Obtenez 200 milles AIR MILES^md en prime avec le code promo 1636. Détail

Get 200 AIR MILES® Bonus Miles with the promo code 1636.Detail

L'article sera livré en bordure de trottoir en raison des restrictions de poids

Item will be delivered curbside due to weight restrictions

Nos magasins sont ouverts pour répondre à vos besoins essentiels. Voir les restrictions COVID. Détail

DEWALT

Compresseur à air sur chariot, 4 gal

N° d'article 0027688 N° de modèle D55154 Format4Gx1.1HP

DEWALT

Compresseur à air sur chariot, 4 gal

N° d'article 0027688 N° de modèle D55154 Format4Gx1.1HP

Obtenez 200 milles AIR MILES^md en prime avec le code promo 1636. Détail

Get 200 AIR MILES® Bonus Miles with the promo code 1636.Detail

L'article sera livré en bordure de trottoir en raison des restrictions de poids

Item will be delivered curbside due to weight restrictions

Nos magasins sont ouverts pour répondre à vos besoins essentiels. Voir les restrictions COVID. Détail

Caractéristiques

Le compresseur électrique Dewalt D55154 est muni de deux roues pneumatiques de 10" et d'une poignée qui lui confèrent une grande mobilité et une facilité de transport. La pompe lubrifiée à l'huile et le cylindre en fonte améliorent la durabilité de ce compresseur, alors que le régulateur à haut débit d'air lui assure une performance accrue et une reprise rapide. Cet outil comprend un drain avec clapet à bille et une plaque supérieure qui sert de chariot pour aider à transporter des articles.

Spécifications techniques

Garantie :Garantie d''un an, contrat de service gratuit d'un an, garantie de remboursement de 30 jours Débit d'air :3.8; 4,[email protected]; [email protected], [email protected] Capacité du réservoir :4 gal HP en continu :1,1 CV

Produits fréquemment achetés ensemble

YELLOW JACKET

Adaptateur pour protection DDFT portative, 1800 W, 15 A

N° d'article 32045050

N° de modèle 14650013-6

★★★★★ ★★★★★

(0)

YELLOW JACKET

Lisière à 6 prises, protection contre surtensions, 6', jaune

Format 1.8M

N° d'article 32045053

Cordon de rallonge électrique, 12/3, 25', rouge

Format 12/3 25'

N° d'article 74045239

N° de modèle 1697SW0002

★★★★★ ★★★★★

(0)

Vous pourriez aussi aimer

MAKITA

Compresseur à air 1 gal, sans huile, 1 hp

Format 1.0HP

N° d'article 11975397

Ensemble compresseur 2 hp et cloueuse, 4 pièces

Format 2HPx5/8-2"x18CA

N° d'article 11975374

N° de modèle MAC700-KIT3

Compresseur à air à l'huile

Format 4.2GAx2.5HP

N° d'article 11975242

Compresseur 2HP de 6 gallons et cloueuse Calibre 18

Format 6GAx2HP

N° d'article 10645001

N° de modèle BTFP1KIT-CA

Compresseur à air électrique, 1 gal, 0,5 CV

Format 1GAx0.5HP

N° d'article 37815185

Compresseur, cloueuse et agrafeuse en acier jaune et noir

N° d'article 02775157

N° de modèle BTFP3KIT-CA

Compresseur à air Metabo HPT jumeau superposé, portatif, 4 gallons

Format 4GA

N° d'article 37815229

Compresseur sans huile, 6 gallons, 150 lb/po², rouge et noir

Format 6GA

N° d'article 00277116

N° de modèle CMEC6150

Compresseur à air Metabo HPT, 6 gal, 150 lb/po², vert et noir

Format 6GAx150PSI CA18

N° d'article 37815227

N° de modèle KNT50ACM

★★★★★ ★★★★★

(1)

CAMPBELL HAUSFELD

Compresseur vertical Campbell Hausfeld, 80 gallons, 5 hp

Format 80GAx5HP

N° d'article 73455239

N° de modèle XC802100

★★★★★ ★★★★★

(0)

CAMPBELL HAUSFELD

Compresseur à air électrique « Quiet Series », 6 gal, 1,0 HP

Format 6GAx1HP

N° d'article 73455216

N° de modèle DC060500

Compresseur à air portatif

Format 1GAx0.5HP

N° d'article 10595008

Compresseur à air vertical Campbell Hausfeld, 60 gallons, 3,7 hp

Format 60GAx3.7HP

N° d'article 73455238

N° de modèle XC602100

★★★★★ ★★★★★

(0)

CAMPBELL HAUSFELD

Compresseur à air électrique « Quiet Series », 8 gal, 1,0 HP

Format 8GAx1HP

N° d'article 73455217

N° de modèle DC080500

★★★★★ ★★★★★

(5)

CAMPBELL HAUSFELD

Ensemble de compresseur 3 gallons et cloueuse

Format 3GA

N° d'article 20185001

N° de modèle FP209497DI

Compresseur Crisp-Air 1,8 HP, 4 gallons, sans huile

N° d'article 330674911

Compresseur d'air ROK avec kit combiné de cloueur Brad 2 po

N° d'article 330721815

N° de modèle ROK-10955

★★★★★ ★★★★★

(0)

Compresseur à air sur chariot, 4 gal est évalué 2.7 de 5 de 24.

Rated 2 de 5 de Wilbur par start up I would give this product an Excellent review but for one important thing. The Compressor will not start when temp. is 50 and below. The overload switch keeps coming out. I have this Compressor set up on a timer and with my old unit I never had to go and reset the over load. When the temp is above 50 everything works very good, It keeps air built up good and runs much quilter than my old Compressor. This is my second unit in 10 days and no difference. Has the same problem. I took a long look around and it is not only me, but others have the same problem. The ones that live in Fl. Have no problem. Wonder why?? One of the things dewalt talks about is that the unit has oil lub. for cold starts. There is work to be done to make this unit ok.

Date de publication: 2013-12-31

Rated 5 de 5 de iPat par work horse I have had this for. few years now, at least 5. it get lugged around, sits outside for weeks, never added any more oil, just plug in and go. every-time. I did nothing to maintain this and its still going strong. only this year the nuts and bolts started falling off. Ill be sorting that out soon and will change the oil. yes there is still lots, I don't know how because it would go for hours none stop, 2 guns and leaky hoses. you will run out of air if ur going fast while sheeting. but thats normal with a rig this size. all in all. It has worked out perfect for me. it is heavy but u can manage it on your own. Just not pulling up on scaffold.

Date de publication: 2020-10-03

Rated 5 de 5 de Tfd par Excellent Product! Quiet! I have now owned 4 different compressors, 5 including this one. Out of all 5 this has been the best compressor yet! It runs quite a bit quite than all of the others that I have owned and gives great power. I used it primarily for framing houses with an Hitachi Framing nailer and then with some finish nailers. No problems so far!

Date de publication: 2017-03-05

Rated 5 de 5 de John par works great [This review was collected as part of a promotion.] So far so good with this compressor. I bought it to replace an old one of a different brand that failed on me. Keeps up great with framing guns, witch to be honest I was a little concerned about but all for nothing..... Very pleased with it and I like the compact design so it doesn't take up allot of room in my trailer.

Date de publication: 2018-11-11

Rated 4 de 5 de TrimGuy par Cold starts This review is to let customers who are complaining about cold starting this compressor. I’ve own this type of compressor for over 25 years. Your problem with cold starts is not the compressor, it’s the amperage in which you are trying to run it from. This compressor to run at peak performance should be plugged in to a 20 amp recepticle. This would be one like your frig, your washer or any other large appliance that has a dedicated circuit installed for it. A typical 15 amp circuit will work if it’s dedicated to only one outlet. It does need more amperage when it’s cold to start. Eliminate extension cords, and circuits that have other items plugged in to it or circuits with other outlets that are on the same circuit. This is a professional tool and it pulls a lot of amps. Especially at start up. Sure it’s a pain sometimes, but it’s something we just have to deal with. You shouldn't buy a heavy duty tool and expect it to function properly when it’s power source is insuficient for that tool! We don’t buy a new car or truck then put water in the gas tank and expect it to start. You are essentially doing the same thing by plugging it in a insufficient power source. So don’t always blame the tool sometimes you need to look at the power source for that to. My 4-star rating is not because of cold start up issues but of the availability of replacement parts. It’s a short list of parts available. That’s especially disturbing for a tool that is still in production.

Date de publication: 2017-12-24

Rated 1 de 5 de Greg par After my eight day on the job site, it will not build pressure over 60 psi. Second dewalt compressor I’ve had problems with. My dual tank hitachi is 10x more durable. My Makita compressor is 3 years old and still running like new and much quieter. No more dewalt compressors for me.

Date de publication: 2020-06-28

Rated 5 de 5 de RD par Needed a new compressor. [This review was collected as part of a promotion.] Overall, pleased with my purchase. Definitely a heavy duty setup, easy to use around the house.

Date de publication: 2018-08-14

Rated 1 de 5 de Craig par Inferior product for dewalt I typically only buy dewalt tools. This compressor may change my mind. Less than a year old and I am ready to throw it in the garbage. The rubber boot on the bottom from fell off within the first week. Every bold that holds it together has rattled out several times. Even on a 20 amp circuit, it had issues staring up at times, especially when it is cold outside. Today, welds on the rim broke and the rim fell off of the axle.

Date de publication: 2020-04-21

Compresseur à air sur chariot, 4 gal Avis - page 2

Compresseur à air sur chariot, 4 gal

Compresseur à air sur chariot, 4 gal

Caractéristiques

Spécifications techniques

Produits fréquemment achetés ensemble

Vous pourriez aussi aimer

Changement de magasin