Décor d'HalloweenDécorations gonflablesÉclairage et effets spéciaux Décorations d'intérieurDécorations d'extérieur

3/4x4x8 Contreplaqué en pin ACX

Article#0938034 Modèle#PINE34 Format3/4"x4'x8'
3/4x4x8 Contreplaqué en pin ACX
 

Caractéristiques

Le contreplaqué en pin ACX est un matériau de qualité, fait de placages solide et sablé d'un coté. Il est utilisé à l'intérieur comme à l'extérieur comme sous-plancher, projet de bricolage ou travaux de finition tel que la fabrication de meubles, dessus de table ou comptoir.

Vous pourriez aussi aimer

Contreplaqué épinette standard, 1/2" x 4" x 8"
Format 1/2x4'x8'
Article #0938003
Modèle #CP12ES
★★★★★ ★★★★★
5
(1)
Bas Prix
3/4x4x8 Contreplaqué en épinette select
Format 3/4x4'x8'
Article #0938015
Modèle #CP34ESL
★★★★★ ★★★★★
0
(0)
3/8x4x8 Contreplaqué en sapin select
Format 3/8"x4'x8'
Article #0938018
Modèle #CP38SS
★★★★★ ★★★★★
0
(0)
5/8x4x8 Contreplaqué en épinette standard
Format 5/8"x4'x8'
Article #0938004
Modèle #CP58ES
★★★★★ ★★★★★
5
(1)
1/2x2x4 Contreplaqué en sapin, B1C
Format 1/2"x2'x4'
Article #8914028
Modèle #01110204
★★★★★ ★★★★★
0
(0)
Contreplaqué pour balcon, 11/16" x 60" x 96"
Format 17MMx60"x96"
Article #0938039
Modèle #CP111658D
★★★★★ ★★★★★
0
(0)
Contreplaqué pour balcon, 11/16" x 60" x 120"
Format 17MMx60"x120"
Article #0938036
Modèle #CP1116510D
★★★★★ ★★★★★
0
(0)
3/4x4x8 Contreplaqué en sapin select
Format 3/4"x4'x8'
Article #0938022
Modèle #CP34SS
★★★★★ ★★★★★
5
(1)
5/8x4x8 Contreplaqué en sapin select
Format 5/8"x4'x8'
Article #0938020
Modèle #CP58SS
★★★★★ ★★★★★
0
(0)
5/8x4x8 Contreplaqué en épinette standard, embouveté
Format 5/8"x4'x8'
Article #0938005
Modèle #CP58ESE
★★★★★ ★★★★★
0
(0)
1/2x4x4 Contreplaqué en sapin, B1C
Format 1/2"x4'x4'
Article #8914029
Modèle #01110404
★★★★★ ★★★★★
0
(0)
1/2x4x8 Contreplaqué en épinette select
Format 1/2"x4'x8'
Article #0938012
Modèle #CP12ESL
★★★★★ ★★★★★
0
(0)
Contreplaqué traité, 3/4" x 4' x 8'
Format 3/4"x4'x8'
Article #0938028
Modèle #803521501
★★★★★ ★★★★★
0
(0)
3/8x4x8 Contreplaqué en épinette standard
Format 3/8x4'x8'
Article #0938002
Modèle #CP38ES
★★★★★ ★★★★★
0
(0)
5/8x4x8 Contreplaqué en épinette select, embouveté
Format 5/8"x4x8'
Article #0938014
Modèle #CP58ESLE
★★★★★ ★★★★★
0
(0)
Contreplaqué pour balcon, 3/4" x 48" x 96"
Format 17MMx48"x96"
Article #0938038
Modèle #CP111648D
★★★★★ ★★★★★
0
(0)

Spécifications techniques

Composante :Pin Type :Panneau de contreplaqué Style :Sablé Épaisseur :3/4" (1,9 cm) Largeur :4 pi (1,22 m) Longueur :8' (2,44 m) Grade :ACX

will you cut the plywood for me so that I can fit it in to my Jeep ?

Posée par: muddyboots
My Lowe’s has a saw and will cut it.
Répondue par: DanDL
Date de publication: 2019-04-16

There is any chance of cutting the wood. I want length of 6 Feet.

Posée par: sundeep
  • y_2020, m_1, d_17, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_fr_CA, sid_0938034, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
3/4x4x8 Contreplaqué en pin ACX est évalué 4.6 de 5 de 44.
Rated 5 de 5 de par Great Product for Cabinets I'm making cabinets for my shop, and I first started with the traditional 23/32 plywood - until I was getting some MDF and saw this next to it. Even the C side is smoother than either side of traditional BC plywood. Since I'm painting the cabinets on the outside and varnishing the inside, I put the A side to the inside and fill any knotholes on the outside. Not only does this material take less sanding, I've found the sheets to have very little bow in them and fewer voids than traditional. When you add these benefits to a cost that's less than either traditional plywood and MDF, I saw you can't beat it.
Date de publication: 2017-08-08
Rated 5 de 5 de par The product I purchased was 4x8, why are you showing 3x8 at all? I am happy with my purchase, but would not entertain 3x8 unless the was a specific requirement for it.
Date de publication: 2017-08-24
Rated 4 de 5 de par A true A/C plywood This is a true A/C plywood product. Some pieces will have a better C side than others. If you have a project that you will be painting or covering with laminate, this will work for you.
Date de publication: 2016-02-08
Rated 5 de 5 de par Plywood flooring project We are building a house and we looked for an economical way to do a wood floor. This plywood was perfect. We lightly sanded the good side, ran a torch across it to bring out the grain, then cut into 4 door by 5 3/4 inch strips. Glued and nailed the strips down, stained and polyurethane. It is turning out great. I had no problems with the quality. Great product.
Date de publication: 2017-05-06
Rated 4 de 5 de par Great Plywood (depending...) I bought 85 sheets to redo my barn floor and am planning on cutting tongues/grooves into the edges and floating the floor. I am planning on staining and 2-part epoxying the floor. Given the application (staining), I need sheets without putty and the repair "footballs." I got 3 skids, and the "A" sides were a mixed bag. One skid had next to no repairs and the other two skids had approximately 25% to 33% sheets showing repairs (putty or footballs). To me, if you're going to sell AC grade plywood, why not just make it repair free? So if you're looking for a finished application with staining, just make sure you take a good look at the sheets you buy. [This review was collected as part of a promotion.]
Date de publication: 2019-02-26
Rated 5 de 5 de par very nice I bought 2 sheets yesterday I was very impressed .When i cut the sheet there was little to no voids. Very solid plywood should work out nice . to bad we cant make a plywood like this in the USA. The price is worth it Lot less puddying and sanding .
Date de publication: 2011-11-20
Rated 5 de 5 de par Little to no voids so far I have broken down three sheets to make base cabinet's, little to no voids, the ones or two I did find were very small. Will definitely buy again.
Date de publication: 2017-02-27
Rated 5 de 5 de par I would build a boat with this stuff! The last piece of Georgia Pacific Plytainium Plywood was such a piece of garbage that I felt this was worth the extra price. I purchased this to build a box for a Harbor Freight 4X8 Trailer. This required no finishing prior to painting and it look beautiful with John Deere Green generic mixed Acrylic latex house paint. The painted edges are exposed to the weather and show no signs of absorbing water.
Date de publication: 2017-08-31
  • y_2020, m_1, d_17, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_44
  • loc_fr_CA, sid_0938034, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin