Fini pour bois à base d'huile Australian Timber de Cabot, naturel, translucide, 3,78 L

N° d'article 87005064 N° de modèle 142.0019400.007 Format3.78L
Fini pour bois à base d'huile Australian Timber de Cabot, naturel, translucide, 3,78 L
 

Caractéristiques

Utilisations recommandées pour terrasses extérieures en bois, parement, clôtures, garde-corps, marches, meubles extérieurs en bois, pour les substrats en bois seulement. «Cabot Australian Timber Oil» est un mélange unique d'huiles formulées à l'origine pour protéger les bois denses d'Australie. Il s'agit d'un traitement à l'huile translucide éprouvé et spécialement formulé pour les terrasses et les meubles extérieurs. Pénètre profondément dans le bois pour accentuer la profondeur et la patine du bois naturel. Contenant un mélange précis d'huile de lin de qualité superbe pour une pénétration maximale, d'alkydes longs en huile pour la durabilité et d'huile de tung (huile de bois de chine) pure pour la profondeur de couleur et l'imperméabilité à l'eau, elle offre une protection à l'huile à triple action. Des pigments d'oxyde ferrique translucides complexes sont ajoutés afin de garantir une surface durable qui absorbe les rayons UV avec des couleurs et des dimensions riches. 3,78 l. Couleur naturelle.

Spécifications techniques

Modèle :Australian timber oil Couleur :Naturel Fini :Mat COV :275 g/l. Format :946 ml Superficie :250-350 pi.ca Opacité :Translucide Protection ultra-violets (O/N) :Oui Hydrofuge (O/N) :Oui Intérieur/Extérieur :Extérieur Composante :Base d'huile

Produits fréquemment achetés ensemble

SIMMS
Pinceau à peinture Simms, manche en plastique, poils épais et longs en polyester, 5 po l.
Format 125MM
N° d'article 01585145
N° de modèle 1960-5
★★★★★ ★★★★★
5
(2)
CIRCA 1850
Gants de décapage
Format MEDIUM
N° d'article 0776252
N° de modèle 130101
★★★★★ ★★★★★
0
(0)
SICO
Décapant pour bois 3.78L
Format 3.78L
N° d'article 50316492
N° de modèle 802-111A-3.78L
★★★★★ ★★★★★
2
(6)
THOMPSON'S WATERSEAL
Imperméabilisant multisurfaces Thompson's WaterSeal, clair, faible COV, 9,45 L
Format 9.45LT
N° d'article 14495278
N° de modèle THCP40011-02
★★★★★ ★★★★★
3,3
(59)
SICO
Nettoyeur-raviveur-conditionneur pour bois Sico, extérieur, 3,78 L
Format 3.78L
N° d'article 50317179
N° de modèle 771-333A 3,78L
★★★★★ ★★★★★
0
(0)
TECHNISEAL
Décapant à teinture pour bois Techniseal, à base d'eau, sans grattage, 4 L
Format 4L
N° d'article 7924057
N° de modèle 144-544
★★★★★ ★★★★★
3
(4)
SIMMS
Ensemble pour teinture et peinture Simms, pinceau de 3 po l., plateau, 2 manchons, manche
Format 5MX
N° d'article 01585190
N° de modèle S575
★★★★★ ★★★★★
0
(0)

Vous pourriez aussi aimer

SICO
Revêtement d'extérieur pour bois Sico, translucide, chêne, à base d'huile, semi-lustré, 3,78 L
Format 3.78L
N° d'article 50316478
N° de modèle 236-580-3.78L
★★★★★ ★★★★★
4,1
(15)
OLYMPIC
Teinture et scellant imperméabilisant pour bois d'extérieur Olympic Maximum, à base d'eau, clair, 3,78 L
Format 3.78L
N° d'article 63575201
N° de modèle 56400C/01
★★★★★ ★★★★★
3,8
(8)
SICO
Revêtement d'extérieur pour bois Sico, translucide, séquoia, à base d'huile, semi-lustré, 3,78 L
Format 3.78L
N° d'article 50316480
N° de modèle 236-780-3.78L
★★★★★ ★★★★★
4,5
(11)
OLYMPIC
Teinture et scellant deux-en-1 pour bois Olympic Maximum, imperméabilisant, cèdre naturel, 3,78 L
Format 3.78L
N° d'article 63575202
N° de modèle 56403C/01
★★★★★ ★★★★★
2,3
(7)
CABOT
Fini pour bois à base d'huile Australian Timber de Cabot, teck miel, translucide, 3,78 L
Format 3.78LT
N° d'article 87005068
N° de modèle 142.0019458.007
★★★★★ ★★★★★
3,7
(215)
CABOT
Fini pour bois à base d'huile Australian Timber de Cabot, brun de Jarrah, transparent, 3,78 L
Format 3.78LT
N° d'article 87005072
N° de modèle 142.0019460.007
★★★★★ ★★★★★
3,7
(210)
CABOT
Fini pour bois à base d'huile Australian Timber de Cabot, acajou enflammé, translucide, 3,78 L
Format 3.78LT
N° d'article 87005070
N° de modèle 142.0019459.007
★★★★★ ★★★★★
3,7
(213)
SAMAN
Teinture et vernis en une étape pour bois d'intérieur Saman, à base d'eau, charbon, faible COV, 946 ml
Format 946ML
N° d'article 72645226
N° de modèle SAM-320-1L
★★★★★ ★★★★★
0
(0)
CABOT
Teinture colorée d'extérieur pour terrasses et parements Cabot, à base d'huile, hydrofuge, 3,78 L
Format 3.78LT
N° d'article 87005059
N° de modèle 142.0019200.007
★★★★★ ★★★★★
3,9
(22)
CABOT
Teinture colorée d'extérieur pour terrasses et parements Cabot, à base d'huile, translucide, 3,78 L
Format 3.78LT
N° d'article 87005061
N° de modèle 142.0019202.007
★★★★★ ★★★★★
3,9
(22)
CABOT
Fini pour bois à base d'huile Australian Timber de Cabot, bois ambré, translucide mat, 3,78 L
Format 3.78LT
N° d'article 87005066
N° de modèle 142.0019457.007
★★★★★ ★★★★★
3,7
(208)
OLYMPIC
Teinture et scellant deux-en-1 pour bois Olympic Maximum, transparent, brun, 3,78 L
Format 3.78L
N° d'article 63575200
N° de modèle 56405C/01
★★★★★ ★★★★★
1,8
(6)

Can this be applied over Thompson clear oil stain

Posée par: Blacky123456
Don't know for sure, but probably not: Thompson clear oil stain will probably prevent the stain from penetrating the wood.
Répondue par: Sheria
Date de publication: 2021-04-17

What is minimum timeframe to apply prior to rain 

Posée par: Monk1
hello read the instructions on the can
Répondue par: michael john
Date de publication: 2021-06-05
  • y_2021, m_10, d_15, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_fr_CA, sid_87005064, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 4ms
  • QUESTIONS, PRODUCT
Fini pour bois à base d'huile Australian Timber de Cabot, naturel, translucide, 3,78 L est évalué 3.7 de 5 de 204.
Rated 2 de 5 de par Must Apply This Properly Or It Looks Terrible I applied this to a pine deck that had no previous protection and was installed 3 years ago.  After cleaning the deck with a wood cleaner (and letting it dry 3 days) I applied Cabot Australian Timber Oil with a roller.  The finish looks terrible with lap marks galore.  I wish the directions would warn against the use of a roller (as the Cabot help line did).  Now my only option is to let it wear off over time and endure the terrible look, or use a stripper.  Stripping takes a lot of effort (using the recommended Cabot product) but I don't know if I can bear to look at this every day.
Date de publication: 2013-09-05
Rated 1 de 5 de par Doesn't hold up We loved Cabot timber oil the first time we applied it to our cedar deck, However, when it was time to refresh the application, you could tell the formula had changed. We followed the directions exactly, prepped the surface as directed with the products recommended, even sanded to make sure that all prior product was removed. The new coat didn't make a year before it started looking worn, peeling, etc. Now we are left with a large deck that has to be refinished again. I don't know anyone that has time to refinish their deck from scratch every season -a maintenance coat would be ok, but to have to strip it every year is ridiculous! It seems that according to all the other recent reviews, we aren't the only ones having the same issues!
Date de publication: 2019-03-17
Rated 4 de 5 de par So far so good... Trying Cabots Timber Oil for the first time on a 3 year old cedar deck. This product was recommend by our local paint store. So far so good. Will check back next season for a follow up review. Original stain, applied when wood was new, has been removed and boards have been cleaned and sanded. Tried three colors and found one we liked. The first is boards in the corner are treated with Natural, then Mahogany Flame and last, Jarrah Brown.
Date de publication: 2018-06-19
Rated 5 de 5 de par Stain on my cedar deck By far the best stain I have ever used on my cedar deck. I have used the Behr (twice) and Benjamin Moore and both began to crack and peel after our harsh Canadian winter. I was almost giving up and going composite top boards until I was referred to this product by a neighbour. We had our harshest winter in years and have just hosed down my deck after applying Cabot a year ago. Glad to say the deck looks like I just stained it. I will definitely keep using this. Highly recommended!
Date de publication: 2014-04-13
Rated 5 de 5 de par Excellent finish-right way and wrong way There is a right way to apply this product and I followed other poster's tips. 1. Strip, clean, and sand. I stripped and cleaned deck, it didn't look uniform, so I sanded with 60 grit and finished with 100 grit-that accepts the stain better because the wood pores are opened up. 2. Stain one board at a time the entire length using a paint shield in between boards to prevent overlap marks. Wipe off extra stain immediately. This stuff drys fast so long runs wipe as you go up until the wet edge (maintain a wet edge). Finish a second wipe with a clean rag. 3. If you follow these instructions-no blotchy shiny finish, no overlap marks, drys in 24 hours. The deck has to be absolutely dry to finish so it really needs to be bone dry for at least 3 days after cleaning. sand with at least 100 grit before finishing to get better penetration. One coat only!! Hope this helps!
Date de publication: 2016-05-27
Rated 4 de 5 de par Great Product Used this product on my mahogany front porch. It was easy to apply and the coverage is great. I chose the semi transparent stain, used two coats and it really highlights the grain of the wood. The only downside is the smell. It has a very strong odor of linseed oil. It's been three days now and the odor doesn't seem to be lessening much. The porch has a roof over it (but is not enclosed) which is probably the reason it still smells so strong. I hope it goes away soon as my neighbors who are attached to my house are complaining and I have to keep my windows closed and the temperature is in the high 80's. All in all as far as coverage and looks I'm happy with this product.
Date de publication: 2017-08-03
Rated 1 de 5 de par Does not do well with IPE wood !!!! Used one coat because of the thick natural of this Brazilian Hardwood . After letting it dry for 4 days I figured it was good to go ! Big mistake everywhere where I put the furniture it left it's mark . Took everything off the deck again and will give it three more days to dry . Temperatures here have been in the 90s in the days and the air dry . I spoke to the local Hardware Rep. who ran an article that stated this oil was good of this type of wood . My suggestion would be not to use on a very hardwood period. I will never veer away from Messer U.V. Plus (natural) again especially on hardwoods .
Date de publication: 2017-07-12
Rated 5 de 5 de par Excellent finish for redwood! After much research and a few calls to Cabot, I settled on the Australian Timer Oil in Neutral for our new redwood deck. I had to act quickly, as redwood "blondes out" on its way to grey (or "pearl" as some like to call it) when the sun has its way with it here in on the Central Coast of Calif. We managed to get 1000+ sq. ft. done in a day, and while it was chore for two of us, I really like how it came out. How long it stays this way or what it will look like in year, I cannot say, but I am glad I put in the effort. I think the pictures speak for themselves, so thanks Cabot for a great product.
Date de publication: 2015-04-23
Rated 5 de 5 de par Great Product - Very Satisfied Results New deck built, with high quality pine for framing, western redwood posts, cedar for the flooring. I used Australian Timber Oil, and couldn't believe how easily it went on. We all know that no two pieces of lumber are the same. So I expected some deviations on how the wood would take the stain. I am old fashion so I used a good brush, waited two weeks, buffed the treated wood with steel wool, and applied a second coat. It looks like a million bucks. I would highly recommend this product. By the way, I'm near San Antonio with lots of sun and 100 plus degree days.
Date de publication: 2020-10-04
Rated 5 de 5 de par Applied to 25 yr old redwood deck. I used this product as a "last chance" for my old redwood deck. I had previously used some waterproofing products, but never a stain and haven't minded the weathered grey color. However, it was just looking dirty and lab retriever dogs tracks all over it didn't help. I used a dark mahogany stain and after powerwashing and letting it dry for almost a week I applied. I could not be more pleased. The finish is not like a product that lays on the surface, it is a deep, rich and matte finish. I did the deck last spring and it has gone through a MN winter and looks just as good as when I applied it. If I have to reapply in another year...so what, it is less money then replacing the 25 yr old deck.
Date de publication: 2015-04-05
Rated 5 de 5 de par BEST EXTERIOR WOOD FINISH EVER! AUSTRALIAN TIMBER OIL OUTPERFORMS all of the many products available. I've used it on a hardwood deck (Brazilian Tiger-wood) and Cedar garage door and cedar deck railing. I have used almost every product known to man, including Behr, Olympic, Pennofin, etc, etc. You name it and I have used it. And I have never been satisfied until I found Australian timber Oil. After 8 years on my Garage Door, it was still looking good, but I touched it up and it looks great as it has for a very long time. It is an amazingly easy product to apply and it continues to look great for years and years.
Date de publication: 2014-05-11
Rated 1 de 5 de par natural on mahogany looks orange NOT NATURAL After restoring an old victorian home we put on a new mahogany wrap around porch,sanded completely then stained with australian timber oil natural. What a mistake, Has an orange tint and did not dry. stayed tacky, I actually took paint thinner and washed as much of the sticky surface off as I could.Not really sure what I'll do now. Its a shame after all the time and effort I put in this project to have to deal with such a lousy product . Very disappointed but I'm sure cabots will tell me it was improper application.....I THINK NOT...
Date de publication: 2016-08-11
Rated 1 de 5 de par WHAT A DISASTER OF A PRODUCT Ive been in the paint business close to 30 years, and I know everything there is to know about surface prep, product options, and benefits. After I took my time and did everything according to what needs to be done (including making sure the wood was completely dry) I applied this product. It never last 1 year! Peeled all over, faded, and it looked so terrible. What a great product they once sold, but I must presume that you eased on the quality, in order to turn a higher profit. It's just such a shame. I have no other option to advise people to use another product because I have no trust in what you offer.
Date de publication: 2021-06-02
Rated 4 de 5 de par Love the oil but...... it is unforgiving. If you don't follow all the prep and are not careful with application it will look sloppy. It did not hold up as well as I'd hoped on a new Redwood Deck that gets full sun, after 1 year I had to redo all over again. To be fair I live in the rainy northwest and had a lot of mold build up. But our front deck that is shaded has lasted a long long time.....been here 13 years and have only had to reseal front deck twice in all that time. Hoping the back deck will improve over time, only reason I didn't give it a 5 star at this time.
Date de publication: 2016-07-01
Rated 5 de 5 de par Best [This review was collected as part of a promotion.] I usually buy behr deck stain 6 year that usually lasts. 1 year. This last deck all faded horribly and peeled up in spots I always thought it was my prep that was having bad results. Even with deck cleaners and trying for the best application with these products ive gotten bad results I’ve tried other brands I did a job using Olympic stain which turned out bad and I didn’t get paid cause I agreed with the homeowner it was bad. Last deck that usually takes 6 gallons of stain took 2 gallons of Cabot’s and turned out great, homeowner and myself agree this was the best stain ever and actually cost cheaper for the deck than using other brands that don’t last.
Date de publication: 2019-05-20
Rated 4 de 5 de par This stuff is awesome!!! Recently bought a house with a front deck that went 3 years without any treatment. Used a pressure washer and wood cleaner for prep. It’s pretty dry where we live (Wyoming) so I let the deck dry for only 24hrs. Used an applicator and a good brush for the tight spots. Clean up was super simple with mineral spirits. The results where outstanding!
Date de publication: 2020-05-26
Rated 5 de 5 de par Great Product - Need to Apply Correctly This is a great product if properly applied. Proper application means: (a) Surface Condition; (b) Weather; (c) Application Tools; (d) Application Process. Check out my photos. This is an IPE deck that has only been stained with Australian Timber Oil ("ATO") -- no other product has been used on this deck. While this deck looks shiny, more like a film based coating than an oil based coating, it is NOT sticky ! If you want the deck to be weather protected and not sticky, while beautiful, then you need to understand the overall process. This deck was stained in 3 separate operations, each after a period of time for weathering to allow the surface to accept more stain. We anticipate that after building up the ATO, that future staining will be an annual process: One gallon of material was sufficient for one coating of the deck in the picture. A. Step 1. After we installed this deck, we let it bake in the Texas sun in June through early July (about 3 weeks). The Texas sun is brutal. If you live in Oregon, this 3 week time frame may be quite a few weeks. After this fading in the Texas sun, using a sparing application of Natural ATO with a staining brush and wiping cloth. B. Step 2, after 4 more weeks to the brutal Texas summer sun fading and aging the deck, it again got another coat of Natural ATO. This time, allowing a little more time for the ATO to soak in before wiping off. C. Step 3, after 6 weeks more weeks of Texas sun fading and oxidizing the surface, it was given a final coat. This final coat, was 50% Natural mixed with 50% Mahogany Flame. This combination brought the IPE very close to it's original color, except with a brilliance and water resistance in the surface layer. The 3rd coat was applied with a stain pad on a stick and worked into the surface after being sprayed onto the deck with a pump up deck sprayer. The edges and trim areas were done with a brush. Wiping rags were used after each small area was well worked with the wiping pad on a stick. We should note that after Step 2, the deck experienced heavy rains for almost 10 days after hurricane Harvey. Water pooled up nicely on the deck surface, showing the ATO was doing it's job. However, the water exposure and weeks of Texas sun had once again faded the surface -- an indication that the deck would now accept more stain. Here's some notes on the process: (a) Surface Condition - the wood in the deck needs to be able to uptake the product and to bond to the surface. This means weathering some due to sunlight fading and damaging the surface on a microscopic scale and the weathering due to rain. The trick is to arrest the aging with a new application of ATO, after just enough aging takes place to allow the deck to absorb the next coat of stain. (b) Weather - you need to plan for drying time after washing, without dew or rain; you need to apply it not in direct sunlight (early morning; in shade; etc). Then you need the sun to come out and "crosslink" and thus polymerize the surface of the ATO once the stain is applied and has been wiped clear of pools of ATO on the surface. (c) Application Tools - brush intended for stain (not a paint brush); wiping cloths (For coat No 3, we used a stain pad on a wooden handle, along with wiping cloths). (d) Application Process - 1. CLEANING / DRYING - We then cleaned the deck with a garden hose (not a pressure washer) and Murphy's oil soap. A deck squeegee is useful to push the excess water off. A driveway broom can be used to scrub the soapy water onto the deck. With the brutal Texas sun, 2 days of drying is sufficient. Further north, you may need another day or two. 2. APPLICATION - .here it's about applying ATO in a series of small areas, with overlapping wet edges - somewhat like painting. However, one key to avoiding a sticky mess is do not allow it to pool for long periods of time. Basically, just apply and wipe up the excess. In Step 1, wipe fairly quickly. Likewise, Step 2 is wiped with just a tad more absorption time. Step 3, we work it into the deck with the stain pad on a stick for 2-3 minutes (each time in an area of 3-4 boards x 8 feet or so), then wipe. Brush is also used in Step 3 around trim and edges. 3. ALLOWING CURING WITHOUT TRAFFIC - Let the sun cross link it good. For example, apply in the morning and then allow full sunlight to do it's thing with the deck that afternoon. The deck surface should NOT be sticky when opened for traffic. WHAT NOT TO DO: 1.DO NOT allow ATO to pool up on the surface for many minutes. 2. DO NOT try to spread ATO on the whole deck, then come back and wipe. Do small overlapping areas and apply / wipe as you go. 3. DO NOT apply in cold or inclement weather where the ATO has no chance of cross linking (polymerizing) the linseed oil. You need to give it full sunlight (while applying it in diminished light). 4. DO NOT apply slowly in full sunlight. You are cooking up a sticky mess. 5. DO NOT apply to a deck that is not fully dry. Wiping up surface water or dew with a rag the morning of the application is not sufficient. It needs serious time in the sun to fully dry. In the first application, we applied Natural ATO with a brush intended to stain. Since this new wood was still oil rich on the inside, we wiped the ATO off rather quickly with "wiping cloths."
Date de publication: 2017-09-17
Rated 5 de 5 de par At Last!! I'm a general contractor, and for years I've been fighting the battle between natural vs. composite, or maintenance-free-and-lame vs. beautiful-requires-recoating when it comes to fence and deck. Finally, a natural product that has serious wood protection properties, ease of application, rare recoating, and the awesome smell of those natural linseed and tung oils from my childhood. Leave your chemicals behind and come back to this natural oil product!!
Date de publication: 2013-11-13
Rated 3 de 5 de par Professional question Have used many Cabot products for years. First day with Aussie timber oil. Excellant product. Mahogany porch floor with roof. Sanded and refinished (120 grit). Weathering varied from none at the front door ( milling marks still visable ) to totally cupped gray ( really weathered ). Found it best to paint the stuff on and wipe off the excess not too far behind the application ( 10 min. @ 60 degrees) for the solid wood. The weathered wood ( even after sanding ) required two flood coats and no wiping. I wonder if these particular long oil alkyds have no recoat window?
Date de publication: 2017-04-18
Rated 5 de 5 de par So far so good First go we had used Behr and it failed horribly..so much in fact that I was refunded. Everyone should know that PREP is 99% of the process. So we used the stripper and power washer and sanded like crazy people. (this wasnt easy considering we are older) Did the front deck last year and this year tackled the back one finally! While my husband was busy on the back deck, I went out front wiped down the deck and applied another coat. Easy breezy application. I have to say that so far WE LOVE this product. To do it right you need to take your time. We have two HUGE decks and over 500 baulesters...Port Orford Cedar...we had a freak snow storm this past Feb/March and it held up, We are trying to beat the rains and so far I can say Im very happy with the product
Date de publication: 2019-10-15
Rated 2 de 5 de par Great for gazebos, horrible on decks. Used this product the year before on my cedar gazebo and it still looks great two years later. Last year I used the same Cabot 'Natural' Australian timber oil for my new cedar deck. I prepped the deck beforehand with a Cabot wood prep product and sanded all the deck boards ahead of time too. After one winter it looks horrible. Will not be using this again. The only reason I gave the value and quality of this product a "fair" mark was because of my gazebo results.
Date de publication: 2014-06-02
Rated 1 de 5 de par Algae after only one year; very disappointed When we first bought our house 10 years ago my brother-in-law recommended Australian Timber Oil for our deck which needed staining. It held up incredibly well. Last year of course went back to Australian Timber Oil b/c of how well it held up. I read the application instructions multiple times and followed cleaning directions and now less than a year later the deck has algae anywhere it is in the shade for any substantial length of time. I am super disappointed and confused as to what happened. I did some looking online and found other people with similar praise from the past turned into utter disappointment. I read some sources saying Cabot changed the formula some years ago. So, don't bother with this product. Do some research and find one that will hold up better.
Date de publication: 2017-07-23
Rated 5 de 5 de par Amazing product! Last month I needed the deck in a hurry. So we went out and got the cheapest wood possible. While the posts and the deck itself were made with pretreated wood the rails in the bumpers mermaid with the crappiest Splinter wood you could find! I knew better than to treat the railing directly with the timber oil so in the hottest weather of the year I decided to pretreat with raw linseed oil first. Keep in mind everything was new so I did know wood stripping for cleaning of any kind. I'm glad I pretreated with the raw linseed oil if anyone here is complaining that the Cabot Australian Timber oil didn't go as far as they planned the most likely their wood was very very dry and you needed to pre-treat. Now I know nobody ever says to pre-treat with another oil when using these products but if you want to save a lot of money time and product then do yourself a favor pretreat with raw linseed oil. Anyway after I pretreated I waited one day and then proceeded to put the Amber Australian Timber oil on the deck we used a combination of brushes and rollers and probably broke every rule they said to do. The deck came out amazing! I've never seen wood bead up after a rainstorm like this wood does! When it rains I literally use a squeegee to get the pooling water off! Oh and because I pretreated I only used 1/4 of a gallon on this deck!
Date de publication: 2018-08-30
Rated 5 de 5 de par Fantastic I used this on ceder lap siding over 4 years ago and it is looking just beautiful. The siding get some sun, or just tons of moisture due to trees. It just keeps going and I don't see a reason to re-coat for several more years. I don't understand the roller idea. It is a stain and stains you use a brush or a pad. Love this stuff, many people i met in the home improvement business have all recommended it and so do I.
Date de publication: 2014-10-09
Rated 5 de 5 de par First time staining! Bought Australian Timber Oil in Jarrah Brown and Semi-Solid stain in Cordovan Brown. Cleaned deck board and deck rails with recommended cleaner. Filled small holes and gaps with wood putty and sanded all deck boards and rails with 80 grit sand paper. Added Cordovan Brown to deck rails and posts and Jarrah Brown to top rail cap and deck boards. We love it!!!
Date de publication: 2017-10-07
Rated 5 de 5 de par Great on siding Applied this after a very labor intensive re-finish of cedar siding that had been coated with Thompsons water seal. Given the amount of work it took to restore the siding, I was nervous about the durability. So far (2 years) it is holding up very well in the Anchorage, Alaska climate and looks great. I am able to purchase the oil-formulated stain here, which I suspect is superior to the non-voc formulation based on my experiences with other products. Adequate ventilation and gloves and you will be fine.
Date de publication: 2017-07-17
Rated 1 de 5 de par Disappointed I used this product for years and it was wonderful - water beaded perfectly and lasted 2-3 years, but they must have changed the formula. The last two times I used it, it's only good for one season. I now have to find some other stain. Very disappointed.
Date de publication: 2018-05-10
Rated 5 de 5 de par Excellent with lambs wool applicator First time conditioning a deck. Decided on natural timber oil. Had deck pressure washed. Began application two days later and couldn’t be happier. Application of oil was surprisingly easy and lambs wool allowed for thick coat. The deck looks great. I highly recommend this product. Could not be more pleased.
Date de publication: 2020-04-13
Rated 5 de 5 de par I absolutely LOVE this product I've been using the Australian Timber Oil for about 5 years now. My deck is now 30 years old! And in great shape. I had used other products in the past, and many times the deck went 4 to 5 years without being sealed. I finally decided to take proper care of it. We get some pretty severe weather here in Toronto. 5 years ago I gave the entire deck and railings (350sq.ft.) a very severe pressure washing to the point where it was actually leaving the wood rough in some areas. (I didn't sand the deck) I then let it dry completely for a few days and applied the Timber Oil (natural) with a brush. I applied it very liberally, let it soak in for a few minutes (the wood was 25 years old at that time and very 'thirsty') them went over it again while it was still wet. The results were fantastic! I got a deep, rich golden finish. In some areas, I got hazing where I had over-applied it, but after letting it cure for a few days I just took the hose to it and the haze washed away. I did not re-apply the next year. Year 3 I did a light pressure wash and re-applied with a brush. I did nothing in year 4. This year I just sprayed the deck down with the hose to remove any surface dirt, let it dry thoroughly, and re-applied with a roller. So much easier than getting on your hands and knees to brush it on. I used a medium quality low-pile roller; I've learned from past experience that you do not need a heavy coat. The deck once again looked fantastic. A deep, golden, finish with a sleight sheen. Now, you have to be realistic. Especially in areas with hash climates. When the Timber Oil is freshly applied, my deck (remember, 30 years old) looks like it was just installed. Over the course of the summer the 'sheen' of the freshly applied finish disappears. This does not mean that the finish is gone. it's still there in the wood protecting it. Horizontal surfaces, especially where you are walking on them, will loose their sheen a lot faster than vertical surfaces. I didn't need to re-coat my railings this year, and probably won't next year, because the finish still looks like it is freshly applied. Next spring I'll hose the deck down and re-apply a thin coat on the deck with a roller. an easy job that will only take me 1/2 day for my 350 sq.ft. deck. And the deck will look brand new again. Year 31. I love this stuff!
Date de publication: 2019-11-04
Rated 5 de 5 de par Great Job Purchased Cabot Australia Timber Oil a few weeks ago after applying one coat, very pleased with the results on back wood deck. My deck was resurfaced last year and this year I applied the oil. If anything I would apply one more coat of oil end of summer, but if still looks good I hope to get the recommended time of 2-3 years before recoating back deck. I used a sprayer which worked great and smoothed just after with a wide soft paint brush, which worked out great. Highly recommend only put only if warm day or cloudy day otherwise if to much sun shining on your project to use oil the oil will be very gummy to work with!
Date de publication: 2020-06-09
  • y_2021, m_10, d_15, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasreviews, tv_1, tr_203
  • loc_fr_CA, sid_87005064, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 7ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin