Décor d'HalloweenDécorations gonflablesÉclairage et effets spéciaux Décorations d'intérieurDécorations d'extérieur

Lame de scie circulaire au carbure, 60 DT, 7 1/4"

Article#00277171 Modèle#DWA171460B10 Format7 1/4"
Lame de scie circulaire au carbure, 60 DT, 7 1/4"
 

Caractéristiques

Ces lames de scie 7 1/4" de marque DeWalt sont conçues pour les travaux précis de finition. Les dents des lames disposent de la conception ToughTrack qui fournit des coupes droites et précises. Les fentes brevetées permettent de réduire les vibrations lors de l'utilisation, tandis que les dents en carbure de tungstène haute densité sont dotées d'une durabilité supérieure. L'épaulement renforcé offre une résistance aux impacts de clou, sans compter que les lame sont équipées d'un revêtement antiadhésif ToughCoat qui réduit grandement le frottement et le gommage. Elle peuvent aussi bien être utilisées avec les scies circulaires à cordon et que les scies circulaires sans fil. Satisfaction garantie 30 jours.

Vous pourriez aussi aimer

METABO HPT
Ensemble de lames de scie circulaire, 10", carbure, 3/PQT
Format 10"xPK3
Article #37815174
Modèle #115166DM
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame de scie circulaire au carbure, mélamine, 100 DT, 10"
Format 10"x100DT
Article #34595869
Modèle #1014612
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame de scie circulaire en carbure pour métal, 7 ¼ po, 32 DT
Format 7 1/4"x32DT
Article #81735146
Modèle #1017302
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame de scie au carbure pour la mélamine, 7 po, 40 DT
Format 7"x40DT
Article #3459023
Modèle #1014352
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame de scie circulaire « Dent de rasoir », 10 po, 80 dents
Format 10"x80DT
Article #09065006
Modèle #1019512
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame de finition « verte » en carbure, 7/14 po, 40 DT
Format 7 1/4"x40DT
Article #34595762
Modèle #1110072
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame en carbure pour scie circulaire, 24 dents, 5 3/8"
Format 5 3/8"x24DT
Article #34595858
Modèle #1110012
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame de scie circulaire Exchange-A-Blade, carbure, 12", 100 DT
Format 12"x100DT
Article #34596019
Modèle #1019442
★★★★★ ★★★★★
0
(0)
WORKBENCH
Meule Boisseau diamant segmentée à 2 rangs, 4 1/2 po
Article #330677772
Modèle #120479
★★★★★ ★★★★★
4
(1)
DEWALT
Lame de scie circulaire DeWalt au carbure, 18 DT, 6 1/2"
Format 6 1/2"
Article #00277168
Modèle #DWA161218
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Lame de scie en carbure, 10", 24 DT
Format 10"x24DT
Article #00276813
Modèle #CMAS21024
★★★★★ ★★★★★
4,8
(14)
eco
EXCHANGE-A-BLADE
Lame de scie circulaire « Dent de rasoir », 12 po, 100 dents
Format 12"x100DT
Article #09065007
Modèle #1019522
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame de scie au carbure pour la mélamine, 10 po, 60 DT
Format 10"x60DT
Article #3459028
Modèle #1014852
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame de scie au carbure « Razor Back », 7 1/4 po, 40 DT
Format 7 1/4"x40DT
Article #34595010
Modèle #1016442
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lame de finition « verte » en carbure, 10 po, 60 DT
Format 10"x60DT
Article #34595763
Modèle #1110152
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Lames « vertes » en carbure, 6 1/2", paquet de 2
Format 6 1/2"x24-36DTx2MX
Article #34595863
Modèle #2500013
★★★★★ ★★★★★
0
(0)

Spécifications techniques

Composante :Carbure Type :60 dents Couleur :Jaune Utilisations :Finition ultra fine Diamètre :7,25" Diamètre de l'arbre :5/8" (1,59 cm) Emballage :1 unit
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Lame de scie circulaire au carbure, 60 DT, 7 1/4" est évalué 4.7 de 5 de 29.
Rated 5 de 5 de par Excellent for Plywood Just cut out a bunch of plywood shelf tops with this saw blade and it cut perfectly. I had 3/4” plywood with an oak veneer and the edges are seamless. I would highly recommend this blade to make a finishing cut- especially plywood. [This review was collected as part of a promotion.]
Date de publication: 2019-05-05
Rated 5 de 5 de par Outstanding performance My team uses saws all day every day. They were diehard Diablo fans until I bought a couple of these blades. Immediately they noticed a difference and have asked that this be our exclusive blade brand. Great job Dewalt! [This review was collected as part of a promotion.]
Date de publication: 2019-07-28
Rated 5 de 5 de par Super Smooth Cut on MDF Melamine Laminate Shelf I needed to make a super clean cut a 1 inch thick MDF shelf which was covered with a laminate surface. After reading many reviews I settled on the DeWALT 60 Tooth blade which I installed on my ye olde Craftsman circular saw. What an amazing blade! Went through the MDF like butter and left a clean edge on the laminate. If you're going to use this blade with a laminate like mine I recommend that you: 1) Remember to put the finished side facing DOWN when you make your cut; 2) Think about using tape or something to protect the laminate surface from scratches while it is facing down; 3) Support the board you are cutting on both ends - if you don't the weight of the waste end will likely drop and cause the board and laminate to crack before your through the entire cut. 4) Make a couple test cuts on some scrap material to get used to how quickly this blade moves and to see if you're happy with the result. Would I recommend this blade? Absolutely YES. Unlike some reviews, I had no issue with transfer of the yellow paint on the blade to the board I was cutting. [This review was collected as part of a promotion.]
Date de publication: 2019-08-16
Rated 5 de 5 de par Hardwood floor. I needed to cut a perfectly smooth line in my red oak floor. This cut soooo smoothly ... like butter! [This review was collected as part of a promotion.]
Date de publication: 2019-08-22
Rated 5 de 5 de par Great blade Great blade for finer cuts. Still has decent cut speed even with 60 teeth [This review was collected as part of a promotion.]
Date de publication: 2019-07-18
Rated 2 de 5 de par Broken teeth I’m not so sure about this blade, after a couple of weeks use I was cutting a piece of mahogany and it broke two teeth off of the blade. Mahogany is not that hard of a wood and it should have stood up to it with no problem. [This review was collected as part of a promotion.]
Date de publication: 2019-09-06
Rated 5 de 5 de par works perfect, never had such a great cutting saw I've owned numerous circular saws in my almost 70 years of life, but none have worked as well as this one. You can feel the power of it immediately, the durability of it is obvious in the weight and strength in its construction. When cutting it never hesitated or even bucked once in use. When it's time to replace more tools, they're all being replaced by Dewalt brand tools. Not to mention it was an awesome price and great value. [This review was collected as part of a promotion.]
Date de publication: 2019-11-13
Rated 5 de 5 de par Did the Job Bought it to rip a piece of 8 foot butcher block. Cut was clean and easy. Left minimal saw marks that were easily sanded away. [This review was collected as part of a promotion.]
Date de publication: 2019-08-26
  • y_2020, m_1, d_19, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_fr_CA, sid_00277171, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin