FORET À BOIS

Article#02445111 Modèle#3041002C Format5/8x6"
FORET À BOIS
 

Caractéristiques

Pour percer dans le bois. Les mèches Speedbor Max sont les mèches les plus rapides de la gamme Speedbor.

Vous pourriez aussi aimer

BOSCH
Foret pour verre et tuiles, 1/4 po
Format 1/4"
Article #19835551
Modèle #GT300
★★★★★ ★★★★★
1
(4)
BOSCH
Foret pour verre et tuiles, 3/16 po
Format 3/16"
Article #19835550
Modèle #GT200
★★★★★ ★★★★★
1
(1)
BOSCH
Foret pour verre et céramique, 5/16''
Format 5/16"
Article #19835552
Modèle #GT400
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble de forets pour carreaux de verre
Format 4MX
Article #19835447
Modèle #GT2000
★★★★★ ★★★★★
3,3
(3)
BOSCH
FORET À BÉTON
Format 5/32x6"
Article #1983025
Modèle #HC2001
★★★★★ ★★★★★
3,6
(14)
BOSCH
FORET À BÉTON
Format 5/32x6"
Article #13545467
Modèle #HCBG
★★★★★ ★★★★★
1
(2)
BOSCH
Forets plats standards Daredevil, 3 pièces
Format 3MX
Article #19835693
Modèle #DSB5003
★★★★★ ★★★★★
0
(0)
BOSCH
FORET À BÉTON
Format 3/16x3"
Article #13545469
Modèle #HCBG03
★★★★★ ★★★★★
5
(1)
BOSCH
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt
Format 1/8x2 3/4"xPK2
Article #13545442
Modèle #TI2135
★★★★★ ★★★★★
0
(0)
BOSCH
FORET À BÉTON
Format 3/16x6"
Article #1983026
Modèle #HC2011
★★★★★ ★★★★★
4,4
(16)
BOSCH
Foret plat Daredevil(TM) régulier, 1'' x 6''
Format 1"
Article #19835690
Modèle #DSB1013
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à biseau large de Bosch(MC),1 ½''
Format 1/2x10"
Article #19835046
Modèle #HS1425
★★★★★ ★★★★★
4,9
(8)
BOSCH
Foret à maçonnerie Bosch, 1/4" x 6", acier au carbone
Format 1/4x6"
Article #19836321
Modèle #LBHX004
★★★★★ ★★★★★
1
(1)
BOSCH
FORET À BÉTON
Format 3/16x6"
Article #13545470
Modèle #HCBG04
★★★★★ ★★★★★
5
(2)
BOSCH
Foret à maçonnerie Bosch, 3/16" x 6", acier au carbone
Format 3/16x6"
Article #19836320
Modèle #LBHX003
★★★★★ ★★★★★
5
(2)
BOSCH
Foret à métal en cobalt, 1/8'' x 2 3/4''
Format 1/8x2 3/4"
Article #19835213
Modèle #CO2135
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat allongé Daredevil, 3/4" x 16"
Format 3/4"x16"
Article #19835683
Modèle #DLSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Embout de tournevis carré
Format #2x6"
Article #19835339
Modèle #CCSQ2601
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble de forets Bosch à usages multiples, oxyde d'or, 29/bte
Format 29/BT
Article #19836336
Modèle #GO29
★★★★★ ★★★★★
1
(1)
BOSCH
Foret plat Daredevil(TM) régulier, 3/4'' x 6''
Format 3/4"
Article #19835687
Modèle #DSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/4'' x 6''
Format 1 1/4"
Article #19835691
Modèle #DSB1017
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/2'' x 6''
Format 1 1/2"
Article #19835692
Modèle #DSB1021
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à métal avec revêtement titane, 3/16'' x 3 1/2''
Format 3/16x3 1/2"
Article #13545446
Modèle #TI2139
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à métal avec revêtement titane, 3/32'' x 2 1/4'', 2/pqt
Format 3/32x2 1/4"xPK2
Article #13545440
Modèle #TI2133
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat allongé Daredevil, 1" x 16"
Format 1"x16"
Article #19835684
Modèle #DLSB1013
★★★★★ ★★★★★
0
(0)

Spécifications techniques

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
FORET À BOIS est évalué 4.2 de 5 de 25.
Rated 5 de 5 de par Tri-Flute Drill Bit woodboring I used this bit to install and anchor land scape timbers in a large project.Approximatley 2500 liner feet each timber was 8 ft long with anchor holes drilled through every 2 feet.rebar rods were hammered through the holes to keep them in place.Then a second timber was nailed to the top of each timber.This bit never dulled.and was used the next day to drill anchor holes in a deck railing.20ft long 12 feet wide.The bit is still sharp. I have since purchased 6 addition sizes for other projects we are doing in Oct,Nov.This is a very fast bit and would recommend it to anyone building decks,swings,landscape structures etc. Bob [This review was collected as part of a promotion.]
Date de publication: 2018-09-23
Rated 1 de 5 de par Lost the bit with the first hole! I drilled into a tree for the treehouse I was building. On the first hole, I could not extract the bit--it would not back out- in reverse, forward, and/or straining myself to the max and I am a big strong man. The bit is still in the tree!! Tried a 1/2" of same design - controlling the boring very slowly and carefully. After half drilled, it pulled itself in to the max and would not come out, so now two of these brand new and expensive bits are permanently stuck in the tree!!!!! Hey Irwin----a heads up would have been nice!!! It may be ok for some other uses--but NEVER drill into a live tree. You will be going back to the store for old fashioned 2 blade wood bits..... R Sp-->
Date de publication: 2013-06-24
Rated 4 de 5 de par Nice Bit This was a good bit. I bought it to bore out holes in a header board so I could plug them and then remount a sliding barn door. The bit was smooth and made a much cleaner hole then a traditional paddle bit does. I would definitely recommend this bit. The only nock I had against it is that it could get a little squirrelly on you if your not paying attention but that's how it is with a lot of things. also not I was using this bit on softwood and have not used it enough times to comment on durability. [This review was collected as part of a promotion.]
Date de publication: 2019-04-02
Rated 5 de 5 de par Dentist likes his drill, In my office I use the finest carbide and diamond drills in my high speed handpieces for painless dental care. In my work shop, I demand the same quality and performance. That’s why I choose Irwin Products and my 5/8- inch drill bit performs with excellence. Its tri flutes are super sharp and balanced for a clean, vibration free result...and NO! I don’t use workshop drill bits in my dental practice! [This review was collected as part of a promotion.]
Date de publication: 2019-02-28
Rated 4 de 5 de par As advertised I was not sure how this bit would do with my 1.5 amp battery on my cordless drill, but I was suprised at how easy the 5/8” bit chewed through the wood with a full battery. Drill did eventually end up getting hot, so I switched to the plug in drill and had no issues. Bit stayed sharp boring about 50 holes through 4x4 treated lumber. [This review was collected as part of a promotion.]
Date de publication: 2019-06-23
Rated 1 de 5 de par Looks pretty but don't expect it to do anything I bought this "fasted speedbor ever" drill bit to drill a hole in the fence post. Once the tip got into the wood, it stopped and wouldn't turn at all. I returned it and got a regular 5/8 drill bit and it got the job done without a problem. This one might work if you were drilling through soft wood, but not if you want it to do any real work.
Date de publication: 2014-02-16
Rated 3 de 5 de par Tri-Flute Drill Bit Very few 5/8' wood drill bits available but had to settle for a tri-flute bit. Would preferred a 3/8" shank instead 1/4" shank. Too much tear-out. Preferred a wood twist drill bit but the store did not have any in stock. [This review was collected as part of a promotion.]
Date de publication: 2018-08-26
Rated 5 de 5 de par Irwin 5/8 drill bit Needed a long 5/8 in drill bit for hiding a wifi router cable behind a cabinet. I then used it to drill several holes in decking to release a water blockage. Worked great on the different materials I had to drill thru. [This review was collected as part of a promotion.]
Date de publication: 2019-06-27
  • y_2020, m_3, d_31, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_fr_CA, sid_02445111, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin