Forêt à bois Speedbor d'Irwin, 7/8 po dia. x 6 po L., tige hexagonale 1/4 po, cannelures de 2 5/8 po, dégagement rapide

N° d'article 02445113 N° de modèle 3041005C Format7/8x6"
Forêt à bois Speedbor d'Irwin, 7/8 po dia. x 6 po L., tige hexagonale 1/4 po, cannelures de 2 5/8 po, dégagement rapide
 

Caractéristiques

Effectuer diverses tâches de coupe du bois à l'aide de ce foret à trois pointes Speedbor. Conçu en acier rapide, il offre une vitesse de coupe élevée. Idéal pour une utilisation sur le bois, il est doté d'une tige de 1/4 po. Vendu à l'unité, le foret à bois mesure 6 po de long.

  • Les éperons de coupe ont trois tranchants pour une durabilité accrue
  • L'embout à vis pleine permet au foret de s'auto-alimenter
  • Conception à trois goujures pour une éjection plus rapide des copeaux
  • La tige hexagonale rainurée empêche le glissement dans le mandrin de la perceuse ou dans la rallonge du foret, elle s'adapte à tous les mandrins à changement rapide standard de 1/4 pouce

Spécifications techniques

Garantie :Aucune Garantie de base sur la main-d'oeuvre (mois) :0 Garantie de base sur les pièces (mois) :0 Diamètre de l'embout :7/8 po Diamètre de l'embout (po) :7/8 po Longueur de l'embout :6 po Type d'embout :Foret à triple cannelure Marques/modèles compatibles :Tous Type de boîtier/coffret :S.O. (aucun étui) Convient au métal :Non Convient au bois :Oui Peut être utilisé avec :Outil électrique Matériau :Acier à coupe rapide Quantité par emballage :1 Remplacement rapide :Oui Nom de la gamme :S.O. Ensemble/à l'unité :Individuel Grosseur des dents/de la tige :1/4 po Type de tige :Hexagonal Sous-marque :SPEEDBOR

Vous pourriez aussi aimer

DEWALT
Jeu de 37 embouts de tournevis DeWalt, acier, étui de protection rigide, embouts assortis
Format ST/37
N° d'article 0794509
N° de modèle DW2173
★★★★★ ★★★★★
4,2
(13)
DEWALT
Ensemble de mèches DeWalt, pointes en croix 135 degrés, étui noir et jaune, 13 pièces
Format 13MX
N° d'article 00275548
N° de modèle DW1163
★★★★★ ★★★★★
4,8
(4)
BOSCH
Ensemble de forets pour verre et carrelage Bosch, 4 pièces, pointe au carbure, à 3 faces droites
Format 4MX
N° d'article 19835447
N° de modèle GT2000
★★★★★ ★★★★★
3,5
(4)
EXCHANGE-A-BLADE
Cartouche de douilles Exchange-A-Blade, 2 po, tailles assorties, acier S2, paquet de 5
Format 2"x5MX
N° d'article 09325002
N° de modèle 98095
★★★★★ ★★★★★
0
(0)
SPYDER
Ensemble de forets Stinger de Spyder, 10 pièces, acier rapide, tige de 1/4 po
Format 10MX
N° d'article 65165074
N° de modèle 19017CA
★★★★★ ★★★★★
2
(1)
Cartouches d'embouts de tournevis industriels assortis EAB, couleurs assorties, acier allié, 2 po L.
Format 2"x10MX
N° d'article 34595589
N° de modèle 96042
★★★★★ ★★★★★
0
(0)
Cartouche d'embouts de tournevis à code couleur EAB, carré no 2, 2 po, paquet de 10
Format #2x2"x10MX
N° d'article 34595588
N° de modèle 96032
★★★★★ ★★★★★
0
(0)
QUIK DRIVE
Vis à sous-couche de bois en bande Strong-Drive MTH par Quik Drive, no 7 x 1-1/4 po, phosphate gris, 2500/bte
Format #7x1 1/4"xBT2500
N° d'article 3919004
N° de modèle MTH114S
★★★★★ ★★★★★
0
(0)
BOSCH
Foret au carbure pour carreaux en pierre naturelle 1/4 po de Bosch, 1 unité
Format 1/4"
N° d'article 19836377
N° de modèle NS300
★★★★★ ★★★★★
3,9
(32)
BOSCH
Racleur de couvre-plancher en acier noir Bulldog de Bosch, 5 x 11 po
Format 5"x11"
N° d'article 19836583
N° de modèle HS1418
★★★★★ ★★★★★
4,8
(5)
SPYDER
Arbre de scie emporte-pièce Spyder, 1-paquet, 1 1/4 à 7 8/8 po x 1/2 po
Format 1/2"
N° d'article 65165293
N° de modèle 600634P
★★★★★ ★★★★★
3,7
(24)
DEWALT
Ensemble de 14 mèches assorties à pointe rapide en titane DEWALT
Format 14MX
N° d'article 00277787
N° de modèle DW1341
★★★★★ ★★★★★
4,6
(157)
DEWALT
Ensemble de forets assortis DeWALT en acier rapide, pour droitier (14/pqt)
Format 14MX
N° d'article 00277659
N° de modèle DWA1184
★★★★★ ★★★★★
4,7
(213)
Embout de tournevis carré industriel rouge EAB, acier allié recyclable, tige hexagonale 1/4 po, no 2, 6 po
Format #2x6"
N° d'article 34595567
N° de modèle 83265
★★★★★ ★★★★★
0
(0)
IRWIN
Foret nº 9 à 2 étages Unibit d'Irwin, 7/8 et 1 1/8 po, acier rapide
Format 1/2"x7.5"
N° d'article 02445479
N° de modèle IWAS10239DF
★★★★★ ★★★★★
4,3
(23)
BOSCH
Ensemble de forets au carbure pour carreaux en pierre naturelle Bosch, 4 pièces
Format 4MX
N° d'article 19836381
N° de modèle NS2000
★★★★★ ★★★★★
3,4
(76)
BOSCH
Foret pour marteau perforateur en acier Bulldog 1 x 18 po de Bosch, 1 unité
Format 1"x18"
N° d'article 19836484
N° de modèle HC4C2167
★★★★★ ★★★★★
5
(4)
BOSCH
Foret pour marteau perforateur en acier Bulldog 5/32 x 6 po de Bosch, 1 unité
Format 5/32"x6"
N° d'article 19836486
N° de modèle HC4C2001
★★★★★ ★★★★★
4,2
(14)
BOSCH
Foret à carrelage pour marteau perforateur Bulldog de Bosch, 1 1/2 po l. x 10 po L., SDS Plus, acier
N° d'article 19835555
N° de modèle HS1465
★★★★★ ★★★★★
4,9
(52)
BOSCH
Foret pour marteau perforateur en acier Bulldog 3/4 x 18 po de Bosch, 1 unité
Format 3/4"x18"
N° d'article 19836481
N° de modèle HC4C2127
★★★★★ ★★★★★
5
(2)
EXCHANGE-A-BLADE
Porte-embout Exchange-A-Blade à changement rapide 12", industriel, recyclable
Format 12"
N° d'article 09065000
N° de modèle 94894
★★★★★ ★★★★★
0
(0)
BOSCH
Foret de perceuse pour béton Bulldog Bosch, tige hexagonale, SDS Plus, 6 1/2 po L.
Format 3/16x4x7"
N° d'article 19835548
N° de modèle HC2312
★★★★★ ★★★★★
3,8
(9)
BOSCH
Foret pour marteau perforateur en acier Bulldog 3/4 x 12 po de Bosch, 1 unité
Format 3/4"x12"
N° d'article 19836493
N° de modèle HC4C2124
★★★★★ ★★★★★
4,9
(10)
EXCHANGE-A-BLADE
Mandrin à ressort industriel pour scie emporte-pièce EAB, 3/8 po dia, tige hexagonale, acier
Format 3/8"
N° d'article 34595828
N° de modèle 1054532
★★★★★ ★★★★★
0
(0)
IRWIN
Foret à 12 étages no 4 Unibit d'Irwin, acier rapide, 3/16 à 7/8 po
Format 3/16"-7/8"
N° d'article 02445478
N° de modèle IWAS10234DF
★★★★★ ★★★★★
4,5
(8)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Forêt à bois Speedbor d'Irwin, 7/8 po dia. x 6 po L., tige hexagonale 1/4 po, cannelures de 2 5/8 po, dégagement rapide est évalué 4.5 de 5 de 29.
Rated 5 de 5 de par Use an above-average drill and hold on tight Needed to run a new circuit and was facing drilling holes in 20 floor joists, some of the doubles. Didn't want to spend all day doing it, so bought this bit on a suggection from a friend at work. Holy schnikies. First tried my 14V Ryobi, beacuse it is my shortest drill to get between the joists with. As soon as the flutes hit the wood, it stopped dead. Charged up the Craftsman 14.4V, it only got about 1/4" into the wood and stopped. Cleaned the cobwebs off my only corded drill, a Craftsman 3 amp, 3/8" chuck. It worked, but really bogged it down. This is the absolute minimum drill one could use with this bit. Even with the low RPMs of a bogged down drill, it about snapped my wrist and still went through the joist in about 3 seconds, with no pushing by me. Almost like I had put a ahotgun up to the wood and blasted a hole through it, no joke. So, use a significant corded drill, and get your wrist locked. Only thing I have to say that's negative, is I wouldn't use this if I wanted a nice, clean exit hole. It broke out some good size splinters on the backside of each joist.
Date de publication: 2015-02-07
Rated 5 de 5 de par Pulls too fast This drill bit (7/8" speedbor) was exactly what I needed. The tip functions like a screw and bites into the wood. As it turns the screw tip digs deeper into the wood pulling the bit with it. The bit is sharp and seems to be of very good quality. My only issue is that the tip pulled the bit too fast for my drill. I have a Craftsman 19.2v cordless. The drill easily starts the screw tip into the wood, but it digs too deep too fast for the drill to handle. When the tri-tip cutting blades start cutting the 7/8" hole, it bogs down and stops the drill. I compensated for this by drilling a pilot hole and inserting the screw tip in the hole. Without anything for the tip to bite into, I was able to adjust how much pressure to apply to the cutting blades. It worked quick and easily.
Date de publication: 2014-03-10
Rated 1 de 5 de par The cutting edge dulled after < 50 holes bored through pine lumber which was disappointing. I have bore bits that are 15 - 20 years old that still function as they were designed and readily bore through anything they are used. The bit was not worth the price
Date de publication: 2014-05-27
Rated 5 de 5 de par Must have for any drill kit. [This review was collected as part of a promotion.] Absolutely blasts clean holes through lumber. I am an electrician and wire houses on a regular basis. After I have ran through a house with an electric hole hog. I keep this chucked in my hand drill while I am running wires,in case I missed any studs,top plates,etc. I've bout the entire case but I frequently the 3/4 and 7/8. I've drilled several hundred holes with these. They don't like nails very much,but I don't know many bits that do.
Date de publication: 2018-10-15
Rated 2 de 5 de par 7/8 inch bit, but also not. I purchased this because I needed something to help more easily make holes that fit a certain tube diameter. It definitely makes holes in wood very easily, but compared to 2 other 7/8 inch bits I was using, this one is about a millimeter larger, measuring just over 22.3mm for the hole. It's useless for me now because it's too big for the deck balusters I've already purchased.
Date de publication: 2020-06-04
Rated 5 de 5 de par Better than any paddle bit I had to drill thru numerous studs while remodeling and running electrical wiring. After trying a paddle bit of the same size I thought there has to be a better and faster way. The Tri-Flute drill bit drills so fast that you have to back off the forward push a little. I used a regular corded drill but a cordless would work as well
Date de publication: 2016-11-17
Rated 5 de 5 de par Water Oak [This review was collected as part of a promotion.] I bought this to anchor 14” long 7/8” diameter bolts into a solid love water oak tree... not only did it work amazing, but it didn’t clog or anything! Made boring through solid wood a breeze. All you really have to do is hang on to the drill and it does the rest quick.
Date de publication: 2019-04-14
Rated 5 de 5 de par Great Drill Bit [This review was collected as part of a promotion.] It's a very nice drill bit. It bores quick and clean holes. I was surprised at how it pretty much pulls itself though wood. I'm very happy with the purchase and I would definitely recommend this to a friend, in fact, I already have.
Date de publication: 2019-06-29
  • y_2023, m_11, d_30, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_fr_CA, sid_02445113, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 6ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin