Foret cobalt Dewalt, 1/2''

Article#00276348 Modèle#DWA1232 Format1/2"
Foret cobalt Dewalt, 1/2''
 

Caractéristiques

Le foret de marque Dewalt est construit pour la vitesse et une longue vie, passant facilement et efficacement à travers les métaux durs. La mèche est munie d'une pointe en point de scission qui permet au foret de commencer le travail au contact et élimine la marche du trépan. Le cobalt à usage intensif offre une durée de vie 4 fois supérieure à celle de l'oxyde noir. L/embout livre une vitesse maximale et une durabilité aux applications d'acier inoxydable et autres métaux. Ce produit est couvert par une garantie de satisfaction de 30 jours.

Spécifications techniques

Composante :Cobalt Diamètre :1/2'' (1,27 cm) Emballage :1 Unité Garantie :Garantie de satisfaction de 30 jours Utilisations :Métaux Type de pointe :Point de scission

Vous pourriez aussi aimer

BOSCH
Foret pour verre et tuiles, 1/4 po
Format 1/4"
Article #19835551
Modèle #GT300
★★★★★ ★★★★★
1
(4)
BOSCH
Forets plats standards Daredevil, 3 pièces
Format 3MX
Article #19835693
Modèle #DSB5003
★★★★★ ★★★★★
0
(0)
BOSCH
FORET À BÉTON
Format 5/32x6"
Article #1983025
Modèle #HC2001
★★★★★ ★★★★★
3,6
(14)
BOSCH
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt
Format 1/8x2 3/4"xPK2
Article #13545442
Modèle #TI2135
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à maçonnerie Bosch, 3/16" x 6", acier au carbone
Format 3/16x6"
Article #19836320
Modèle #LBHX003
★★★★★ ★★★★★
5
(2)
BOSCH
FORET À BÉTON
Format 5/32x6"
Article #13545467
Modèle #HCBG
★★★★★ ★★★★★
1
(2)
BOSCH
Ensemble de forets pour carreaux de verre
Format 4MX
Article #19835447
Modèle #GT2000
★★★★★ ★★★★★
3,3
(3)
BOSCH
Embout de tournevis carré
Format #2x6"
Article #19835339
Modèle #CCSQ2601
★★★★★ ★★★★★
0
(0)
BOSCH
Foret pour verre et céramique, 5/16''
Format 5/16"
Article #19835552
Modèle #GT400
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à métal en cobalt, 1/8'' x 2 3/4''
Format 1/8x2 3/4"
Article #19835213
Modèle #CO2135
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à métal avec revêtement titane, 3/32'' x 2 1/4'', 2/pqt
Format 3/32x2 1/4"xPK2
Article #13545440
Modèle #TI2133
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 1'' x 6''
Format 1"
Article #19835690
Modèle #DSB1013
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/2'' x 6''
Format 1 1/2"
Article #19835692
Modèle #DSB1021
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/4'' x 6''
Format 1 1/4"
Article #19835691
Modèle #DSB1017
★★★★★ ★★★★★
0
(0)
BOSCH
Foret pour verre et tuiles, 3/16 po
Format 3/16"
Article #19835550
Modèle #GT200
★★★★★ ★★★★★
1
(1)
BOSCH
Embout de tournevis carré
Format #2x3"
Article #19835354
Modèle #SQ2301
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à maçonnerie Bosch, 5/32" x 6", acier au carbone
Format 5/32x6"
Article #19836319
Modèle #LBHX002
★★★★★ ★★★★★
0
(0)
BOSCH
FORET À BÉTON
Format 3/16x6"
Article #1983026
Modèle #HC2011
★★★★★ ★★★★★
4,2
(17)
BOSCH
Ensemble de forets Bosch à usages multiples, oxyde d'or, 29/bte
Format 29/BT
Article #19836336
Modèle #GO29
★★★★★ ★★★★★
1
(1)
BOSCH
Foret plat allongé Daredevil, 3/4" x 16"
Format 3/4"x16"
Article #19835683
Modèle #DLSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 3/4'' x 6''
Format 3/4"
Article #19835687
Modèle #DSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à biseau large de Bosch(MC),1 ½''
Format 1/2x10"
Article #19835046
Modèle #HS1425
★★★★★ ★★★★★
4,9
(8)
BOSCH
Foret à maçonnerie Bosch, 1/2" x 6", acier au carbone
Format 1/2x6"
Article #19836324
Modèle #LBHX010
★★★★★ ★★★★★
4,3
(19)
BOSCH
Foret à maçonnerie Bosch, 3/8" x 6", acier au carbone
Format 3/8x6"
Article #19836323
Modèle #LBHX008
★★★★★ ★★★★★
4,4
(31)
BOSCH
Foret à maçonnerie Bosch, 5/16" x 6", acier au carbone
Format 5/16x6"
Article #19836322
Modèle #LBHX006
★★★★★ ★★★★★
4,5
(14)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Foret cobalt Dewalt, 1/2'' est évalué 4.1 de 5 de 22.
Rated 5 de 5 de par Does a great job. I purchased this drill bit after having quite a bit of trouble drilling through a heavy steel assembly. Rather than waste money on a generic black oxide bit that probably would have done the job but no more I chose to bite the bullet and get the best bit I could get. I chose this cobalt steel bit in the hope that I would drill the hole and still have a useable bit. Well the bit work great cutting through the steel like butter with minimal pressure. The bit seems to be unaffected. The only down side is the cost of the bit but to tell the truth I will likely buy other bits as I need them even given the cost.
Date de publication: 2015-09-28
Rated 5 de 5 de par Great bit for hardened steel. Working on a steel project. My bits were just spinning on this steel. Borrowed friends larger drill and his steel bits but again no luck. Broke down and stopped spinning my wheels and drove to Lowes. Bought this bit and it went through the steel in seconds! I used a light oil to keep the bit tip oiled. This is a great bit. It also has a 3/8 chuck end so it fit in my Dewalt 8-Amp 3/8-in Keyless Corded Drill did a great job. If you are working with steel and need a 1/2" hole, this is the bit.
Date de publication: 2016-02-23
Rated 5 de 5 de par Great bit, but... These bits are awesome! I drilled through multiple pieces of cold rolled steel and the frame of my old pickup. The only problem I had, is that I broke 2 of them while drilling the frame. I want to emphasize that this is not a fault in the bit. This is misuse on my part, if you will. Will drilling the steel stock, I used a bench vice and kept the drill steady. Drilling the frame, however, made this difficult. Be careful of angles and catching with the bit. It wasn't the first, second or even third catch that broke the bit. I eventually lost count. I'm just glad the bit gave out before my wrist did. :) Overall, awesome product! I fully intend on purchasing another 1/2 inch, plus other sizes to be able to more easily do metal work. Again, the failure was not in the bit. It was in my usage.
Date de publication: 2017-07-09
Rated 5 de 5 de par Heavy duty drill bit Tried other drill bits to get holes drilled for a bracket in some 1/4 steel and my other bits only scratched the surface, got to hit and spin. Bought this and drilled all my holes in just a few minutes with no problem! I will be buying more as needed.
Date de publication: 2017-05-30
Rated 5 de 5 de par Like butter through strut channel galv steel Was in a bind after eating up the titanium hss bit I had trying to meet a looking deadline. Needing to get something that worked first time, without having to return to the store, I spent a little extra the cobalt bit. I was not let down - this bit did not slow down going through hole after hole in galvenized strut channel (superstrut). Must have made over 40 holes and it didn't show signs of wear. Buy the right tools for the job and it'll cost you less in time and trips to the store in the long run! [This review was collected as part of a promotion.]
Date de publication: 2019-04-14
Rated 5 de 5 de par Awesome drill bit Had to drill out lug studs to get wheels off of my car. This bit lasted long enough to drill out 2 1/2 lugs. I tried other brands that wouldn’t last long enough to drill even one lug although they were priced the same. I will purchase these bits again. [This review was collected as part of a promotion.]
Date de publication: 2019-07-28
Rated 5 de 5 de par Drill Bit That Works Excellent drill bit for exceptionally hard steel. Tried other type metal bits and they failed to penetrate galvanized steel tubing even with pilot hole. Titanium coated bits are a joke compared to cobalt. Spend a few quarters more for this drill bit. [This review was collected as part of a promotion.]
Date de publication: 2019-04-28
Rated 5 de 5 de par Did the job Was able to drill through hard steel. Ordinary bits could not. [This review was collected as part of a promotion.]
Date de publication: 2019-07-22
  • y_2020, m_6, d_2, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_fr_CA, sid_00276348, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin