Ensemble d'agrafeuse pneumatique Arrow, couronne de 3/8 po, calibre 18, recharge rapide, gâchette Bump-Fire

N° d'article 00125088 N° de modèle PT50
Ensemble d'agrafeuse pneumatique Arrow, couronne de 3/8 po, calibre 18, recharge rapide, gâchette Bump-Fire
 

Caractéristiques

Utilisez ce pistolet-agrafeur Arrow pour agrafer des magazines et plusieurs autres projets de bricolage. Sa conception légère et sa poignée en caoutchouc permettent une prise facile. Cette agrafeuse pneumatique mesure 10 po de longueur x 2,4 po de largeur x 7,5 po de hauteur. Elle est dotée d'un chargeur à bouton ultra pratique.

  • Contrairement à d'autres outils pneumatiques, le PT50 ne nécessite pas d'huile pour l'entretien
  • Parfait pour les projets lourds ou les travaux de construction tels que la toiture, l'installation de tapis et de revêtements de sol, la fabrication de meubles, l'installation de plinthes, de moulures et de garnitures de sol
  • Conception compacte et légère
  • La sécurité de contact empêche les tirs accidentels
  • Fonctionne avec les agrafes T50 - 1/4, 5/16, 3/8, 1/2, 17/32, 9/16 po
  • Largeur de la couronne 3/8 po
  • Gâchette à percussion pour un tir rapide
  • Chargement facile, par le bas, pour un rechargement rapide
  • Comprend 3 clés hexagonales

Spécifications techniques

Boîtier/coffret de transport inclus :S.O. Poids (kg) :1,36 Garantie :Limitée de 3 ans Type :De finition Type de couronne :Couronne moyenne, Conforme aux exigences de l'ANSI :Non Poids (lb) :3 Réglage de la profondeur :Pas une option Matériau du boîtier :Acier Dégagement des pièces de fixation bloquées :Sans outil Capacité de la cartouche :100 Pression maximale - lb/po2 :120 Longueur d'agrafe maximale (cm) :1,42875 Longueur d'agrafe maximale (po) :0.5625 Longueur d'agrafe maximale (mm) :14,2875 Nom de la gamme :Pt50 Largeur de la couronne des agrafes :3/8 p Calibre des agrafes :18

Produits fréquemment achetés ensemble

CAMPBELL HAUSFELD
Compresseur à air électrique « Quiet Series », 8 gal, 1,0 HP
Format 8GAx1HP
N° d'article 73455217
N° de modèle DC080500
★★★★★ ★★★★★
5
(6)
CAMPBELL HAUSFELD
Compresseur d'air vertical 3,7 hp Campbell Hausfeld, 60 gal, 175 lb/po², marine
Format 60GAx3.7HP
N° d'article 73455238
N° de modèle XC602100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Compresseur d'air vertical 5 hp Campbell Hausfeld, 80 gal, 175 lb/po², marine
Format 80GAx5HP
N° d'article 73455239
N° de modèle XC802100
★★★★★ ★★★★★
0
(0)
KOBALT
Ensemble de raccords et connecteurs industriels de Campbell Hausfeld
Format 4MX
N° d'article 7345028
N° de modèle MP211900AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Pistolet à air
N° d'article 7345042
N° de modèle MP514300AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ensemble de 17 accessoires Campbell Hausfeld
Format 17MX
N° d'article 7345027
N° de modèle MP284701AV
★★★★★ ★★★★★
0
(0)
M-D CANADA
Boyau à air Contracteur par M-D Canada, 3/8 po x 25 pi
Format 3/8"x25'
N° d'article 0412762
N° de modèle HAC3825
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ensemble d'accessoires pour compresseur d'air de 20 pièces
Format 20MX
N° d'article 73455233
N° de modèle MP604103AV
★★★★★ ★★★★★
0
(0)
M-D CANADA
Boyau à air Contracteur par M-D Canada, 3/8 po x 50 pi
Format 3/8"x50'
N° d'article 0412763
N° de modèle HAC3850
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Gonfleur de pneus avec manomètre
Format 10-100LB
N° d'article 73455195
N° de modèle MP600000AV
★★★★★ ★★★★★
1
(2)
DEGIL SAFETY
Lunettes de sécurité antibuée Degil Safety, lentilles en polycarbonate, monture en nylon, traitée anti-rayures
N° d'article 86575158
N° de modèle 7050500
★★★★★ ★★★★★
0
(0)
DEGIL SAFETY
Lunettes de sécurité Degil Safety, lentilles et monture en polycarbonate, anti-rayures, transparentes
N° d'article 8657090
N° de modèle 7052000
★★★★★ ★★★★★
4,9
(9)
ARROW
Agrafes
Format 1/4" BT1250
N° d'article 0012027
N° de modèle 50424
★★★★★ ★★★★★
4,7
(39)
ARROW
Agrafes
Format 5/16" BT1250
N° d'article 0012028
N° de modèle 50524
★★★★★ ★★★★★
4,7
(38)
ARROW
Agrafes
Format 3/8"xPK1250
N° d'article 0012029
N° de modèle 50624
★★★★★ ★★★★★
4,7
(95)

Vous pourriez aussi aimer

METABO HPT
Cloueuse à charpente pneumatique à bandes Metabo HPT, 2 po à 3 1/2 po, 30°
Format 2-3 1/2"x34DG
N° d'article 37815181
N° de modèle NR90ADS1M
★★★★★ ★★★★★
4,5
(137)
METABO HPT
Cloueuse à toiture pneumatique à rouleaux Metabo HPT, 7/8 po à 1 3/4 po, 16°
Format 7/8-1 3/4"x16DG
N° d'article 37815178
N° de modèle NV45AB2M
★★★★★ ★★★★★
4,8
(236)
METABO HPT
Cloueuse à charpente pneumatique pour clous à tête ronde Metabo HPT, 16°
Format 1 3/4-3 1/2"x16DG
N° d'article 37815179
N° de modèle NV90AGSM
★★★★★ ★★★★★
4,4
(34)
BOSTITCH
Cloueuse à toiture pneumatique Bostitch, angle de 15°, réglage de la profondeur sans outil, chargeur à deux portes
Format 3/4-1 3/4"x15DG
N° d'article 00277070
N° de modèle BRN175A
★★★★★ ★★★★★
3,7
(3)
METABO HPT
Cloueuse de charpente sans fil Metabo HPT avec pile et chargeur, moteur sans balais, 30°, indicateur de charge
Format 2-3 1/2"x18V
N° d'article 37815170
N° de modèle NR1890DCM
★★★★★ ★★★★★
4,7
(179)
BOSTITCH
Cloueuse de finition pneumatique Bostitch, calibre 18, 5/8 po à 2 po
Format 5/8-2"x18CA
N° d'article 00276209
N° de modèle BTFP1850K
★★★★★ ★★★★★
4,2
(22)
METABO HPT
Cloueuse de finition pneumatique à bandes Metabo HPT, 5/8 po à 2 po
Format 5/8-2"x18CA
N° d'article 37815180
N° de modèle NT50AE2M
★★★★★ ★★★★★
4,6
(879)
BOSTITCH
Cloueuse à charpente industrielle 28° Bostitch, bouton pour ajustement de la profondeur, indicateur de 16 po, légère
Format 2 @3 1/2"
N° d'article 0277074
N° de modèle F28WW
★★★★★ ★★★★★
3,7
(13)
BOSTITCH
Cloueuse pneumatique 2-en-1 Bostitch, agrafe, emboîture en forme en L, plaques de base interchangeables, ergonomique
N° d'article 00276202
N° de modèle BTFP12569
★★★★★ ★★★★★
4,5
(99)
PASLODE
Cloueuse-Agrafeuse de calibre 18 par Paslode
Format 18CA
N° d'article 22935197
N° de modèle P18-FS200
★★★★★ ★★★★★
3,6
(5)
METABO HPT
Ensemble d'agrafeuse pneumatique Metabo HPT, couronne de 1/4 po, calibre 18, réglage sans outil, conception ergonomique
Format 1/2-1 1/2"x18CA
N° d'article 37815177
N° de modèle N3804AB3M
★★★★★ ★★★★★
4,6
(151)
PASLODE
Cloueuse Lite-Line Paslode
Format 23CA
N° d'article 22935168
N° de modèle HP100
★★★★★ ★★★★★
0
(0)
KOBALT
Cloueuse Kobalt XTR calibre 18 avec capacité de 110 clous
Format 24V
N° d'article 45595104
N° de modèle KNA 2024A-03
★★★★★ ★★★★★
4,6
(51)
METABO HPT
Cloueuse sans fil avec pile et chargeur Metabo HPT de calibre 18, moteur sans balais, lumière DEL, commutateur à verrou
Format 5/8-2"x18CAx18V
N° d'article 37815171
N° de modèle NT1850DEM
★★★★★ ★★★★★
4,6
(100)
PASLODE
Cloueuse de finition pneumatique Powertrim de chez Paslode
Format 5/8-2"x18CA
N° d'article 22935195
N° de modèle P18-200
★★★★★ ★★★★★
4
(1)
PASLODE
Agrafeuse à rembourrage
Format 22CA
N° d'article 2293124
N° de modèle US-100
★★★★★ ★★★★★
5
(2)
BOSTITCH
Cloueuse Bostitch de revêtement et de bardage à bobine 15 degrés
N° d'article 0277073
N° de modèle N89C-1
★★★★★ ★★★★★
0
(0)
PASLODE
Cloueuse à charpente pneumatique Paslode, 3 1/4 po
Format 2-3 1/4"x30DG
N° d'article 22935203
N° de modèle 513000
★★★★★ ★★★★★
4,3
(25)
PASLODE
Cloueuse à charpente Paslode, tête en D, bande de 84 clous
Format 2-3 1/4"x30DG
N° d'article 2293057
N° de modèle 501000
★★★★★ ★★★★★
4,4
(20)
MAKITA
Cloueuse de finition Makita, 1 1/4 po à 2 1/2 po, calibre 15
Format 2 1/2"x15CA
N° d'article 11975386
N° de modèle AF635
★★★★★ ★★★★★
0
(0)
METABO HPT
Cloueuse de 2 1/2 po sans fil avec pile et chargeur Metabo HPT de 18 V, calibre 16, commutateur, lumière DEL
Format 1-2.5"x16CAx18V
N° d'article 37815172
N° de modèle NT1865DMM
★★★★★ ★★★★★
4,4
(142)
CRISP-AIR
Agrafeuse pneumatique Crisp-Air à couronne étroite, 1/4 po, calibre 18
Format 1/4"
N° d'article 46595015
N° de modèle APF9040
★★★★★ ★★★★★
0
(0)
BOSTITCH
Cloueuse à charpente à bandes Bostitch, 30 degrés
Format 2-3 1/4"x30DG
N° d'article 00277473
N° de modèle BTF83PT
★★★★★ ★★★★★
4,5
(2)
PASLODE
Cloueuse sans fil avec pile et chargeur Paslode, calibre 16, charge rapide, agrafe pour courroie réversible
Format 16CAx5/8-2"
N° d'article 22935206
N° de modèle 903800
★★★★★ ★★★★★
5
(1)

Lorsque vous indiqué 120 PSI cela signifie qu'elle fonctionne jusqu'à 120 PSI ou a partir de 120 PSI ?

Posée par: Eul-Mo
La pression d'air maximale est de 120 lb/po2, la pression d'air opérationnelle suggérée est comprise entre 60 lb/po2 et 100 lb/po2.
Répondue par: Arrow Fastener Team
Date de publication: 2022-05-11
  • y_2023, m_5, d_30, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_00125088, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 21ms
  • QUESTIONS, PRODUCT
Ensemble d'agrafeuse pneumatique Arrow, couronne de 3/8 po, calibre 18, recharge rapide, gâchette Bump-Fire est évalué 4.5 de 5 de 901.
Rated 5 de 5 de par Best Little Stapler I went searching for a stapler to upholster marine plywood with a 3/8 stainless staple. I tried every electric one available with no success of driving the staple flush.. With 120 pounds of air pressure it buried the staple in everything I tried it on.. I ended knocking back the regulator to 75 pounds to set it where needed. This never missed a hit, was easy to load, light , use very little air and had a handy storage case. The only drawback was getting used to where the safety plunger was in relation to where the staple exited the gun. Many times I was trying to lay a staple in close quarters, , just a little practice…
Date de publication: 2013-10-25
Rated 4 de 5 de par tricky tricky At first this unit worked perfectly, fired a strip of 80 staples no problem, then it began misfiring as i became more comfortable with it. the firing pin wouldn't fully retract and feed another staple causing it to simply dry fire, i tried cycling the loading spring and oiling the pin itself but none of this helped. soon i discovered what the problem was, picking the nose off the work before allowing the air to finish venting. For some reason that lets the pin fully retract and not get stuck. After pausing for a moment after each shot before lifting the tip off the work it fired flawlessly through multiple rows of staples ( about 500 in one go ) while stapling insulation. i would recommend this staple gun, at around $30 its cheaper than my electric staple gun and is much more powerful. they just need to work on the return of the firing pin so you can properly use the bump fire feature.
Date de publication: 2015-10-19
Rated 4 de 5 de par Easy to use We got this tool expecting it to be easier to work with than the hammer-type or squeeze-handle type since we are stapling overhead. It met that expectation with flying colors - and it is fast as well. The problem we have with the thing is the spring that feeds the staples - so far we have had to take it apart twice to hook the spring loops back onto the little retainer hooks.
Date de publication: 2014-07-06
Rated 4 de 5 de par Best Value for Price We were thoroughly impressed by this staple gun and made installing insulation a breeze! For the price of the gun, I was expecting something to go wrong with it soon after first use, but alas it has proven me wrong. I would highly recommend this product to someone is on a budget but still looking for a quality product.
Date de publication: 2014-01-31
Rated 5 de 5 de par Good tool Purchased this stapler to attach chicken fence to the fence frame. Used two boxes of staples so far (2500). On time the hammer stuck, probably because I failed to oil the stapler. After oiling, it worked fine. A few staples collapsed, maybe a dozen. Sets 1/2 and 9/16 staples in pine at 80 psi with 200 feet of air hose. Light and easy to handle.
Date de publication: 2015-09-19
Rated 5 de 5 de par bought to help install insulation. easy to use and load, light weight and gets the job done.
Date de publication: 2013-10-16
Rated 3 de 5 de par Light weight and easy to use Staples jam when used for longer periods of time or when firing quickly. There are no Manuel adjustments on the stapler gun for adjusting the depth that the staple penetrates. You have to adjust the depth by backing off on the psi of the compressor. I used it for light weight upholstery project and it was adequate but not outstanding. The price point was a little high for the quality of the product. It is light and easy to use for a woman. I think the ergonomics could be improved for less stress on the muscles in the palm and wrist and for that reason I will be looking at other staple guns for future upholstery projects that are more indepth
Date de publication: 2015-04-02
Rated 4 de 5 de par Rare Find - Perfect Tool [This review was collected as part of a promotion.] This stapler is not the common narrow crown type. The wider crown makes it perfect for screen projects. The wider crown provides plenty of gripping of the screen fabric which in turn makes an excellent and tight installation. The only alternative was a manual stapler which was not suitable for the project the size of a screened porch. No jams, no miss fires. One annoyance, the rubber tip came off very easily and the stapler would not fire without it. Finding that tip on the ground was not easy. Suggest that a snap-in or locking design be develope to keep the rubber / plastic tip captive.
Date de publication: 2019-07-27
  • y_2023, m_5, d_30, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_901
  • loc_fr_CA, sid_00125088, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 4ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin