Électrode E6011, Fleetweld 180 de Lincoln Electric, 1/8 po, 5 lb

N° d'article 330734761 N° de modèle ED030563
Électrode E6011, Fleetweld 180 de Lincoln Electric, 1/8 po, 5 lb
 

Caractéristiques

Ces électrodes E6011 de 1/8-in de Lincoln Electric sont offerts dans une boîte de 5 lb.

  • Pénétration profonde.
  • Excellent pour le soudage de tôles sur les joints bout à bout et avec bords relevés.
  • Idéal pour une utilisation sur de l'acier peint sale ou huileux
  • Idéal pour la réparation de machinerie lourde (p. ex. équipements agricoles).

Spécifications techniques

Classification AWS :6011 Type :Électrode enrobée Position :Toutes les positions Type d'emballage :Boîte Diamètre des électrodes :1/8 po Poids de l'emballage d'électrodes de soudage :5 lb

Vous pourriez aussi aimer

BERNZOMATIC
Bouteilles de propane, 16 oz, paquet de 2
Format 16OZxPK2
N° d'article 12135005
N° de modèle 345330
★★★★★ ★★★★★
4,3
(8)
BERNZOMATIC
Propane
Format 14.1OZ
N° d'article 1213011
N° de modèle 345326
★★★★★ ★★★★★
0
(0)
BERNZOMATIC
Ensemble de chalumeau au propane multifonction, 14,1 oz
Format 14.1OZx2MX
N° d'article 18745031
N° de modèle 361480
★★★★★ ★★★★★
4
(54)
BERNZOMATIC
COMBUSTIBLE «MAP-PRO» 14.1 OZ
Format 14.1OZ
N° d'article 12135004
N° de modèle 345329
★★★★★ ★★★★★
0
(0)
BERNZOMATIC
ENS. CHALUMEAU
Format 14.1OZx2MX
N° d'article 12135011
N° de modèle UL100
★★★★★ ★★★★★
1
(1)
BERNZOMATIC
Bouteille de propane Bernzomatic, 16 oz, vert
Format 16OZ
N° d'article 1213012
N° de modèle 345327
★★★★★ ★★★★★
4,2
(5)
BERNZOMATIC
ENS. CHALUMEAU
Format 14.1OZx2MX
N° d'article 12135009
N° de modèle 361485
★★★★★ ★★★★★
5
(1)
OATEY
Ensemble soudure argent
Format 113GR
N° d'article 1120099
N° de modèle 48318
★★★★★ ★★★★★
1
(1)
BERNZOMATIC
Tête de chalumeau, laiton, noir
N° d'article 18745033
N° de modèle 361519
★★★★★ ★★★★★
2,8
(20)
BERNZOMATIC
Tête de chalumeau, laiton, noir
N° d'article 18745000
N° de modèle 361530
★★★★★ ★★★★★
4,7
(57)
OATEY
Soudure argenté
Format 113GR
N° d'article 1120073
N° de modèle 48312
★★★★★ ★★★★★
0
(0)
OATEY
Soudure argenté
Format 1LB
N° d'article 1120120
N° de modèle 290251
★★★★★ ★★★★★
0
(0)
OATEY
Soudure argenté
Format 227GR
N° d'article 1120033
N° de modèle 29024
★★★★★ ★★★★★
0
(0)
OATEY
Pâte à souder sans plomb n° 5, 1,7 oz
Format #5x1.7OZ
N° d'article 11205261
N° de modèle 48393
★★★★★ ★★★★★
0
(0)
OATEY
Métal d'apport en fil 95/5 sans plomb
Format 250GRx95/5
N° d'article 1120032
N° de modèle 22004
★★★★★ ★★★★★
0
(0)
WELLER
Ensemble pistolet à souder, 100/140 W, orange et noir
Format 100/140W
N° d'article 01855498
N° de modèle 9400PKS
★★★★★ ★★★★★
4,2
(53)
BERNZOMATIC
Chalumeau à flamme effilée Bernzomatic en laiton
N° d'article 0149059
N° de modèle 361540
★★★★★ ★★★★★
2,3
(4)
OATEY
Fil pour soudure
Format 1LBx50/50
N° d'article 1120031
N° de modèle 20015
★★★★★ ★★★★★
0
(0)
BERNZOMATIC
Ensemble de chalumeau Bernzomatic Max Heat
Format 14.1OZ
N° d'article 18745001
N° de modèle 361494
★★★★★ ★★★★★
0
(0)
OATEY
Métal d'apport en fil en colophane d'Oatey, gris argenté, métal, intervalle de fusion située entre 361 à 460 °F
Format 227GRx60/40
N° d'article 1120075
N° de modèle 48317
★★★★★ ★★★★★
0
(0)
OATEY
Fil pour soudure
Format 227GRx50/50
N° d'article 1120119
N° de modèle 50192
★★★★★ ★★★★★
0
(0)
OATEY
Soudure
Format 1LBx95/5
N° d'article 1120028
N° de modèle 220181
★★★★★ ★★★★★
0
(0)
OATEY
Flux d'avivage sans plomb n° 95, 1,7 oz
Format #95x48GR
N° d'article 11205285
N° de modèle 48394
★★★★★ ★★★★★
3
(3)
OATEY
Soudure
Format 113GRx40/60
N° d'article 1120070
N° de modèle 48305
★★★★★ ★★★★★
0
(0)
OATEY
Soudure
Format 227GRx40/60
N° d'article 1120122
N° de modèle 50193
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Électrode E6011, Fleetweld 180 de Lincoln Electric, 1/8 po, 5 lb est évalué 4.6 de 5 de 21.
Rated 5 de 5 de par Great fix-all rod 6011's are the cousin of 6010's. However, 6010's only run on DC current, where 6011's can run on both AC and DC. These 6011's are the go-to electrodes if all you own is a Lincoln AC-225 "buzzbox" type welder. 6011's are excellent for welding on steel that you can't get too clean. It will burn through light rust, dirt, grease and some residual paints. One should ALWAYS strive to clean the metal surface "shiny clean" PRIOR to welding. However, sometimes that is just not possible and that's where 6011's come in. 6010's and 6011's are also the "King" rods for deep penetration. Many people use these 6011's for the first or "root" pass, followed by the less penetrating but superior strength-held 7018's. If you have a repair job and/or a "dirty" surface with more contaminants than usual, these will do the job. 6010/6011's don't have a "beautiful" appearance, but it is a strong weld that really bites/burns into mild steel and thicker steel plate. Run these at about 85-90 Amps for starters and finely adjust from there. Use what's known as a "whip and pause" motion. YouTube that to learn more.
Date de publication: 2013-12-20
Rated 4 de 5 de par Good for Ac welder This is the first pack of rods that I have used with an ac welder and they work great for both ac and dc welding. I put a hitch on the back of my lawn mower with them.
Date de publication: 2015-04-06
Rated 5 de 5 de par Lincoln 6011 3/32" welding rods [This review was collected as part of a promotion.] Only wanted a pound, since I didn't think I'd go through that much, but the store only had the 5# box. That said, I have an easier time putting down a good weld with these than I do with some 6013 5/64" rod. This is with a 95amp Craftsman (made by Forney) arc welder. Using it to weld 1/4" steel plate, with the welder at 95amps. I did grind the groove where the plates met so that I was sure it had penetration. The box is paper, so I'll need to protect the rods somehow.
Date de publication: 2019-09-25
Rated 3 de 5 de par Good for the money Well i have to say that these rods worked good for what i needed them for. Overall they did a good job. They burn a little dirty but for the money they worked great
Date de publication: 2014-06-01
Rated 5 de 5 de par Better Than Most Recently, if not going to a welding supply store, I've been getting alot of rods with damaged flux and even bent within the packaging. This one was good. There's not much to say about 6011 rods, but this was noticeably better with regard to condition at time of purchase.
Date de publication: 2017-08-21
Rated 5 de 5 de par Reliable 6011 sticks. [This review was collected as part of a promotion.] The 6011 3/32 sticks stuck easy and burn smooth. Great sticks for dc welding.
Date de publication: 2019-12-18
Rated 5 de 5 de par E6011 welding rods I was lucky you are usually out of stock, you has only two and got both. Lucky I had to come in to get a tree. Lincoln welding rods are the only good rod there is. Off brands either sticks or bad slag. (don't change brands)
Date de publication: 2016-02-21
Rated 5 de 5 de par Great D.C. Welding Rod- you won't be disappointed This 6011 welding rod works great. Comparable to 6010 which is AC only you get the same penetration and just as good if not better weld and certainly easier. This is my go to rod on clean metal and for more contaminated metal I used Lincoln 6013 however the penetration is less. So if you are loooking for a smooth arc and easy to weld electrode stick this is your guy. If you have AC only don't bother but I think you can use it on AC but 6010 is probably better.
Date de publication: 2017-03-11
  • y_2023, m_3, d_24, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_fr_CA, sid_330734761, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin