Décor d'HalloweenDécorations gonflablesÉclairage et effets spéciaux Décorations d'intérieurDécorations d'extérieur

Cloueuse pneumatique à charpente

Article#0277074 Modèle#F28WW Format2 @3 1/2"
Cloueuse pneumatique à charpente
 

Caractéristiques

Cloueuse pneumatique à charpente. Clous sur baguette de 28°. Boîtier léger en magnésium. Puissance de 1050 po/lb pour bois de construction hors série. Contrôle de profondeur breveté par bouton-pressoir. Sortie d'air orientable. Dents mordantes pour clouage en biais. 4 bandes d'alimenttation pouvant contenir jusqu'à 100 clous. Protecteurs en acier avec lames de caoutchouc anti-dérapantes. Taille des agrafes : 2 po à 3 1/2 po.

Vous pourriez aussi aimer

CRISP-AIR
Cloueuse à toîture Crisp Air légère, calibre 120
Article #330674913
Modèle #APF3145
★★★★★ ★★★★★
0
(0)
PASLODE
Cloueuse à charpente pneumatique 3 1/4" «Paslode»
Format 2-3 1/4"x30DG
Article #22935203
Modèle #513000
★★★★★ ★★★★★
4,2
(21)
CRISP-AIR
cloueuse de cadrage Crisp Air
Article #330674914
Modèle #APF3490
★★★★★ ★★★★★
4
(2)
BOSTITCH
Cloueuse à toiture à bobine, 3/4" à 1 3/4", 15°
Format 3/4-1 3/4"x15DG
Article #00277070
Modèle #BRN175A
★★★★★ ★★★★★
3,6
(28)
CARPENTER AIR TOOLS
Cloueuse à plancher à agrafes en L "Carpenter", calibre 18
Article #330624721
Modèle #CFL4518
★★★★★ ★★★★★
0
(0)
MAKITA
Cloueuse de finition, 1 1/4" à 2 1/2", calibre 15
Format 2 1/2"x15CA
Article #11975386
Modèle #AF635
★★★★★ ★★★★★
0
(0)
CRISP-AIR
Cloueuse à rouleaux pour toiture Crisp-Air, calibre 120
Article #330674916
Modèle #CR3145
★★★★★ ★★★★★
0
(0)
METABO HPT
Cloueuse de finition sans fil, calibre 16, 18 V Lithium-Ion
Format 1-2.5"x16CAx18V
Article #37815172
Modèle #NT1865DMM
★★★★★ ★★★★★
4,4
(63)
CARPENTER AIR TOOLS
Cloueuse à charpente "Carpenter", 21 °, clous à tête pleine
Article #330624719
Modèle #CFRN9021
★★★★★ ★★★★★
0
(0)
BOSTITCH
Cloueuse/agrafeuse pneumatique pour plancher, 1 1/2" à 2"
Article #00276202
Modèle #BTFP12569
★★★★★ ★★★★★
4,5
(66)
METABO HPT
Cloueuse à charpente sans fil à 30 degré, 18 V Lithium-Ion
Format 2-3 1/2"x18V
Article #37815170
Modèle #NR1890DCM
★★★★★ ★★★★★
4,6
(17)
MAKITA
Cloueuse à charpente, clous 2" à 3 1/2" à tête demi-lune, 34°
Format 2-3 1/2"
Article #11975378
Modèle #AN943
★★★★★ ★★★★★
1
(1)
MAKITA
Agrafeuse de finition, 1" à 2" en U, calibre 16
Format 1-2"x16CA
Article #11975380
Modèle #AT2550A
★★★★★ ★★★★★
0
(0)
CARPENTER AIR TOOLS
Cloueuse/agrafeuse à plancher pneumatique"Carpenter", 3 en 1
Article #330624724
Modèle #CFL5016
★★★★★ ★★★★★
0
(0)
CRISP-AIR
Agrafeuse à couronne étroite Crisp-Air, 90/40 po. calibre 18
Article #330674917
Modèle #CR9040
★★★★★ ★★★★★
0
(0)
METABO HPT
Cloueuse à main pneumatique Metabo HPT, 2 1/2"-3 1/2"
Format 2 1/2-3 1/2"
Article #37815205
Modèle #NH90ABM
★★★★★ ★★★★★
0
(0)

Spécifications techniques

Entrée d'air :1/4" Type :Charpente à bande Modèle :F28WW Composante :Magnésium Angle du magasin :28° Capacité du magasin :100 Désenrayage :Oui Réglage de la profondeur :Oui, sans outil Pression :70 à 120 lb/po.ca. Longueur d'attache :2" à 3 1/2 Garantie :Garantie limitée 7 ans Poids :7,8 lbs

Can I use "Bostitch BTFP1KIT-CA 0.8 HP 6-gal 150 PSI Pancake-Tank Electric Air Compressor " to drive this tool?

Posée par: su wei
Specs state 80 - 120lbs operating pressure - the pancake compressor comes with a factory setting of 90-150 cutin cutout setting. So it all depends on how fast you pull the trigger and whether or not your hose couplers are weeping air. If you don’t want the compressor cycling often ( approx every 200 nails) add a inline auxiliary tank ! 
Répondue par: BCTenerizer
Date de publication: 2019-04-08
  • y_2020, m_1, d_21, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_0277074, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Cloueuse pneumatique à charpente est évalué 3.7 de 5 de 13.
Rated 5 de 5 de par Great addition This is a great framing nailer. I've already used it on two different projects shooting around 2,000 nails of two different sizes with no jams or any other problems. The continuous trigger was easy to install and the depth adjuster is easy and works perfectly. It's truly a lifesaver. If you are a framing contractor you would probably want to purchase the Bostich framing nailer that's heavier because it's probably more durable for everyday usage for year in and year out, but for anything else I would recommend this one because it's lighter. It's a great addition to my tool collection.
Date de publication: 2011-06-30
Rated 4 de 5 de par Very satisfied I've only used this nailer on one project so far but it performed flawlessly. We replace 70 sections of fence (the kind you find in the planned communities in the Houston area) , shot over 5,000 nails and it didn't jam a single time. It's easy to use and seems of good sturdy quality. The only issue I see is that the Bostich nails cost about twice other brands. Not a big problem when you buy 2,000 per box but still Bostich could be more competitive on the price of nails.
Date de publication: 2011-05-11
Rated 5 de 5 de par Don't even think about any other nail gun!!! I am a building contractor who buys 10-12 boxes of framing nails at a time. I own several different types/brands of nailers. My crew fueds over who gets to use these framing guns. One guy even shows up early just to be sure he gets one of these. This gun holds more nails than the plastic colated guns so you don't need to load it as often. I don't notice them jamming nearly as often as the plastic guns. The wire nails can get wet and still fire while the paper nails constantly jam or fall apart after they get wet. Over all they are the best all around framing gun that we use. The only negative thing that I can think of is that they dont hold as many nails as the coil framming guns, which is nice when nailing sheeting, but the coil magazine seem to get in the way when doing any other framing opperation. The longevity of these guns is unbelievable. In 12 years of almost daily use I've only ever had to scrap one of these guns, and that was because it fell 16' onto a concrete floor. Keep them oiled and the air pressure regulated and they should be as good to you as mine have been to me.
Date de publication: 2012-01-28
Rated 5 de 5 de par Wow, that was fast!!!!!!!!!!!!!!! Framing my basement has been a snap with this. I used a pancake compressor and works just fine at 90-100 psi. No jams through 1000 3-1/2 inch nails (Bostitch brand). 1 drop of oil before each use. I didn't install the rapid trigger as I am OK doing it one at a time and is more accurate and less dangerous. When roofing I like the tap and go... I have some tendentious in my arm and didn't weigh enough to bother it during use. Great tool. Hanger is a plus. A bag/case would have been nice with it. Almost don't want to be done framing.... [This review was collected as part of a promotion.]
Date de publication: 2018-12-10
Rated 5 de 5 de par Best Ever I've worked in the industry for a lot of years. From Florida to Texas, all a cross the gulf coast, and up to Richmond, VA. Have used Duo fast to Bostitch. This one is good quality, lite and fits into most all spots needed. I love it. I recommend it to any one.
Date de publication: 2011-02-04
Rated 5 de 5 de par Great nailer!! Great product. I bought a home with a 1500 sqft unfinished basement. Me, dad and my brother framed up the whole place in 12 hours with this nailer. I never had a jam and it holds pressure perfectly. Buy this nailer!
Date de publication: 2011-08-03
Rated 5 de 5 de par Bostich Framinig Nailer Great purchases! This nailer does what its supposed to do, it nails. The last one i bought lasted 20 years, and tens of thousands of nails, other than replacement of O rings for air leaks, thats it. The name Bostich says it all.....I wouldnt buy any other brand
Date de publication: 2013-06-26
Rated 1 de 5 de par Garbage stopped working after half a deck, took it in for warranty repair since it was over a month old, waste of time and they would not repair it, said i used to much oil, if thats even possible and WITHOUT EVEN OPENING IT. Warranty doesnt mean a thing, never buying Bostitch and will forever tell others their garbage
Date de publication: 2019-09-15
  • y_2020, m_1, d_21, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_fr_CA, sid_0277074, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Produits fréquemment achetés ensemble

CAMPBELL HAUSFELD
Compresseur vertical, 80 gal, 5 CV
Format 80GAx5HP
Article #73455239
Modèle #XC802100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Compresseur à air électrique « Quiet Series », 8 gal, 1,0 HP
Format 8GAx1HP
Article #73455217
Modèle #DC080500
★★★★★ ★★★★★
5
(2)
CAMPBELL HAUSFELD
Compresseur à air vertical, 60 gallons, 3,7 HP
Format 60GAx3.7HP
Article #73455238
Modèle #XC602100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Pistolet à air
Article #7345042
Modèle #MP514300AV
★★★★★ ★★★★★
0
(0)

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin