Décor d'HalloweenDécorations gonflablesÉclairage et effets spéciaux Décorations d'intérieurDécorations d'extérieur

Cloueuse/agrafeuse pneumatique pour plancher, 1 1/2" à 2"

Article#00276202 Modèle#BTFP12569
Cloueuse/agrafeuse pneumatique pour plancher, 1 1/2" à 2"
 

Caractéristiques

Cette cloueuse/agrafeuse pour plancher de Bostitch permet d'enfoncer des agrafes de calibre 15 1/2 et des taquets en L de calibre 16 d'une longueur de 1 1/2 à 2 pouces, assurant ainsi une double fonction. Elle fait appel à un mécanisme de poussée pneumatique activé par maillet avec tir séquentiel afin d'offrir un fonctionnement optimal. Cet outil requiert une faible puissance pneumatique et possède un dispositif de débourrage sans outil. Sa conception ergonomique avec poignée longue à prise confortable ainsi que sa légèreté facilitent son utilisation et réduisent la fatigue. En outre, elle est assortie de bases antirayures interchangeables pour planchers de 1/2 pouce à 3/4 pouce.

Vous pourriez aussi aimer

CARPENTER AIR TOOLS
Cloueuse/agrafeuse à plancher pneumatique"Carpenter", 3 en 1
Article #330624724
Modèle #CFL5016
★★★★★ ★★★★★
0
(0)
FORESTO
Agrafeuse pneumatique de finition, calibre 18, 3/8"
Format 3/8"x18CA
Article #03395107
Modèle #FO3 M32
★★★★★ ★★★★★
0
(0)
CARPENTER AIR TOOLS
Cloueuse à plancher à agrafes en L "Carpenter", calibre 18
Article #330624721
Modèle #CFL4518
★★★★★ ★★★★★
0
(0)
CRISP-AIR
Cloueuse de vitrier Crisp Air, magnésium léger, calibre 18
Article #330674915
Modèle #CR1850
★★★★★ ★★★★★
0
(0)
MAKITA
Agrafeuse de finition, 1" à 2" en U, calibre 16
Format 1-2"x16CA
Article #11975380
Modèle #AT2550A
★★★★★ ★★★★★
0
(0)
METABO HPT
Cloueuse à toiture pneumatique à rouleaux, 7/8"-1 3/4", 16°
Format 7/8-1 3/4"x16DG
Article #37815178
Modèle #NV45AB2M
★★★★★ ★★★★★
4,8
(64)
PASLODE
Cloueuse « Lite-Line »
Format 23CA
Article #22935168
Modèle #HP100
★★★★★ ★★★★★
0
(0)
METABO HPT
Cloueuse à broches pneumatique, 1 3/8'', calibre 23
Format 5/8-1 3/8"xCA23
Article #37815212
Modèle #NP35AM
★★★★★ ★★★★★
4,7
(77)
CRISP-AIR
Cloueuse à rouleaux pour toiture Crisp-Air, calibre 120
Article #330674916
Modèle #CR3145
★★★★★ ★★★★★
0
(0)
PASLODE
Cloueuse / Agrafeuse
Format 18CA
Article #22935197
Modèle #P18-FS200
★★★★★ ★★★★★
2
(1)
METABO HPT
Cloueuse à charpente sans fil à 30 degré, 18 V Lithium-Ion
Format 2-3 1/2"x18V
Article #37815170
Modèle #NR1890DCM
★★★★★ ★★★★★
4,6
(17)
CRISP-AIR
Cloueuse à bande Crisp-Air pour charpente, magnésium léger
Article #330674912
Modèle #CR3490
★★★★★ ★★★★★
0
(0)
CARPENTER AIR TOOLS
Cloueuse à charpente "Carpenter", 21 °, clous à tête pleine
Article #330624719
Modèle #CFRN9021
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Cloueuse/agrafeuse 2 en un, 2 po
Format 18CA
Article #73455190
Modèle #SB504099AV
★★★★★ ★★★★★
1
(1)
PASLODE
Cloueuse à charpente pneumatique 3 1/4" «Paslode»
Format 2-3 1/4"x30DG
Article #22935203
Modèle #513000
★★★★★ ★★★★★
4,2
(21)
BOSTITCH
Cloueuse pneumatique en aluminium jaune
Format 1/[email protected]"x23CA
Article #0277085
Modèle #HP118K
★★★★★ ★★★★★
4
(6)

Spécifications techniques

Débit d'air :3,7 pi³/min requis Type :Cloueuse/agrafeuse pneumatique pour plancher Style :2 en 1 Composante :Métal Couleur :Orange/gris Angle du magasin :À angle Hauteur :8 1/4" (20,95 cm) Largeur :3" (7,62 cm) Longueur :10 1/8" (25,73 cm) Calibre :Calibres 15 1/2 et 16 Entrée d'air :1/4" Quantité par boite :1 pièce Capacité du magasin :100 Désenrayage :Sans outil Réglage de la profondeur :Réglable Pression :70 à 120 lb/po² Type d'attache :Agrafes et taquets Longueur d'attache :Agrafes et taquets en L de 1 1/2" à 2" (3,81 cm à 5,08 cm) Inclus :Maillet, raccord pneumatique, bases antirayures interchangeables pour planchers de 1/2" à 3/4" Emballage :1 unité

What gauge are the Bostich flooring cleats?

Posée par: Ricknailer
Most staples and cleats are marked 15.5 gauge which work for the 16 gauge gun. Its standard for all flooring staplers.
Répondue par: DIGGZ
Date de publication: 2019-06-16

I just purchased the Bostitch item 572656 3 tool compressor. Is this compatable with the Bostitch 2 in1 floor nailer, item 689186. The compressor list 2.7 scfm at 90 psi.

Posée par: Mhughesinfonthill
Yes that 6 Ga compressor works with this floor nailer without any issue.
Répondue par: Diyeverything
Date de publication: 2018-12-06

Does this tool work on engineered flooring

Posée par: Martie
This would work well on 3/4 inch engineered wood. 1/2 inch engineered flooring would require an 18 gauge nailer to avoid damaging the tongue.
Répondue par: What do I know
Date de publication: 2018-06-04

Can you use 1 1/2 in nails on 2 in nailer? Please and thankyou

Posée par: Ehbd
Yes (according to the fastener specification quoted in the manual) Never tried myself. This nailer is very good and reliable.
Répondue par: friend123
Date de publication: 2018-05-28

hi the nail gun Bostich item BTFP 1256  2in 1 this gun can use type L NAIL and staple ?please me know if i order now safe tax right

Posée par: xuan78
  • y_2020, m_1, d_26, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_fr_CA, sid_00276202, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Cloueuse/agrafeuse pneumatique pour plancher, 1 1/2" à 2" est évalué 4.5 de 5 de 66.
Rated 4 de 5 de par Time saver for an old guy I had to replace a few tongue & groove boards on my porch. In the past I have rented nailers with poor time consuming results. I found this Bostitch nailer which is identical to the Dewalt nailer with the same model #. I have only shot 50 or so nails through it but I can say it makes the job so much easier. I was nailing 5/4 tongue & groove Douglas Fir. I shot the nails with no plastic base plate installed so the nails would go through the top of the tongue. No problems just don't hit too hard. I have a lot of 3/4 Oak flooring to put down this winter. Hopefully the nailer continues to give great results. I have no reason to think it won't.
Date de publication: 2015-10-09
Rated 5 de 5 de par Bought this to install 3/4" oak in my second floor and it worked great. I bought vs rent because for the price, you break even at about 1 week of rental. Super simple tool, just oiled daily and had no problems other than user error for the entire project. If I had to do a floor again, I'd buy this in a heartbeat. FYI, I used the Bostitch pancake compressor with the 3 tools. It supplied enough air overall, but had to run a lot when I really got going on a run. I also used the 2" L-shaped cleats which worked very well.
Date de publication: 2015-08-28
Rated 5 de 5 de par Great/Tool I purchased this tool to install 3/4 in maple hardwood floors. I used my military discount to buy this tool. Great Price. I like this tool b\c it uses either cleats or staples. I placed a 200 sq ft room and had NO problems with this tool. It worked well with no mis fires and placed 1500 cleats. I oiled it dailt b\f use. I also liked that the tool came with several face plates for differrent types of flooring thickness.
Date de publication: 2016-12-30
Rated 5 de 5 de par Bostitch nailer works perfectly I am halfway through finishing the main floor of my home (about 1000 sqaure feet so far) and the nailer has worked perfectly. No jams, no misfires; nothing. It has worked perfectly. I am using the 2 inch nails; not the staples and am having great luck so far. Buy this product with confidence.
Date de publication: 2016-01-21
Rated 5 de 5 de par Great tool I purchased this nailer to install solid hickory flooring. Although I had read reports of splintered tongues, I had no trouble using the 2 inch cleats. I experienced one minor jam in thousands of cycles. The issue was easy to resolve and might have been caused by a defective cleat. Generally, this tool provides a very consistent fastener application and does a great job pulling in warps. It is easy to load and no special skill is required o operate it. This is a well made and very robust tool that should hold up over many years.
Date de publication: 2017-04-03
Rated 4 de 5 de par Be careful with engineered woods I bought this nailer after much research to install a 1/2" engineered bamboo floor. At first I started with 2" staples as that is what the floor manufacturer recommended, but quickly discovered that staples would not work as none would seat correctly. It was consistent that one side of the staple would either curl, or crumple. I tried adjusting the air regulation but to no avail. I'm not sure if this problem was due to the nailer or because of the density of the engineered bamboo. I switched over to L Cleats and had almost 100% success rate in seating for 800 square feet of flooring and about 2000 cleats. I put in a few drops of the supplied oil after every 8 hours of usage and have not had any issues. You will not be able to use this nailer on the beginning strip against a wall or the last two strips against a wall. So, either be ready to mess with some glue, or look at buying a finishing nailer to take care of those areas. Good luck!
Date de publication: 2017-01-09
Rated 5 de 5 de par Time saver The pneumatic nailer has been a great time saver. After nailing the first few rows of hardwood using an air gun nailer, switching to this stapler nailer has made the process much easier. I have to advise hitting the plunger with consistent force to ensure the staples are completely recessed above the tongue of the board. Otherwise it's difficult to remove the 2" staple without damaging the hardwood. Also too much pressure can cause splitting. Overall, we've really enjoyed using it.
Date de publication: 2015-11-25
Rated 5 de 5 de par Great buy Bought this to lay 3/4" thick oak flooring. My 15 year old son used it without a hitch. He did the nailing while I picked through the wood to lay. I would buy again without a doubt. Easy to load and operate. Oiled it once a day and used 2"cleats. Have the upper floor of our home almost done. They built a real nailgun with this one.
Date de publication: 2016-07-15
  • y_2020, m_1, d_26, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_66
  • loc_fr_CA, sid_00276202, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Produits fréquemment achetés ensemble

CAMPBELL HAUSFELD
Compresseur à air électrique « Quiet Series », 8 gal, 1,0 HP
Format 8GAx1HP
Article #73455217
Modèle #DC080500
★★★★★ ★★★★★
5
(2)
CAMPBELL HAUSFELD
Gonfleur de pneus avec manomètre
Format 10-100LB
Article #73455195
Modèle #MP600000AV
★★★★★ ★★★★★
1
(1)
CAMPBELL HAUSFELD
Ensemble de raccords et connecteurs
Format 4MX
Article #7345028
Modèle #MP211900AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Pistolet à air
Article #7345042
Modèle #MP514300AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Tuyau à air en nylon, 25 pi
Format 1/4"x25'
Article #73455178
Modèle #MP268100AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Compresseur vertical, 80 gal, 5 CV
Format 80GAx5HP
Article #73455239
Modèle #XC802100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Compresseur à air vertical, 60 gallons, 3,7 HP
Format 60GAx3.7HP
Article #73455238
Modèle #XC602100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Lubrifiant pour outils pneumatiques
Format 8OZ
Article #7345065
Modèle #ST127012AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ensemble de 17 accessoires
Format 17MX
Article #7345027
Modèle #MP284701AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ensemble d'accessoires pour compresseur d'air de 20 pièces
Format 20MX
Article #73455233
Modèle #MP604103AV
★★★★★ ★★★★★
0
(0)

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin