Détecteur de montant StudSensor L50, jaune

Article#68855010 Modèle#66995
Détecteur de montant StudSensor L50, jaune
 

Caractéristiques

Ce détecteur de montants StudSensor(MC) L50 de Zircon est parfait pour tous vos projets d'installation et de rénovation. Avec son design ergonomique breveté, il offre une prise facile et sécuritaire dans une main ou l'autre, dans tous les angles. Il indique clairement le bord de montants et de solives derrière les murs, les planchers et les plafonds grâce à son affichage facile à consulter et son pointeur SpotLite(MD). Le détecteur WireWarning(MD) indique la présence de voltage sous tension jusqu'à 2" de profondeur. Le mode StudScan localise les bords de montants ou de solives en bois ou en métal dans un mur jusqu'à un maximum de 1 1/2" et le mode DeepScan(MD) augmente la profondeur du balayage jusqu'à un maximum de 1 1/2". La fente en V permet de marquer facilement l'emplacement exact des montants et la lumière « READY » permet d/avertir lorsque le calibrage a été effectué avec succès. Ce produit est couvert par une garantie d'un an.

Vous pourriez aussi aimer

CRAFTSMAN
Ruban à mesurer classique, 1'' x 16', chrome
Format 1"x16'
Article #00276614
Modèle #CMHT37316S
★★★★★ ★★★★★
4,6
(13)
CRAFTSMAN
Ruban à mesurer, PRO-LOCK, 1,25'' X 16', noir/rouge
Format 1.25"x16'
Article #00276615
Modèle #CMHT37716S
★★★★★ ★★★★★
4,3
(6)
CRAFTSMAN
Ruban à mesurer PRO-13, 1,25'' x 35'', magnétique
Format 1.25"x35'
Article #00276616
Modèle #CMHT37835S
★★★★★ ★★★★★
4,4
(61)
CRAFTSMAN
Ruban à mesurer PRO-10, 1,25'' X 25', rouge
Format 1.25"x25'
Article #00276618
Modèle #CMHT37425LW
★★★★★ ★★★★★
4,8
(41)
CRAFTSMAN
Ruban à mesurer PRO-10, 1,25'' x 16', rouge
Format 1.25"x16'
Article #00276619
Modèle #CMHT37416S
★★★★★ ★★★★★
4,6
(7)
CRAFTSMAN
Ruban à mesurer PRO-10, 1,25'' X 30', noir et rouge
Format 1.25"x30'
Article #00276620
Modèle #CMHT37430S
★★★★★ ★★★★★
4
(4)
JOHNSON
AIGUISOIR À CRAYON
Article #54455003
Modèle #40-0668
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Niveau à caisson de 24", 1 poignée, rouge et noir
Format 24"
Article #00276923
Modèle #CMHT82346
★★★★★ ★★★★★
4,7
(31)
BOSCH
Mire de nivellement télescopique en aluminium
Article #330609660
Modèle #GR500
★★★★★ ★★★★★
4
(1)
JOHNSON
NIVEAU
Format 72"
Article #54455004
Modèle #40-0143
★★★★★ ★★★★★
0
(0)
JOHNSON
CORDEAU 250 PI.
Format 250'
Article #07045021
Modèle #40-0818
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Niveau en I de 24", fioles 360°, aluminium, rouge et noir
Format 24"
Article #00276924
Modèle #CMHT82344
★★★★★ ★★★★★
4,9
(32)
BOSCH
Laser d'alignement des carreaux muraux et d'équerrage, 65'
Article #19835443
Modèle #GTL3
★★★★★ ★★★★★
5
(1)
JOHNSON
NIVEAU
Format 48"
Article #07045039
Modèle #40-2090
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Niveau en I de 48", fioles 360°, aluminium, rouge et noir
Format 48"
Article #00276925
Modèle #CMHT82345
★★★★★ ★★★★★
4,4
(31)
CRAFTSMAN
Mesureur de distance au laser, de poche, 40'
Format 40'
Article #00276742
Modèle #CMHT77637
★★★★★ ★★★★★
3,8
(78)

Spécifications techniques

Couleur :Jaune Type :Détecteur de montant Modèle :StudSensor L50 Utilisations :Montants, solives et voltage sous tension Profondeur :Jusqu'à 1 1/2" (38 mm) Garantie :Garantie 1 an
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Détecteur de montant StudSensor L50, jaune est évalué 3.9 de 5 de 369.
Rated 4 de 5 de par Just finished hanging my tv I read the 5 star rating of the stanley $10 stud finder and decided to give it a try. It kept giving me false stud readings. I'm sure that the walls aren't completely made of studs so I returned it and picked up this model so I can see when I am approaching a stud. I couldn't get a beep but I noticed that it started to detect then loose it after I pass the area. I decided to mark the place where the signal was it highest even though it didn't beep and when the bar went down. I did a test drill and hit a stud. I also noticed that the drywall was extremely thick so I set it on deepscan mode and it worked from there. Not exact as the readings varied every time put I managed.
Date de publication: 2011-10-23
Rated 4 de 5 de par Good Purchase Needed a stud finder in a pinch to put a projector on the ceiling. At first I thought it was a bad stud finder, found these reviews and was disappointed that I didnt check before I bought. After attempting several times and not able to find the studs, my wife suggested maybe the ceiling studs were the opposite direction. Jokingly I scanned that way and whaddya know the stud finder found them. After a couple of test holes, I verified that the finder was actually working correctly. The lines were even semi-accurately showing edges of my metal studs. Overall good product.
Date de publication: 2011-10-23
Rated 5 de 5 de par Works Great As a professional handyman, I've used it many times since I purchased it, and I think it's the best balance between accuracy, ease of use, and price. It shows the edges of the studs and the center, so there's no guesswork. It will also alert if it detects an electrical current. It even has a normal scan mode and a deep scan mode. In my experience, it has been completely reliable, and I'm very pleased with it.
Date de publication: 2016-08-20
Rated 1 de 5 de par Absolutely worthless Lets start by saying that don't buy this product. Don't let your friends or family buy this product. It is a worthless piece of junk. I followed the directions to the letter and it cannot find a same stud at the same location in a repeatable manner. One time it shows I am on the edge of the stud I move it off and try it again and it shows the edge of the stud has moved 1/2 of a inch. I try it again and it shows the edge of the stud somewhere else again. This is right out of the box with a brand new fresh battery. I tried it with stud scan mode and deep scan mode, same results. I tried it on sheetrock and in a shower on top of tile. same erratic results. Don't waste your money on this product!
Date de publication: 2016-07-14
Rated 5 de 5 de par Works Perfectly Well I read lots of reviews of various stud finders, lots of reports says "did not work ". Mine worked fine. I think people may be missing a simple step when they use the stud finders. Calibrate! So simple with this unit and I would guess almost any stud finder. Hold the unit flat against the wall and press and hold the button. The unit will buzz and flash a red light for just a second and it will read "Ready" in the corner of the display. The unit is now "Calibrated" and ready to find studs. It only took 5 seconds! If you release the button you must recalibrate it but no big deal, it's fast to do. You must continue with the button held down. Slowly cross the wall until the red light arrow points and mark that point. Continue till the red light goes off. Mark that point and in between the two marks will be the center of the stud. If you can't get a red arrow to light up try the "Deep Scan" setting. Oh, and be sure to use a good battery.
Date de publication: 2015-05-23
Rated 5 de 5 de par Great product, Easy to Read and easy to use. Easy to use, locates the studs quickly, no need to wear your glasses, it projects an arrow on the wall when it locates the edge of the stud, mark the wall, then scan across the other edge of the stud, mark it on the wall; the area between the two marks (projected arrows) is the middle of the stud. It flashes a warning when the sensor picks up live voltage. The StudSensor e50 is a inexpensive tool that needs to be in every toolbox.
Date de publication: 2013-12-02
Rated 4 de 5 de par A needed upgrade I was in a need for a working stud finder. I had bought the cheapest model and used it for a few years. Finally I gave up and bought this StudSensor e50 Stud Finder. It is so much better! Easy to use and pretty accurate! The visual display makes it very intuitive. I have already used it to hang pictures, shelving and a bike rack.
Date de publication: 2013-08-11
Rated 1 de 5 de par WORST PURCHASE EVER I read the reviews & was a bit skeptical of some of the negative posts. Bought the unit any way. Should have trusted the bad posts. Tried to find studs on walls of recently finished dry wall. On a 28 ft long wall it found about 3 studs. The rest of the time it either totally missed the stud or beeped like my studs are the entire width. I had more accuracy just guessing based upon knowing what was behind the dry wall. Wasted my time for 2 trips to the store to make the purchase and to return the unit and wasting my time trying to use the piece of junk. I really don't see how this thing would function correctly for any one.
Date de publication: 2012-09-09
  • y_2020, m_2, d_20, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_369
  • loc_fr_CA, sid_68855010, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 21ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin