Fausse équerre coulissante numérique

N° d'article 01215292 N° de modèle 828 Format8"
Fausse équerre coulissante numérique
 

Caractéristiques

Mesure angle intérieur ou extérieur. Élimine les erreurs de transfert de données. Lame en acier inoxydable 8". Maintient et transfère les angles d'une pièce à l'autre. Affichage ACL complet et mise hors tension automatique. Précision 0,3°. Gamme 0° à 360° (résolution 0,05°). Pile au lithium 3 V (CR2032) comprise.

Spécifications techniques

Vous pourriez aussi aimer

FULLER
Ruban à mesurer verrouillable, SAE/métrique, 25'
Format 1"x25'
N° d'article 70155073
N° de modèle 750-0030
★★★★★ ★★★★★
5
(1)
JOHNSON
Crayon de menuisier, paquet de 2
Format CR2
N° d'article 54455001
N° de modèle 40-0660
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Ruban à mesurer autobloquant, 1" x 25'
Format 1"x25'
N° d'article 00276608
N° de modèle CMHT37225S
★★★★★ ★★★★★
4,6
(33)
STANLEY
Marqueur permanent
Format PK2
N° d'article 0305499
N° de modèle 47-316
★★★★★ ★★★★★
1
(2)
CRAFTSMAN
Niveau en I de 48", fioles 360°, aluminium, rouge et noir
Format 48"
N° d'article 00276925
N° de modèle CMHT82345
★★★★★ ★★★★★
4,4
(37)
JOHNSON
Équerre d'angle
Format 7"
N° d'article 0704089
N° de modèle 40-0519B
★★★★★ ★★★★★
0
(0)
IRWIN
Niveau torpille magnétique Irwin, 9 po
Format 9"
N° d'article 02445174
N° de modèle 1794159
★★★★★ ★★★★★
0
(0)
JOHNSON
Niveau de ligne
Format PK2
N° d'article 07045019
N° de modèle 40-0201
★★★★★ ★★★★★
0
(0)
ZIRCON
Détecteur de montants StudSensor L20, jaune
N° d'article 68855006
N° de modèle 66993
★★★★★ ★★★★★
3
(195)
JOHNSON
Équerre à angle
Format 7"
N° d'article 0704054
N° de modèle 40-0518
★★★★★ ★★★★★
0
(0)
ZIRCON
Détecteur de montant « L40 »
N° d'article 68855009
N° de modèle 66994
★★★★★ ★★★★★
3,4
(129)
CRAFTSMAN
Ruban à mesurer autobloquant, 1'' x 26', rouge
Format 1"x26'
N° d'article 00277072
N° de modèle CMHT37226S
★★★★★ ★★★★★
4
(6)
CRAFTSMAN
Niveau en I de 24", fioles 360°, aluminium, rouge et noir
Format 24"
N° d'article 00276924
N° de modèle CMHT82344
★★★★★ ★★★★★
4,9
(34)
JOHNSON
Ruban à mesurer
Format 1 1/16"x25'
N° d'article 07045053
N° de modèle 40-1925
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Ruban à mesurer, haute visibilité, 1'' x 26', vert
Format 1"x26'
N° d'article 00277033
N° de modèle CMHT37126S
★★★★★ ★★★★★
5
(1)
CRAFTSMAN
Ruban à mesurer, Haute Visibilité, 25'
Format 1/2"x25'
N° d'article 00276746
N° de modèle CMHT37125LW
★★★★★ ★★★★★
4,4
(74)
JOHNSON
Niveau gradué Johnson en aluminium, 24 po
Format 24"
N° d'article 07045037
N° de modèle 40-2086
★★★★★ ★★★★★
0
(0)
JOHNSON
Niveau d'aplomb de poteau Johnson à 3 fioles
N° d'article 0704007
N° de modèle 40-0224
★★★★★ ★★★★★
4,8
(45)
JOHNSON
Crayon de menuisier, boîte de 40
Format BT40
N° d'article 36985002
N° de modèle 40-0661
★★★★★ ★★★★★
0
(0)
DEWALT
Niveau laser automatique en croix
Format 165'
N° d'article 00275756
N° de modèle DW088K
★★★★★ ★★★★★
4
(7)
CRAFTSMAN
Ruban à mesurer PRO-11, 1,25'' X 25', rouge
Format 1.25"x25'
N° d'article 00277031
N° de modèle CMHT37525LW
★★★★★ ★★★★★
4,6
(69)
JOHNSON
Niveau de surface
Format 3"
N° d'article 0704040
N° de modèle 40-0200
★★★★★ ★★★★★
2,8
(4)
JOHNSON
Crayons de menuisier et aiguisoir Johnson, 11 pièces
Format 11MX
N° d'article 54455002
N° de modèle 40-0667
★★★★★ ★★★★★
0
(0)
LUFKIN
Ruban à mesurer Shockforce Nite Eye, double face, 25'
Format 1 3/16"x25'
N° d'article 01855521
N° de modèle L1125B
★★★★★ ★★★★★
4
(67)
JOHNSON
Équerre en T professionnelle Johnson, aluminium, 48-po
Format 48"
N° d'article 0704049
N° de modèle 40-0504
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Fausse équerre coulissante numérique est évalué 4.0 de 5 de 43.
Rated 1 de 5 de par I need to stop buy things that are made by General Was hoping to use this to measure angles for wood working but this things is kind of a joke. I'm not a tool snob and I usually don't mind Jerry rigging stuff in order to make it work but this is going back to Lowes ASAP. First off it isn't very well built. Second, if you have it on a flat surface and zero it, move it a few degrees and then move it back to zero, all while keeping it on the flat reference, it will read anywhere from 1 to 2 and sometimes 2.5 degrees off. Now, for building a house 1 or 2 degrees might not be an issue when putting in studs and such, but for making furniture, 1 degree can make or break a project. This thing is going back... If I can find the receipt...
Date de publication: 2016-12-11
Rated 4 de 5 de par Good for Quick Jobs [This review was collected as part of a promotion.] I purchased this Bevel Gage and it worked for the quick job I was completing. Calculate the angle, set the saw, cut the wood, perfect angle. However, the method to zero the gage seems straightforward but the rounded portion of the metal blade does not fit well within the handle. I had to double check that the blade was straight. Yes, I am a perfectionist. I rated this product as a 5 because the gage performed as expected and the result was exactly what I wanted. If there were an option for a 4.9 rating, I would have opted for that rating instead.
Date de publication: 2018-08-04
Rated 4 de 5 de par A decent Product The digital readout is easy to use and the item is fairly accurate. I tested in on my drafting triangles and it was always within about half of a degree.
Date de publication: 2016-01-15
Rated 2 de 5 de par Has signifigant play between the moving parts Would have gone 3 stars except that lowes lists the accuracy as .05 degrees. On the package it states .3 degrees. In practice, it's over a degree non accurate due to the knife slipping inside the gauge. If you only move it in one direction, for example open it or close it, it's accuracy is darn good. If you wiggle it to find the angle, forget it. I also had the screw pop off while putting it away. I think I may take mine apart and glue the slide into a fixed position. Overall I think it will be usefull for stave drum building and tool set up. I like that I can read the gauge. My eyes aren't good enough to spot a good line up anymore. A bit disappointed, but I would recommend as long as you understand where the flaw is.
Date de publication: 2016-12-11
Rated 5 de 5 de par Great tool for your back pocket , easy to use find that unknown angle of the corner that should be 90 may not be , check it before you cut the expensive molding You can flip the angle to have the missing angle (or opposite ) side of the angle Of coarse to make sure get out you old true square put he unit on your square and "zero" the T bevel now you have a true square device to work with.
Date de publication: 2016-10-02
Rated 1 de 5 de par Very poorly built Not very accurate, has play in it. First one I bought the interior screw came loose first day pining the slide from opening. Returned it and the next one had the screw holding the metal disk even though it was tight in my belt backed itself loose and fell out while I was putting it away somewhere in the yard. They need to have a weld or something at the end of the screw so it doesn't fall apart all of the time! Second time it's happened 30 bucks and two trips to the store across town wasted...
Date de publication: 2016-07-20
Rated 5 de 5 de par under $30 it is a no brain-er. I have older bevel gauges that one has to transfer the angle to a protractor. This is a good tool. I even use it for setting my metal lathe tool post angle. I also have one at school where I teach applied mathematics. Mathematics for the Machine Trades. One must understand your geometry- supplementary-complementary angles.
Date de publication: 2016-01-18
Rated 5 de 5 de par T-Bevel digital I have been looking at these for quite a while and finally bought one. I really like it and use it for doing segmented bowls. If the angle is not right the gaps between the segments will have gaps. I was never a fan of sliding bevels but this one is really nice and worth having.
Date de publication: 2017-07-03
  • y_2021, m_5, d_11, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_43
  • loc_fr_CA, sid_01215292, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin