Évent d'évacuation pour soffite Imperial en plastique, blanc

N° d'article 12245416 N° de modèle VTL0021-A Format4"-6"
Évent d'évacuation pour soffite Imperial en plastique, blanc
 

Caractéristiques

Évent d'évacuation Imperial pour la ventilation de la cuisine et de la salle de bain. Évacue l'humidité et les odeurs vers l'extérieur. Conçu avec un registre papillon pour un débit d'air maximal et une économie d'énergie. Se monte sous le soffite. S'adapte à un conduit d'évacuation rond de 4 et 6 pouces.

  • Ventilateur de soffite rond facile à installer, idéal pour la ventilation de la cuisine et de la salle de bain
  • Se monte sous le soffite et s'adapte aux conduits d'évacuation ronds de 4 et 6 pouces
  • Conception de montage encastré à profil bas
  • Evacue efficacement l'humidité et les odeurs vers l'extérieur de la maison
  • Le plastique résistant aux UV résiste à la décoloration et à la décoloration due au soleil
  • Peut être peint pour s'harmoniser avec l'extérieur de votre maison
  • Le volet papillon offre un débit d'air maximal et une économie d'énergie
  • Sa conception permet d'empêcher les oiseaux et les rongeurs de pénétrer dans la maison

Spécifications techniques

Famille de couleurs/finis :Blanc Longueur (cm) :21,59 Longueur (po) :8.5 Longueur (mm) :215,9 Couleur/fini du fabricant :Blanc Matériau :Plastique Surface libre de filet (cm2) :34,128964 Surface libre de filet (po2) :5,2 Quantité par emballage :1 Longueur de la structure (cm) :21,59 Longueur de la structure (po) :8.5 Longueur de la structure (mm) :215,9 Largeur de la structure (cm) :21,59 Largeur de la structure (po) :8.5 Largeur de la structure (mm) :215,9 Nom de la gamme :S.O. Garantie :Limitée d'un an Poids (kg) :0,285768 Poids (lb) :0,63 Largeur (cm) :21,59 Largeur (po) :8.5 Largeur (mm) :215,9

Vous pourriez aussi aimer

IMPERIAL
Tuyau flexible en aluminium
Format 4"x8'
N° d'article 1224357
N° de modèle FX0456-A
★★★★★ ★★★★★
0
(0)
BOFLEX
Tuyau flexible isolé UL 181 de catégorie 1, 4" x 25'
Format 4"x25'
N° d'article 12245309
N° de modèle MEA-0425
★★★★★ ★★★★★
0
(0)
IMPERIAL
Évent d'évacuation «R2»
Format 6"
N° d'article 1224551
N° de modèle VT0503-A
★★★★★ ★★★★★
0
(0)
BOFLEX
Tuyau flexible isolé UL 181 de catégorie 1, 4" x 10'
Format 4"x10'
N° d'article 12245308
N° de modèle MEA-0410
★★★★★ ★★★★★
5
(1)
IMPERIAL
Ensemble d'évent de sécheuse Imperial, 4 po x 8 pi
Format 4"x8'
N° d'article 12245418
N° de modèle VTL0029-A
★★★★★ ★★★★★
2,9
(122)
IMPERIAL
Tuyau semi-rigide IMPERIAL flex 4 po x 8 pi
Format 4"x8'
N° d'article 12245409
N° de modèle FXL0002-A
★★★★★ ★★★★★
2,9
(59)
IMPERIAL
Conduit d'aération flexible Imperial en aluminium, 4 po x 20 pi
Format 4"x25'
N° d'article 12245417
N° de modèle FXL0006-A
★★★★★ ★★★★★
4,4
(42)
IMPERIAL
Évent d'évacuation «R2» pour hotte
Format 3 1/4x10"
N° d'article 1224546
N° de modèle VT0500-A
★★★★★ ★★★★★
0
(0)
IMPERIAL
Capuchon évent IMPERIAL pour sécheuse plastique blanc 4 po
Format 4"
N° d'article 12245406
N° de modèle VTL0015-A
★★★★★ ★★★★★
4,1
(91)
IMPERIAL
Collet Ajustable
Format 4"
N° d'article 1224380
N° de modèle VT0105-A
★★★★★ ★★★★★
0
(0)
IMPERIAL
Capuchon d'évent mural acier galvanisé blanc de 4" « R2 »
Format 4"
N° d'article 1224550
N° de modèle VT0497-A
★★★★★ ★★★★★
3
(2)
IMPERIAL
Conduit flexible semi-rigide Imperial en aluminium, 6 po x 96 po
Format 6"x96"
N° d'article 12245435
N° de modèle FXL0003-A
★★★★★ ★★★★★
3
(21)
IMPERIAL
Conduit d'aération flexible en aluminium Imperial, 6 po x 25 pi
Format 6"x25'
N° d'article 12245434
N° de modèle FXL0007-A
★★★★★ ★★★★★
4,7
(11)
BOFLEX
Tuyau flexible isolé UL 181 de catégorie 1, 6" x 25'
Format 6"x25'
N° d'article 12245312
N° de modèle MEA-0625
★★★★★ ★★★★★
0
(0)
IMPERIAL
Tuyau semi rigide Imperial, aluminium flexible, 5 po x 8 pi
Format 5"x8'
N° d'article 1224203
N° de modèle FX0026-A
★★★★★ ★★★★★
0
(0)
IMPERIAL
Évent d'évacuation mural, R2, acier, 4", noir
Format 4"
N° d'article 12245302
N° de modèle VT0729
★★★★★ ★★★★★
5
(1)
IMPERIAL
Évent d'évacuation, entrée d'air mural, R2, acier, 6", noir
Format 6"
N° d'article 12245303
N° de modèle VT0730
★★★★★ ★★★★★
5
(3)
IMPERIAL
Évent d'évacuation «R2»
Format 5"
N° d'article 1224549
N° de modèle VT0502-A
★★★★★ ★★★★★
0
(0)
BOFLEX
Tuyau flexible Vinyle
Format 6"x10'
N° d'article 0082054
N° de modèle CS-0610
★★★★★ ★★★★★
3
(2)
BOFLEX
Tuyau flexible isolé UL 181 de catégorie 1, 6" x 10'
Format 6"x10'
N° d'article 12245311
N° de modèle MEA-0610
★★★★★ ★★★★★
4
(1)
IMPERIAL
Tuyau flexible, APS, 4"x5'
Format 4"x5'
N° d'article 0082108
N° de modèle APS-0405-A
★★★★★ ★★★★★
0
(0)
VENTILATION MAXIMUM
Évent de toit Ventilation Maximum, acier galvanisé, noir, 4 po de diamètre
Format 4"
N° d'article 6467031
N° de modèle CT-4-N
★★★★★ ★★★★★
1,6
(5)
BOFLEX
Tuyau flexible isolé UL 181 de catégorie 1, 5" x 25'
Format 5"x25'
N° d'article 12245310
N° de modèle MEA-0525
★★★★★ ★★★★★
0
(0)
BOFLEX
Tuyau flexible en Vinyle
Format 5"x10'
N° d'article 0082053
N° de modèle CS-0510-A
★★★★★ ★★★★★
1
(1)
IMPERIAL
Ensemble pour ventilation de sécheuse Imperial, 4 po x 8 pi
Format 4"x8'
N° d'article 12245420
N° de modèle VTL0032-A
★★★★★ ★★★★★
1,8
(4)

Is there a step on the hose conection to recieve a 5 inch duct hose?

Posée par: Rick 22

How much CFM do these take?

Posée par: Fred104

I bought an imperial soffit exhaust vent, it will not fit in the soffit will this exhaust vent work on an exterior wall?

Posée par: oneeye070
  • y_2023, m_6, d_3, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasquestions, tq_3
  • loc_fr_CA, sid_12245416, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 5ms
  • QUESTIONS, PRODUCT
Évent d'évacuation pour soffite Imperial en plastique, blanc est évalué 4.2 de 5 de 36.
Rated 5 de 5 de par Good vent! I purchased 2 of these to vent the exhaust on new install bathroom fans and they work perfectly. The flapper opens easily and they look good in the soffit. I had no problem attaching 4" flexible ducting though I don't think you will have much luck if you use the cheap rigid stuff. The ducting I used (bought it on A****n so I can't tell you the brand name) seems to have a more flexible foil and it was relatively easy to use a fingernail to pull the wire coils over the tabs, one at a time, without tearing anything up. It seems like they should be less expensive but hopefully they are a onetime purchase and I am happy with them.
Date de publication: 2013-12-22
Rated 3 de 5 de par Good idea, but needs modification Right out of the box before installation, I have found that pressing on either flap causes it to pop out of one of the holes that it pivots in. The tabs that snap into the housing are too short on both flaps. I'm going to drill a small hole in all 4 tabs and insert small screws just far enough to keep the flaps centered in the housing. I probably just got one from a bad batch because no other review mentions this problem. I like to tinker with things so I'm not too upset about it. By the way, this thing is bigger than in looks in the picture. I can see now why they recommend a certain size soffit.
Date de publication: 2017-04-18
Rated 3 de 5 de par Baffle a little too strong I attached this vent along with a new 110 CFM fan, and the baffle barely opens. As a result, my air flow doesn't seem any better than it was before with the old 50cfm fan and vent. As others have mentioned, the spring will certainly loosen up over time, but I wish I had seen the comments about adding some weights to the baffle so that it opened better now. I did not like the absence of a pest screen, so I added 1/4 inch hardware cloth behind the plastic grill. I don't think this hardware cloth is fine enough to be significantly impacting the flow. I wish a screen came as a standard offering.
Date de publication: 2021-07-21
Rated 5 de 5 de par Great product but one thing to add to it.......... This looks great and sits flush with the soffit. One area that could be improved on (we just added our own) it that some screen placed inside the cap would keep the spiders and the bees out. We needed to replace our old style ones because of chronic wasps nests inside the vent flap. I would like to see these with a built in screen one day.
Date de publication: 2015-03-14
Rated 4 de 5 de par Strong baffle I tested this thing on the bench before I installed it. I used a manometer to measure the back pressure as my fan had a specification of 80cfm @ .25" H20. Out of the package it produced .30 - .32" H20. The spring was simply too strong. If you are going to do your own testing you must hang the vent in the same position it will be installed in as gravity helps to open the flaps. I solved the excessive back pressure problem by using aluminum HVAC tape to attach a coin (quarter) on each flap. If you are going to do this 2 pennies are about the same weight as a quarter. This resulted in .20" of back pressure which should work out to about .25" when the 4 foot of duct is attached to it. If your duct run is longer you will likely have to attach more weight to open the flaps more. The springs will loosen up with time so its probably best to keep it a little tighter than it should be.
Date de publication: 2015-07-17
Rated 5 de 5 de par It works After reviewing several soffit vents, I selected this one. Reasonalble price. It has a decent damper on it that works. Adaptable to either 4" or 6" is a plus. I will use this again instead of going thru the roof with a vent.
Date de publication: 2012-07-28
Rated 5 de 5 de par Super Nice This was easy to install and works very well. I would recomend this to anyone who wants quality. My bathroom fan vents so much better now.
Date de publication: 2011-10-31
Rated 5 de 5 de par Worked for me I have used 3 of these so far, 2 for bath exhaust and 1 for fresh air intake. I had to modify a little to work with metal ducting, but no problem. I cut aluminum screen to keep out the bugs, and after roughing the surface with sandpaper, applied a plastic primer, and then a dark Bronze paint to match my color scheme. I used metal 6" duct and locked the elbow turned down into the soffit vent with metal bracing so it can't move. I screwed the soffit vent into the cedar soffit board, which fit tight. I did not tape that last joint so I can remove the vent to clean the screen, or service the dampers, even replace it entirely. The fresh air intake is passive for the woodstove combustion air; I just removed the dampers and added screen, and installed a manual damper to block it off for the summer.
Date de publication: 2017-09-05
  • y_2023, m_6, d_3, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_36
  • loc_fr_CA, sid_12245416, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 6ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin