Cloueuse à toiture à bobine, 3/4" à 1 3/4", 15°

N° d'article 00277070 N° de modèle BRN175A Format3/4-1 3/4"x15DG
Cloueuse à toiture à bobine, 3/4" à 1 3/4", 15°
 

Caractéristiques

Cette cloueuse à rouleau pour toiture de Bostitch présente un réglage de profondeur facile à utiliser et un réglage pour bardeau entièrement ajustable pour clouer parfaitement à chaque fois. Sa cartouche latérale exclusive à action unique permet de charger rapidement les clous en une seule étape. Cette cloueuse est munie d'un boîtier en magnésium qui assure sa durabilité et sa légèreté sur les chantiers. Les protecteurs de châssis et les coussinets en caoutchouc protègent le châssis des bardeaux abrasifs, tandis que les garnitures de carbure dans l'embout de la clouteuse assurent sa durabilité. La fonction de verrouillage exclusive empêche l'outil de clouer à vide. Garantie du manufacturier de 7 ans.

Spécifications techniques

Longueur d'attache :Clous 3/4'' (1,90 cm) à 1 3/4'' (4,44 cm) Désenrayage :Oui, sans outil Angle du magasin :15° Composante :Métal Modèle :BRN175A Réglage de la profondeur :Oui, sans outil Style :Air comprimé Type :Toiture Type d'attache :Clous à bobine Garantie :Garantie limitée de 7 ans

Produits fréquemment achetés ensemble

CAMPBELL HAUSFELD
Compresseur à air vertical Campbell Hausfeld, 60 gallons, 3,7 hp
Format 60GAx3.7HP
N° d'article 73455238
N° de modèle XC602100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Compresseur vertical Campbell Hausfeld, 80 gallons, 5 hp
Format 80GAx5HP
N° d'article 73455239
N° de modèle XC802100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Compresseur à air électrique « Quiet Series », 8 gal, 1,0 HP
Format 8GAx1HP
N° d'article 73455217
N° de modèle DC080500
★★★★★ ★★★★★
5
(5)
CAMPBELL HAUSFELD
Gonfleur de pneus avec manomètre
Format 10-100LB
N° d'article 73455195
N° de modèle MP600000AV
★★★★★ ★★★★★
1
(2)
RCR
Boyau à air «Contracteur»
Format 3/8"x50'
N° d'article 0412763
N° de modèle HAC3850
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Lubrifiant pour outils pneumatiques
Format 8OZ
N° d'article 7345065
N° de modèle ST127012AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Pistolet à air
N° d'article 7345042
N° de modèle MP514300AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ensemble d'accessoires pour compresseur d'air de 20 pièces
Format 20MX
N° d'article 73455233
N° de modèle MP604103AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ensemble de raccords et connecteurs
Format 4MX
N° d'article 7345028
N° de modèle MP211900AV
★★★★★ ★★★★★
0
(0)
DEGIL SAFETY
Lunettes de sécurité
N° d'article 86575158
N° de modèle 7050500
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ensemble de 17 accessoires
Format 17MX
N° d'article 7345027
N° de modèle MP284701AV
★★★★★ ★★★★★
0
(0)
DEGIL SAFETY
Lunette de sécurité
N° d'article 8657090
N° de modèle 7052000
★★★★★ ★★★★★
4,9
(7)
CAMPBELL HAUSFELD
Tuyau à air en nylon, 25 pi
Format 1/4"x25'
N° d'article 73455178
N° de modèle MP268100AV
★★★★★ ★★★★★
0
(0)

Vous pourriez aussi aimer

MAKITA
Cloueuse à toiture à air comprimé, 3/4" à 1 3/4"
N° d'article 11975432
N° de modèle AN454
★★★★★ ★★★★★
0
(0)
MAKITA
Cloueuse de finition, 1 1/4" à 2 1/2", calibre 15
Format 2 1/2"x15CA
N° d'article 11975386
N° de modèle AF635
★★★★★ ★★★★★
0
(0)
MAKITA
Cloueuse à charpente, clous 2" à 3 1/2" à tête demi-lune, 34°
Format 2-3 1/2"
N° d'article 11975378
N° de modèle AN943
★★★★★ ★★★★★
1
(1)
MAKITA
Agrafeuse de finition, 1" à 2" en U, calibre 16
Format 1-2"x16CA
N° d'article 11975380
N° de modèle AT2550A
★★★★★ ★★★★★
0
(0)
MAKITA
Agrafeuse pneumatique de calibre 16, 7/16" x 1" à 2"
Format 7/16"x16CA
N° d'article 11975377
N° de modèle AT1150A
★★★★★ ★★★★★
0
(0)
METABO HPT
Cloueuse de finition pneumatique à bandes, 5/8"-2"
Format 5/8-2"x18CA
N° d'article 37815180
N° de modèle NT50AE2M
★★★★★ ★★★★★
4,5
(513)
ARROW
Agrafeuse pneumatique 120 PSI, T50
N° d'article 00125088
N° de modèle PT50
★★★★★ ★★★★★
4,6
(809)
BOSTITCH
Cloueuse/agrafeuse pneumatique pour plancher, 1 1/2" à 2"
N° d'article 00276202
N° de modèle BTFP12569
★★★★★ ★★★★★
4,5
(81)
BOSTITCH
Cloueuse de finition pneumatique, calibre 18, 5/8" à 2"
Format 5/8-2"x18CA
N° d'article 00276209
N° de modèle BTFP1850K
★★★★★ ★★★★★
4,1
(16)
METABO HPT
Agrafeuse de finition, calibre 18, 1/4" x 1/2" à 1 1/2"
Format 1/2-1 1/2"x18CA
N° d'article 37815177
N° de modèle N3804AB3M
★★★★★ ★★★★★
4,7
(99)
PASLODE
Cloueuse / Agrafeuse
Format 18CA
N° d'article 22935197
N° de modèle P18-FS200
★★★★★ ★★★★★
3,5
(2)
PASLODE
Cloueuse « Lite-Line »
Format 23CA
N° d'article 22935168
N° de modèle HP100
★★★★★ ★★★★★
0
(0)
METABO HPT
Cloueuse à main pneumatique Metabo HPT, 2 1/2"-3 1/2"
Format 2 1/2-3 1/2"
N° d'article 37815205
N° de modèle NH90ABM
★★★★★ ★★★★★
4,8
(4)
METABO HPT
Cloueuse à charpente pneumatique pour clous à tête ronde, 16°
Format 1 3/4-3 1/2"x16DG
N° d'article 37815179
N° de modèle NV90AGSM
★★★★★ ★★★★★
4,2
(13)
PASLODE
Agrafeuse à rembourrage
Format 22CA
N° d'article 2293124
N° de modèle US-100
★★★★★ ★★★★★
5
(1)
METABO HPT
Cloueuse à toiture pneumatique à rouleaux, 7/8"-1 3/4", 16°
Format 7/8-1 3/4"x16DG
N° d'article 37815178
N° de modèle NV45AB2M
★★★★★ ★★★★★
4,8
(111)
BOSTITCH
Cloueuse pneumatique en aluminium jaune
Format 1/[email protected]"x23CA
N° d'article 0277085
N° de modèle HP118K
★★★★★ ★★★★★
4
(6)
FORESTO
Agrafeuse pneumatique de finition, calibre 18, 3/8"
Format 3/8"x18CA
N° d'article 03395107
N° de modèle M32
★★★★★ ★★★★★
0
(0)
PASLODE
Cloueuse à charpente Paslode, tête en D, bande de 84 clous
Format 2-3 1/4"x30DG
N° d'article 2293057
N° de modèle 501000
★★★★★ ★★★★★
4,4
(20)
BOSTITCH
Cloueuse pneumatique à charpente
Format 2 @3 1/2"
N° d'article 0277074
N° de modèle F28WW
★★★★★ ★★★★★
3,7
(13)
METABO HPT
Cloueuse de finition sans fil, calibre 16, 18 V Lithium-Ion
Format 1-2.5"x16CAx18V
N° d'article 37815172
N° de modèle NT1865DMM
★★★★★ ★★★★★
4,4
(84)
METABO HPT
Cloueuse de finition sans fil, calibre 18,18 V Lithium-Ion
Format 5/8-2"x18CAx18V
N° d'article 37815171
N° de modèle NT1850DEM
★★★★★ ★★★★★
4,4
(100)
METABO HPT
Cloueuse à charpente sans fil à 30 degré, 18 V Lithium-Ion
Format 2-3 1/2"x18V
N° d'article 37815170
N° de modèle NR1890DCM
★★★★★ ★★★★★
4,7
(79)
CRISP-AIR
Agrafeuse à couronne étroite DIY par Crisp-Air
N° d'article 330786003
N° de modèle APF9040
★★★★★ ★★★★★
0
(0)
CRISP-AIR
Cloueuse à bande Crisp-Air pour charpente, magnésium léger
N° d'article 330674912
N° de modèle CR3490
★★★★★ ★★★★★
0
(0)

what is the difference between this and bostichs other RN46 nailer?

Posée par: ATC84
  • y_2021, m_5, d_12, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_fr_CA, sid_00277070, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Cloueuse à toiture à bobine, 3/4" à 1 3/4", 15° est évalué 3.5 de 5 de 31.
Rated 5 de 5 de par 4 Thousand Nails Later Put over four thousands nails through this gun with only two jams throughout the whole job, I put a little oil in the air inlet and didn't have a problem for the rest of the day..After that I put in a little at the start of each day and it worked just fine. The other issues that I had were due to the inconsistent pressure output from my so-called 'professional' air compressor that I purchased from HF, but that is a different issue altogether. I am extremely pleased with this roofing nailer, the only thing that could make it better was having a swivel air hose attachment to make getting into tight spaces easier.
Date de publication: 2016-10-04
Rated 4 de 5 de par Roofing Nailer Minimal problem with nailer. Liked the price was much less than other coil nailers. Easy to setup & use. Used on 2+ square shingle job. Only problem I had was on last nail on couple of the nail coils. One nail some how did 180 degree flip and got jammed in the gun hammer mechanism. Took a few minutes to clear with hammer & dowel pin, driving the air gun hammer mechanism back into up/home position. Had another last nail try to do similar. For non-professional, I think this is an excellent nail gun & recommend purchase
Date de publication: 2016-11-23
Rated 4 de 5 de par Faithful [This review was collected as part of a promotion.] This roofing Nailer has seen loads of use and abuse. I can always count on it to be dependable and never jam or misfire.
Date de publication: 2019-02-18
Rated 5 de 5 de par Great purchase for the price I bought this gun to roof a small 10'x14' entryway. It did a great job. No problems. Would recommend it to anyone who has a small amount of roofing.
Date de publication: 2015-08-14
Rated 5 de 5 de par So far great I only have about 600 nails through it. It is great for what I need it for.
Date de publication: 2016-07-04
Rated 5 de 5 de par Bostitch Roofing Nail Gun - 2015 With the son-in-law wanting to save a few bucks by reroofing his garage, so he asked for my help even though I can no longer get up there for health reasons and he knew it. He said that all I had to do was hand the shingles up to him two at a time as we went along. Well, the wife and I had to go to Lowe's for a few items when she asked where they kept the nailing guns. I took her back to them and about froze when I saw the prices. She didn't flinch one bit. She looked at this gun and then the Hitachi at about $50 more. She came back to this one. Luckily, the store showed two in the inventory, but actually only had one. So we purchased the gun along with the nails and a few bottles of oil and dropped it all off at my son-in-laws house for the next day. When we got home that night, I decided to read the reviews and was dismayed at how many couldn't seem to get it to perform as it should have. Then I noticed the dates. Many of the reviews were three or more years old. And how many of the reviewers took this item back and grabbed the Hitachi. Fearing the worst, I took along an extra male coupling to fit the air hose on my compressor (many of the reviews stated that the nailer right out of the box didn't have the coupling like other manufacturers models) , and proceeded to go at it. I was surprised to see that Bostitch payed attention to the numerous complaints. I threw some oil in it, made a few adjustments. Practiced on a piece of scrap lumber and AWAY WE WENT. It worked like a champ after a few more minor adjustments, and the few times that it did fail was attributed to operator or should I say supervisor error ( me on the ground ). I forgot to turn the compressor back on a couple of times when we took a break. With the sun ( the temps hit 100 that day ) beating down on everyone (my daughter came and gave her husband a hand up on the roof sorting and laying shingles and nailing things down when she got the chance) the job went quite fast. What would have been an almost 12 hour job by hand and hammer, turned into just a little over 6 hour job. So here's the deal with this gun - KEEP IT OILED (every time you load a new coil of nails, one squirt of oil). Keep your pressure at a steady 100 pounds. Make ALL of your adjustments on a scrap piece of lumber prior to starting the job. When replacing the coil of nails - ALWAYS! ALWAYS REMOVE THE SOURCE OF POWER!! In this case, disconnect the air hose from the gun. My son-in-law couldn't understand this part, but after I explained to him the safety issues involved, and that as long as I was in the area, if he didn't abide by my rules and I happened to get hurt because of him, my daughter would have to visit him in the hospital. All things said, this is a great little gun once you get it set up. Have a great time on your roof. Play it safe. And enjoy it for years to come. PS....I've got two sheds that will need new roofs next year, so for payback, I have my crew already picked out.
Date de publication: 2015-09-10
Rated 3 de 5 de par easy to use, but the nail depth not consistent Loading and using the gun was easy to learn, but the depth of the nails was inconsistent. We adjusted the compressor pressure to keep it between 90 and 120 psi. We also ensured the gun was held at the proper angle and was flat to the board and the depth still varied.
Date de publication: 2017-07-20
Rated 1 de 5 de par EXPECT SOME UNEVEN ISTALATION I first bought a HITACHI and it work perfect even for a professional installation but we need an extra one and saw this one and I ask for some assistance TREE TIMES I was there for an hour and NO ONE CAME so I use the EMPLOYES ONLY LADDER AND PICKED IT UP MY SELF AND STAR TO USE IT INMEDIATLY BUT AFTER 10 MINUTES I notice that the roof shingle was uneven and check the shingle spacer in the gun, IT MOVED and was like 1 1/2 difference so we waist like $200 in material cause the freaking SPACER IS SO WEACK SO BETTER SPEND A LITTLE MORE AN GET ONE W BETTER SPACER A SOLID ONE
Date de publication: 2015-12-08
  • y_2021, m_5, d_12, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_31
  • loc_fr_CA, sid_00277070, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin