Compresseur à air sur chariot, 4 gal

Article#0027688 Modèle#D55154 Format4Gx1.1HP
Compresseur à air sur chariot, 4 gal
 

Caractéristiques

Le compresseur électrique Dewalt D55154 est muni de deux roues pneumatiques de 10" et d'une poignée qui lui confèrent une grande mobilité et une facilité de transport. La pompe lubrifiée à l'huile et le cylindre en fonte améliorent la durabilité de ce compresseur, alors que le régulateur à haut débit d'air lui assure une performance accrue et une reprise rapide. Cet outil comprend un drain avec clapet à bille et une plaque supérieure qui sert de chariot pour aider à transporter des articles.

Spécifications techniques

Garantie :Garantie d''un an, contrat de service gratuit d'un an, garantie de remboursement de 30 jours Débit d'air :3.8; 4,[email protected]; [email protected], [email protected] Capacité du réservoir :4 gal HP en continu :1,1 CV

Produits fréquemment achetés ensemble

YELLOW JACKET
Adaptateur pour protection DDFT portative, 1800 W, 15 A
Article #32045050
Modèle #14650013-6
★★★★★ ★★★★★
0
(0)
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Article #32045053
Modèle #5139NSP
★★★★★ ★★★★★
3
(2)
WOODS
Cordon de rallonge électrique, 12/3, 25', rouge
Format 12/3 25'
Article #74045239
Modèle #1697SW0002
★★★★★ ★★★★★
0
(0)

Vous pourriez aussi aimer

METABO HPT
Compresseur à air électrique, 1 gal, 0,5 CV
Format 1GAx0.5HP
Article #37815185
Modèle #EC28MM
★★★★★ ★★★★★
4,9
(8)
MAKITA
Ensemble compresseur 2 hp et cloueuse, 4 pièces
Format 2HPx5/8-2"x18CA
Article #11975374
Modèle #MAC700-KIT3
★★★★★ ★★★★★
5
(1)
MAKITA
Compresseur à air à l'huile
Format 4.2GAx2.5HP
Article #11975242
Modèle #MAC2400
★★★★★ ★★★★★
4
(1)
MAKITA
Compresseur à air 1 gal, sans huile, 1 hp
Format 1.0HP
Article #11975397
Modèle #AC001
★★★★★ ★★★★★
0
(0)
METABO HPT
Compresseur à air Metabo HPT, 6 gal, 150 lb/po², vert et noir
Format 6GAx150PSI CA18
Article #37815227
Modèle #KNT50ACM
★★★★★ ★★★★★
0
(0)
BOSTITCH
Compresseur 2HP de 6 gallons et cloueuse Calibre 18
Format 6GAx2HP
Article #10645001
Modèle #BTFP1KIT-CA
★★★★★ ★★★★★
4,5
(22)
BOSTITCH
Compresseur, cloueuse et agrafeuse en acier jaune et noir
Article #02775157
Modèle #BTFP3KIT-CA
★★★★★ ★★★★★
4,6
(10)
CRAFTSMAN
Compresseur sans huile, 6 gallons, 150 lb/po², rouge et noir
Format 6GA
Article #00277116
Modèle #CMEC6150
★★★★★ ★★★★★
4,7
(314)
CAMPBELL HAUSFELD
Ensemble de compresseur 3 gallons et cloueuse
Format 3GA
Article #20185001
Modèle #FP209497DI
★★★★★ ★★★★★
3
(2)
SENCO
Compresseur à air portatif
Format 1GAx0.5HP
Article #10595008
Modèle #PC1010
★★★★★ ★★★★★
3,3
(4)
CAMPBELL HAUSFELD
Compresseur à air électrique « Quiet Series », 8 gal, 1,0 HP
Format 8GAx1HP
Article #73455217
Modèle #DC080500
★★★★★ ★★★★★
5
(2)
CAMPBELL HAUSFELD
Compresseur à air vertical, 60 gallons, 3,7 HP
Format 60GAx3.7HP
Article #73455238
Modèle #XC602100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Compresseur vertical, 80 gal, 5 CV
Format 80GAx5HP
Article #73455239
Modèle #XC802100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Compresseur à air électrique « Quiet Series », 6 gal, 1,0 HP
Format 6GAx1HP
Article #73455216
Modèle #DC060500
★★★★★ ★★★★★
4,8
(4)
ROK
Compresseur d'air ROK avec kit combiné de cloueur Brad 2 po
Article #330721815
Modèle #ROK-10955
★★★★★ ★★★★★
0
(0)
CRISP-AIR
Compresseur Crisp-Air 1,8 HP, 4 gallons, sans huile
Article #330674911
Modèle #CRTS200
★★★★★ ★★★★★
4
(1)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Compresseur à air sur chariot, 4 gal est évalué 3.0 de 5 de 15.
Rated 2 de 5 de par start up I would give this product an Excellent review but for one important thing. The Compressor will not start when temp. is 50 and below. The overload switch keeps coming out. I have this Compressor set up on a timer and with my old unit I never had to go and reset the over load. When the temp is above 50 everything works very good, It keeps air built up good and runs much quilter than my old Compressor. This is my second unit in 10 days and no difference. Has the same problem. I took a long look around and it is not only me, but others have the same problem. The ones that live in Fl. Have no problem. Wonder why?? One of the things dewalt talks about is that the unit has oil lub. for cold starts. There is work to be done to make this unit ok.
Date de publication: 2013-12-31
Rated 5 de 5 de par Excellent Product! Quiet! I have now owned 4 different compressors, 5 including this one. Out of all 5 this has been the best compressor yet! It runs quite a bit quite than all of the others that I have owned and gives great power. I used it primarily for framing houses with an Hitachi Framing nailer and then with some finish nailers. No problems so far!
Date de publication: 2017-03-05
Rated 4 de 5 de par Cold starts This review is to let customers who are complaining about cold starting this compressor. I’ve own this type of compressor for over 25 years. Your problem with cold starts is not the compressor, it’s the amperage in which you are trying to run it from. This compressor to run at peak performance should be plugged in to a 20 amp recepticle. This would be one like your frig, your washer or any other large appliance that has a dedicated circuit installed for it. A typical 15 amp circuit will work if it’s dedicated to only one outlet. It does need more amperage when it’s cold to start. Eliminate extension cords, and circuits that have other items plugged in to it or circuits with other outlets that are on the same circuit. This is a professional tool and it pulls a lot of amps. Especially at start up. Sure it’s a pain sometimes, but it’s something we just have to deal with. You shouldn't buy a heavy duty tool and expect it to function properly when it’s power source is insuficient for that tool! We don’t buy a new car or truck then put water in the gas tank and expect it to start. You are essentially doing the same thing by plugging it in a insufficient power source. So don’t always blame the tool sometimes you need to look at the power source for that to. My 4-star rating is not because of cold start up issues but of the availability of replacement parts. It’s a short list of parts available. That’s especially disturbing for a tool that is still in production.
Date de publication: 2017-12-24
Rated 5 de 5 de par works great So far so good with this compressor. I bought it to replace an old one of a different brand that failed on me. Keeps up great with framing guns, witch to be honest I was a little concerned about but all for nothing..... Very pleased with it and I like the compact design so it doesn't take up allot of room in my trailer. [This review was collected as part of a promotion.]
Date de publication: 2018-11-11
Rated 5 de 5 de par Needed a new compressor. Overall, pleased with my purchase. Definitely a heavy duty setup, easy to use around the house. [This review was collected as part of a promotion.]
Date de publication: 2018-08-14
Rated 1 de 5 de par Inferior product for dewalt I typically only buy dewalt tools. This compressor may change my mind. Less than a year old and I am ready to throw it in the garbage. The rubber boot on the bottom from fell off within the first week. Every bold that holds it together has rattled out several times. Even on a 20 amp circuit, it had issues staring up at times, especially when it is cold outside. Today, welds on the rim broke and the rim fell off of the axle.
Date de publication: 2020-04-21
Rated 4 de 5 de par Heavy Duty Unit 5 years of moderate use and still kicking. Bolts and screws have come loose and ive lost 2/4 now on the top black plate. Upgraded the bolts on the tires for a whopping 4bucks and shes all good. Super well built but its heavy. Great for big to medium size projects as it is absolutely massive and heavy. Only gave it 4 stars cause it could/should have more CFM for a unit of this proportions.
Date de publication: 2019-10-11
Rated 5 de 5 de par Easy Store Gives me all the compressed air that I need and stores easily out of the way [This review was collected as part of a promotion.]
Date de publication: 2018-10-02
  • y_2020, m_6, d_5, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_fr_CA, sid_0027688, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin