FORET À BOIS

N° d'article 02445113 N° de modèle 3041005C Format7/8x6"
FORET À BOIS
 

Caractéristiques

Pour percer dans le bois. Les mèches Speedbor Max sont les mèches les plus rapides de la gamme Speedbor.

Spécifications techniques

Vous pourriez aussi aimer

MAKITA
Ensemble d'embouts et douilles de tournevis, 38 pièces
Format ST37
N° d'article 11975372
N° de modèle T-03078
★★★★★ ★★★★★
0
(0)
MAKITA
Jeu de mèches plates courtes, 8 pièces
Format 8MX
N° d'article 11975426
N° de modèle T-02973
★★★★★ ★★★★★
0
(0)
MAKITA
Ensemble de forets à tige ronde, 1/16" à 1/2", 18 pièces
Format 18MX
N° d'article 11975427
N° de modèle T-03006
★★★★★ ★★★★★
0
(0)
MAKITA
Accessoires pour tournevis à chocs 84 mcx
Format 84MX
N° d'article 11975247
N° de modèle M-00147
★★★★★ ★★★★★
2,7
(3)
MAKITA
Ensemble de forets hélicoïdaux, 6 pièces
Format ST6
N° d'article 11975371
N° de modèle T-02989
★★★★★ ★★★★★
0
(0)
MAKITA
Ensemble d'embouts et forets, 71 pièces
Format 71MX
N° d'article 11975353
N° de modèle B-50273
★★★★★ ★★★★★
0
(0)
MAKITA
Ensemble forets et embouts, 70 pièces, oxyde/titane
Format 70MX
N° d'article 11975358
N° de modèle T-01725
★★★★★ ★★★★★
0
(0)
BOSCH
Foret pour verre et tuiles, 1/4 po
Format 1/4"
N° d'article 19835551
N° de modèle GT300
★★★★★ ★★★★★
2,3
(6)
Embout de tournevis EAB Tool coloré, tête carrée 6" #2, industriel, recyclable
Format #2x6"
N° d'article 34595567
N° de modèle 83265
★★★★★ ★★★★★
0
(0)
Cartouche d'embouts EAB Tool (2 pièces) colorés, tête carrée 2" #2, industriel, recyclable, 10/pqt
Format #2x2"x10MX
N° d'article 34595588
N° de modèle 96032
★★★★★ ★★★★★
0
(0)
DEWALT
Embouts pour tournevis Dewalt, 37 pièces
Format ST/37
N° d'article 0794509
N° de modèle DW2173
★★★★★ ★★★★★
4,1
(11)
BOSCH
Ensemble de forets pour carreaux de verre
Format 4MX
N° d'article 19835447
N° de modèle GT2000
★★★★★ ★★★★★
3,5
(4)
CRAFTSMAN
Jeu de 14 forets à métal, oxyde noir à revetement doré
Format 14MX
N° d'article 00276913
N° de modèle CMAM2214
★★★★★ ★★★★★
4,5
(78)
BOSCH
Foret pour verre et céramique, 5/16''
Format 5/16"
N° d'article 19835552
N° de modèle GT400
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Embout de tournevis EAB Tool coloré, tête carrée 4" #2, industriel, recyclable
Format #2x4"
N° d'article 34595558
N° de modèle 83226
★★★★★ ★★★★★
0
(0)
BOSCH
FORET À BÉTON
Format 5/32x6"
N° d'article 1983025
N° de modèle HC2001
★★★★★ ★★★★★
3,7
(15)
EXCHANGE-A-BLADE
Cartouche de douilles EAB Tool assorties Impact, industriel, recyclable, 2", 5/pqt
Format 2"x5MX
N° d'article 09325002
N° de modèle 98095
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Embout de tournevis EAB Tool coloré, tête carrée 2" #2, industriel, recyclable
Format #2x2"
N° d'article 34595562
N° de modèle 83239
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à maçonnerie Bosch, 3/16" x 6", acier au carbone
Format 3/16x6"
N° d'article 19836320
N° de modèle LBHX003
★★★★★ ★★★★★
5
(4)
BOSCH
Foret à maçonnerie Bosch, 5/32" x 6", acier au carbone
Format 5/32x6"
N° d'article 19836319
N° de modèle LBHX002
★★★★★ ★★★★★
3
(1)
BOSCH
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt
Format 1/8x2 3/4"xPK2
N° d'article 13545442
N° de modèle TI2135
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à maçonnerie Bosch, 1/4" x 6", acier au carbone
Format 1/4x6"
N° d'article 19836321
N° de modèle LBHX004
★★★★★ ★★★★★
3
(4)
BOSCH
Foret pour verre et tuiles, 3/16 po
Format 3/16"
N° d'article 19835550
N° de modèle GT200
★★★★★ ★★★★★
1
(1)
EXCHANGE-A-BLADE
Embout de tournevis EAB Tool coloré, tête carrée 2 3/4" #2, industriel, recyclable
Format #2x2 3/4"
N° d'article 34595564
N° de modèle 83247
★★★★★ ★★★★★
0
(0)
DEWALT
Foret à maçonnerie Dewalt, SDS Plus, 5/32" x 4 1/2"
Format 5/32x4 1/2x6 1/2
N° d'article 00275071
N° de modèle DW5401
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
FORET À BOIS est évalué 4.5 de 5 de 29.
Rated 5 de 5 de par Use an above-average drill and hold on tight Needed to run a new circuit and was facing drilling holes in 20 floor joists, some of the doubles. Didn't want to spend all day doing it, so bought this bit on a suggection from a friend at work. Holy schnikies. First tried my 14V Ryobi, beacuse it is my shortest drill to get between the joists with. As soon as the flutes hit the wood, it stopped dead. Charged up the Craftsman 14.4V, it only got about 1/4" into the wood and stopped. Cleaned the cobwebs off my only corded drill, a Craftsman 3 amp, 3/8" chuck. It worked, but really bogged it down. This is the absolute minimum drill one could use with this bit. Even with the low RPMs of a bogged down drill, it about snapped my wrist and still went through the joist in about 3 seconds, with no pushing by me. Almost like I had put a ahotgun up to the wood and blasted a hole through it, no joke. So, use a significant corded drill, and get your wrist locked. Only thing I have to say that's negative, is I wouldn't use this if I wanted a nice, clean exit hole. It broke out some good size splinters on the backside of each joist.
Date de publication: 2015-02-07
Rated 5 de 5 de par Pulls too fast This drill bit (7/8" speedbor) was exactly what I needed. The tip functions like a screw and bites into the wood. As it turns the screw tip digs deeper into the wood pulling the bit with it. The bit is sharp and seems to be of very good quality. My only issue is that the tip pulled the bit too fast for my drill. I have a Craftsman 19.2v cordless. The drill easily starts the screw tip into the wood, but it digs too deep too fast for the drill to handle. When the tri-tip cutting blades start cutting the 7/8" hole, it bogs down and stops the drill. I compensated for this by drilling a pilot hole and inserting the screw tip in the hole. Without anything for the tip to bite into, I was able to adjust how much pressure to apply to the cutting blades. It worked quick and easily.
Date de publication: 2014-03-10
Rated 1 de 5 de par The cutting edge dulled after < 50 holes bored through pine lumber which was disappointing. I have bore bits that are 15 - 20 years old that still function as they were designed and readily bore through anything they are used. The bit was not worth the price
Date de publication: 2014-05-27
Rated 5 de 5 de par Must have for any drill kit. [This review was collected as part of a promotion.] Absolutely blasts clean holes through lumber. I am an electrician and wire houses on a regular basis. After I have ran through a house with an electric hole hog. I keep this chucked in my hand drill while I am running wires,in case I missed any studs,top plates,etc. I've bout the entire case but I frequently the 3/4 and 7/8. I've drilled several hundred holes with these. They don't like nails very much,but I don't know many bits that do.
Date de publication: 2018-10-15
Rated 2 de 5 de par 7/8 inch bit, but also not. I purchased this because I needed something to help more easily make holes that fit a certain tube diameter. It definitely makes holes in wood very easily, but compared to 2 other 7/8 inch bits I was using, this one is about a millimeter larger, measuring just over 22.3mm for the hole. It's useless for me now because it's too big for the deck balusters I've already purchased.
Date de publication: 2020-06-04
Rated 5 de 5 de par Better than any paddle bit I had to drill thru numerous studs while remodeling and running electrical wiring. After trying a paddle bit of the same size I thought there has to be a better and faster way. The Tri-Flute drill bit drills so fast that you have to back off the forward push a little. I used a regular corded drill but a cordless would work as well
Date de publication: 2016-11-17
Rated 5 de 5 de par Water Oak [This review was collected as part of a promotion.] I bought this to anchor 14” long 7/8” diameter bolts into a solid love water oak tree... not only did it work amazing, but it didn’t clog or anything! Made boring through solid wood a breeze. All you really have to do is hang on to the drill and it does the rest quick.
Date de publication: 2019-04-14
Rated 5 de 5 de par Great Drill Bit [This review was collected as part of a promotion.] It's a very nice drill bit. It bores quick and clean holes. I was surprised at how it pretty much pulls itself though wood. I'm very happy with the purchase and I would definitely recommend this to a friend, in fact, I already have.
Date de publication: 2019-06-29
  • y_2021, m_4, d_12, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_fr_CA, sid_02445113, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin