication: 2013-12-13
Rated 3 de 5 de par Depends on what you need it to do. This drill works fine for putting holes in cinderblock, brick, or "young", less dense concrete. My garage is typical cinderblock and this drill made hanging shelves go much quicker than a regular drill. I also hung a sign into exterior brick for a friend's business with no problem. This drill is useless (even dangerous) for tough jobs. I have 90 year old house and the foundation walls and basement floor are as tough as steel. I think the walls also have various stones as aggregate in the mix. They laugh at this drill and I snapped and wore down half a dozen bits before I went out and rented a tool up for the task.
Date de publication: 2011-07-27
Rated 4 de 5 de par Good for light and medium duty jobs. Works excellent for drilling masonry; things such as tapcons. I wouldn't expect this drill to deal with really heavy, tough materials. In that case, don't buy a hammer drill - buy a rotary hammer instead (they are different). Pros: - decent price - works great, fast hammering action and reasonably powerful motor - hammer and plain rotary switch, multiple speeds Cons: - cheap plastic depth gauge and T-handle are weakest points - plastic around the switch area scrapes the skin if you aren't using gloves
Date de publication: 2011-08-15
Rated 1 de 5 de par Not capable Having Bosch table and miter saws I purchased this drill on the company name. WRONG!!! My son burned up the first drill on two holes with a 1/2 inch bit. After holding my tongue about how to use a drill I proceeded to show him how to let the drill do the work. Needless to say, I burned up the second drill on the first hole. l had a Black and Decker 1/2 inch hammer drill for 20 years with no problem until the cord got cut. We expected more out of Bosch. The Bosch chuck key didn't fit properly. The chuck actually started wobbling in the bearing. I just couldn't believe how incapable this drill is. Lowe's, on the other hand, always stands behind products they sell which is the main reason I shop at Lowe's at least once a day. Thank you Lowe's.
Date de publication: 2012-04-02
Rated 5 de 5 de par First use....I am impressed! I went to Lowes looking for the Hitachi 5/8 that was on sale and ended up taking this home because this is all they had in stock. I needed the drill today and thought I can return it if needed. Got home, drilled about a dozen Tapcon holes with a Tapcon Drill bit in 40 year old concrete and was thoroughly impressed with the hammer action and the speed. I agree with others that the depth gauge is a little cheap plastic, but its a nice feature. The attachment handle felt great and the tool was easy to control. I'm probably going to keep the tool for the occasional concrete drilling that I probably shouldn't be doing, but do anyways...You know what I mean.
Date de publication: 2013-06-09
Rated 1 de 5 de par Disappointed with Bosch I bought this drill because of the reviews, I do wall concrete installations with many projects, drilling holes 1" to 1 1/2" deep with 3/16 tapcon bit, I managed to drill 9 holes and I saw sparks and it stop working, I couldn't finish my job, I had 20 holes left to drill. I was very disappointed and so was my customer as he had expected the job to be completed that day, I returned it and went to Home Depot and bought me the Milwaukee 5/8 in.SDS Rotery hammer drill model#5263-21 it worked like a champ
Date de publication: 2014-03-29
  • y_2021, m_5, d_17, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_26
  • loc_fr_CA, sid_1983278, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 2ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin