Fini pour bois à base d'huile Australian Timber de Cabot, teck miel, translucide, 3,78 L

N° d'article 87005068 N° de modèle 142.0019458.007 Format3.78LT
Fini pour bois à base d'huile Australian Timber de Cabot, teck miel, translucide, 3,78 L
 

Caractéristiques

Utilisations recommandées pour terrasses extérieures en bois, parement, clôtures, garde-corps, marches, meubles extérieurs en bois, pour les substrats en bois seulement. Cabot australian timber oil est un mélange unique d'huiles formulées à l'origine pour protéger les bois denses d'Australie, tels que le tallowwood, le cambara et le merbau, contre des expositions extrêmes. Il s'agit d'un traitement à l'huile translucide éprouvé et spécialement formulé pour les terrasses et les meubles extérieurs. Pénètre profondément dans le bois pour accentuer la profondeur et la patine du bois naturel. Contenant un mélange précis d'huile de lin de qualité superbe pour une pénétration maximale, d'alkydes longs en huile pour la durabilité et d'huile de tung (huile de bois de chine) pure pour la profondeur de couleur et l'imperméabilité à l'eau, elle offre une protection à l'huile à triple action. accessoire ou indirect.

Spécifications techniques

Modèle :Australian timber oil Couleur :Teck miel Fini :Mat COV :275 g/l. Format :3,78 l. Superficie :250-350 pi.ca Opacité :Translucide Protection ultra-violets (O/N) :Oui Hydrofuge (O/N) :Oui Intérieur/Extérieur :Extérieur Composante :Base d'huile

Produits fréquemment achetés ensemble

SIMMS
Pinceau à peinture Simms, manche en plastique, poils épais et longs en polyester, 5 po l.
Format 125MM
N° d'article 01585145
N° de modèle 1960-5
★★★★★ ★★★★★
5
(2)
CIRCA 1850
Gants de décapage
Format MEDIUM
N° d'article 0776252
N° de modèle 130101
★★★★★ ★★★★★
0
(0)
SICO
Décapant pour bois 3.78L
Format 3.78L
N° d'article 50316492
N° de modèle 802-111-3.78L
★★★★★ ★★★★★
2
(6)
THOMPSON'S WATERSEAL
Imperméabilisant multisurfaces Thompson's WaterSeal, clair, faible COV, 9,45 L
Format 9.45LT
N° d'article 14495278
N° de modèle THCP40011-02
★★★★★ ★★★★★
3,3
(58)
SICO
Nettoyeur-raviveur-conditionneur pour bois Sico, extérieur, 3,78 L
Format 3.78L
N° d'article 50317179
N° de modèle 771-333A 3,78L
★★★★★ ★★★★★
0
(0)
TECHNISEAL
Décapant à teinture pour bois Techniseal, à base d'eau, sans grattage, 4 L
Format 4L
N° d'article 7924057
N° de modèle 144-544
★★★★★ ★★★★★
3
(4)
SIMMS
Ensemble pour teinture et peinture Simms, pinceau de 3 po l., plateau, 2 manchons, manche
Format 5MX
N° d'article 01585190
N° de modèle S575
★★★★★ ★★★★★
0
(0)

Vous pourriez aussi aimer

SICO
Revêtement d'extérieur pour bois Sico, translucide, chêne, à base d'huile, semi-lustré, 3,78 L
Format 3.78L
N° d'article 50316478
N° de modèle 236-580-3.78L
★★★★★ ★★★★★
4,1
(15)
OLYMPIC
Teinture et scellant imperméabilisant pour bois d'extérieur Olympic Maximum, à base d'eau, clair, 3,78 L
Format 3.78L
N° d'article 63575201
N° de modèle 56400C/01
★★★★★ ★★★★★
3,8
(8)
SICO
Revêtement d'extérieur pour bois Sico, translucide, séquoia, à base d'huile, semi-lustré, 3,78 L
Format 3.78L
N° d'article 50316480
N° de modèle 236-780-3.78L
★★★★★ ★★★★★
4,5
(11)
OLYMPIC
Teinture et scellant deux-en-1 pour bois Olympic Maximum, imperméabilisant, cèdre naturel, 3,78 L
Format 3.78L
N° d'article 63575202
N° de modèle 56403C/01
★★★★★ ★★★★★
2,3
(7)
CABOT
Fini pour bois à base d'huile Australian Timber de Cabot, naturel, translucide, 3,78 L
Format 3.78L
N° d'article 87005064
N° de modèle 142.0019400.007
★★★★★ ★★★★★
3,7
(216)
CABOT
Fini pour bois à base d'huile Australian Timber de Cabot, brun de Jarrah, transparent, 3,78 L
Format 3.78LT
N° d'article 87005072
N° de modèle 142.0019460.007
★★★★★ ★★★★★
3,7
(209)
CABOT
Fini pour bois à base d'huile Australian Timber de Cabot, acajou enflammé, translucide, 3,78 L
Format 3.78LT
N° d'article 87005070
N° de modèle 142.0019459.007
★★★★★ ★★★★★
3,7
(212)
SAMAN
Teinture et vernis en une étape pour bois d'intérieur Saman, à base d'eau, charbon, faible COV, 946 ml
Format 946ML
N° d'article 72645226
N° de modèle SAM-320-1L
★★★★★ ★★★★★
0
(0)
CABOT
Teinture colorée d'extérieur pour terrasses et parements Cabot, à base d'huile, translucide, 3,78 L
Format 3.78LT
N° d'article 87005061
N° de modèle 142.0019202.007
★★★★★ ★★★★★
3,9
(22)
CABOT
Teinture colorée d'extérieur pour terrasses et parements Cabot, à base d'huile, hydrofuge, 3,78 L
Format 3.78LT
N° d'article 87005059
N° de modèle 142.0019200.007
★★★★★ ★★★★★
3,9
(22)
CABOT
Fini pour bois à base d'huile Australian Timber de Cabot, bois ambré, translucide mat, 3,78 L
Format 3.78LT
N° d'article 87005066
N° de modèle 142.0019457.007
★★★★★ ★★★★★
3,7
(207)
OLYMPIC
Teinture et scellant deux-en-1 pour bois Olympic Maximum, transparent, brun, 3,78 L
Format 3.78L
N° d'article 63575200
N° de modèle 56405C/01
★★★★★ ★★★★★
1,8
(6)

Has anyone used this product on IPE or similar exterior deck Hardwood. How does it compare to IPE Oil ?

Posée par: Randy 173
I don’t know what IPE is, but I LOVE this product on my pretreated deck and gazebo. I won’t use anything else. Beautiful finish
Répondue par: GammyOrange
Date de publication: 2020-09-01
  • y_2021, m_9, d_23, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_87005068, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Fini extérieur pour terrasses et parements Cabot, transparent, teck miel, 3,78 l est évalué 3.7 de 5 de 200.
Rated 5 de 5 de par Great Product I re-finished a deck that was dark grey and black from mold, dirt and neglect. I scrubbed it clean so it looked like wood again and applied Cabots Australian Timber Oil Jarrah Brown to the floor, seats and top plate on rail, I painted the rail slats to match house color. This was in 2011 yikes today I have started scrubbing the deck and will re- apply the same stain again, it probably should have been done a bit sooner but it has been 7 yrs. and this deck was not in great shape to begin with but I really think ATO saved my deck.. The photo is of it being washed and how it looked after over 7 yrs of Iowa weather. It will look new when I'm done again.
Date de publication: 2018-06-07
Rated 4 de 5 de par Stained the deck Did all the required prep and used a non-air commercial sprayer to apply. Went on smoothly and dried completely in 48 hours.Over sprayed many plants. Rinsed off what I could and only had a few leaves, no plants, that died. Sprayed steel anti-slip grid and dried in 12 hours. Sprayed the anodized aluminum rails to preserve the color and after 4 weeks they are still tacky. The wood has a slight orange tint, but the wood grain shows excellently. I asked for clear and was sold the #9400 Australian timber oil (natural). I'd purchase again and recommend to anyone, except for the anodized aluminum.
Date de publication: 2013-08-08
Rated 2 de 5 de par Disappointing I've used Cabot Australian Timber Oil #9458 stain on my deck starting in 2008. Super durability and very satisfied. After 8 years it needed staining again. I was forced to use the same product but different chemical make up. (#19548) In 2017 I had it redone again because I had replaced some boards. Enter 2019 and it needs to be stained again! I did the required steps in prepping it every time it has been done. Not very durable! And a very disappointing product. I will offer a word of advice to others, Spraying or rolling may be quick but brushing is the best way to apply it to a deck surface especially if you have gaps between your boards.
Date de publication: 2019-06-14
Rated 5 de 5 de par Easy to apply and looks great I used the Honey Teak color of this stain on a pergola I built behind my New Orleans home.  The lumber is simple pressure treated pine which I sanded with 120 grit sandpaper before I applied the stain.  This is the first time I ever used any kind of stain so I used a lambswool applicator for best results.  I was careful to wipe it repeatedly with the applicator to even the application out and take up any excess.  I found it took about three days before the stain was fully cured and no longer tacky.  I couldn't be happier with the results.  I can't imagine why anyone uses cedar or other premium price wood when this stain makes pine look so good !
Date de publication: 2013-09-17
Rated 1 de 5 de par Color, Finish, Stains are not what I was expecting Bought this weekend to apply to a new deck installed late spring. Used a pad applicator for the first coat and every single spot I lifted the applicator left a dark mark, and other dark sections. Some sections barely took any color and stayed light. The Honey Teak is about 10 shades darker than the sample on pine. The finish is almost a like a urethane you would see on a wooden bartop from the 80's. Upon applying a second coat, there were areas the stain wasn't able to soak in and let what looks like droplets. It's absolutely horrible. Bob Vila's site promoted this as the best option for a new deck and I couldn't be any more disappointed.
Date de publication: 2020-09-21
Rated 5 de 5 de par Rich, Deep Color I am very happy I used the Australian Timber Oil, Honey Teak color, for my new deck. At first the color seemed darker than I expected, but now that it's done, I really like it. It has a rich, deep, burnished, and expensive look and also a nice sheen. My deck is 17x19 and 2nd floor, so I had railing, stairs, and underneath to do also, and I used exactly 5 gallons. I expected to use 2 gallons based on the stated 400-600 square foot coverage, so I guess my wood really soaked it up. I waited 5 months after building to apply it.
Date de publication: 2012-05-23
Rated 1 de 5 de par Poor results I sanded my pressure treated deck down to remove all prior stain/water repellant product. Power washed it to remove the grit and dust. Let the wood dry for 3 days and then applied Jarrah Brown Australian Timber Oil as recommended. While wet it looked fine but after drying it was blotchy and after going through a winter it is dull. It does repel water nicely. I am extremely disappointed after going to all the time and trouble of sanding the deck to have it turn out like this. I would not recommend this product. Any suggestions on how to fix the blotchy appearance would be greatly appreciated.
Date de publication: 2016-05-22
Rated 1 de 5 de par NEW FORMULA - AVOID AT ALL COSTS I've been purchasing Australian Timber Oil (Natural) for my IPE hardwood deck for a # of yrs. now. Loved IT!! I live in Canada where harsh winters can play havoc on a deck. When applied, the product would last very well for more than 2 years before requiring another coat. Now they've changed the formula of the product and it is completely ineffective. Would not recommend this to ANYONE with hardwood. Suggest Messmers - products are outstanding and formula remains unchanged. After putting Australian Timber Oil on a test patch this year, it lasted less than one week in the full sun before fading significantly.
Date de publication: 2015-06-05
  • y_2021, m_9, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_197
  • loc_fr_CA, sid_87005068, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin