Foret en titanium, Impact Ready, 1/4"

Article#00275985 Modèle#DD5116 Format1/4"
Foret en titanium, Impact Ready, 1/4"
 

Caractéristiques

Fabriqué en une seule pièce, ce foret en titane Impact Ready(MD) de DEWALT dure cinq fois plus longtemps que les forets en deux morceaux. Excellent pour percer le métal, le bois et le plastique, ce foret en titane haute performance vous permettra d'accomplir une multitude de projets. Il possède un centre conique breveté qui contribue à augmenter la force du foret pour un rendement fiable à long terme. Sa pointe Pilot Point(MD) qui démarre au contact et reste fixe, permet d'effectuer rapidement des trous propres et précis avec un patinage réduit lors de la percée.

Vous pourriez aussi aimer

BOSCH
Foret pour verre et tuiles, 1/4 po
Format 1/4"
Article #19835551
Modèle #GT300
★★★★★ ★★★★★
1
(4)
BOSCH
Foret pour verre et tuiles, 3/16 po
Format 3/16"
Article #19835550
Modèle #GT200
★★★★★ ★★★★★
1
(1)
BOSCH
Foret pour verre et céramique, 5/16''
Format 5/16"
Article #19835552
Modèle #GT400
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble de forets pour carreaux de verre
Format 4MX
Article #19835447
Modèle #GT2000
★★★★★ ★★★★★
3,3
(3)
BOSCH
FORET À BÉTON
Format 5/32x6"
Article #1983025
Modèle #HC2001
★★★★★ ★★★★★
3,6
(14)
BOSCH
FORET À BÉTON
Format 5/32x6"
Article #13545467
Modèle #HCBG
★★★★★ ★★★★★
1
(2)
BOSCH
Forets plats standards Daredevil, 3 pièces
Format 3MX
Article #19835693
Modèle #DSB5003
★★★★★ ★★★★★
0
(0)
BOSCH
FORET À BÉTON
Format 3/16x3"
Article #13545469
Modèle #HCBG03
★★★★★ ★★★★★
5
(1)
BOSCH
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt
Format 1/8x2 3/4"xPK2
Article #13545442
Modèle #TI2135
★★★★★ ★★★★★
0
(0)
BOSCH
FORET À BÉTON
Format 3/16x6"
Article #1983026
Modèle #HC2011
★★★★★ ★★★★★
4,4
(16)
BOSCH
Foret à biseau large de Bosch(MC),1 ½''
Format 1/2x10"
Article #19835046
Modèle #HS1425
★★★★★ ★★★★★
4,9
(8)
BOSCH
Foret plat Daredevil(TM) régulier, 1'' x 6''
Format 1"
Article #19835690
Modèle #DSB1013
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à maçonnerie Bosch, 1/4" x 6", acier au carbone
Format 1/4x6"
Article #19836321
Modèle #LBHX004
★★★★★ ★★★★★
1
(1)
BOSCH
FORET À BÉTON
Format 3/16x6"
Article #13545470
Modèle #HCBG04
★★★★★ ★★★★★
5
(2)
BOSCH
Foret à maçonnerie Bosch, 3/16" x 6", acier au carbone
Format 3/16x6"
Article #19836320
Modèle #LBHX003
★★★★★ ★★★★★
5
(2)
BOSCH
Foret à métal en cobalt, 1/8'' x 2 3/4''
Format 1/8x2 3/4"
Article #19835213
Modèle #CO2135
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat allongé Daredevil, 3/4" x 16"
Format 3/4"x16"
Article #19835683
Modèle #DLSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Embout de tournevis carré
Format #2x6"
Article #19835339
Modèle #CCSQ2601
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble de forets Bosch à usages multiples, oxyde d'or, 29/bte
Format 29/BT
Article #19836336
Modèle #GO29
★★★★★ ★★★★★
1
(1)
BOSCH
Foret plat Daredevil(TM) régulier, 3/4'' x 6''
Format 3/4"
Article #19835687
Modèle #DSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/4'' x 6''
Format 1 1/4"
Article #19835691
Modèle #DSB1017
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/2'' x 6''
Format 1 1/2"
Article #19835692
Modèle #DSB1021
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à métal avec revêtement titane, 3/16'' x 3 1/2''
Format 3/16x3 1/2"
Article #13545446
Modèle #TI2139
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à métal avec revêtement titane, 3/32'' x 2 1/4'', 2/pqt
Format 3/32x2 1/4"xPK2
Article #13545440
Modèle #TI2133
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat allongé Daredevil, 1" x 16"
Format 1"x16"
Article #19835684
Modèle #DLSB1013
★★★★★ ★★★★★
0
(0)

Spécifications techniques

Composante :Partie centrale en métal robuste Diamètre :1/4" (6,35 mm) Emballage :1 unité Modèle :Impact Ready(MD) Nombre de pièces :1 foret Quantité par boite :1 foret Type :Foret en titane Utilisations :Idéal pour le métal, le bois et le plastique Arbre :Tige hexagonale de 1/4" (6,35 mm) Couleur :Doré
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Foret en titanium, Impact Ready, 1/4" est évalué 4.8 de 5 de 17.
Rated 4 de 5 de par Good Quality Bosch Bit with a stepped tip This is a short bit for use with a hex driver or impact driver. I used this to drill mild steel plate. The short length does limit the depth to which you can drill. I needed the hex driver to work with an extension to work around a motor of an existing assembly. Since the steel plate was comparatively thin ~1/8" the bit length was not of material importance to me. The bit was sharp and cut aggressively. This drill has a stepped pilot diameter and is easy to hold to a spot. At the end of the 4 holes I drilled the bit did not appear to be materially dulled. While the bit is not titanium coated the basic hardness and durability of the drill bit seems quite good.
Date de publication: 2014-12-01
Rated 5 de 5 de par Worked beautifully with Dewalt 90 degree I had to fasten a 8 foot Barn Door railing for my utility room in my basement but had only 5-1/2" space between metal ducting and the wooden beam. The hole to be drilled was 2" deep x 1/4". I looked everywhere including 90 degree drills but with the drill bit inserted it was too big. The answer came in the form of Dewalt 90 degree drill attachment DWARA100 (Impact Ready) and this 1/4" Dewalt Titanium Twist drill with hex base. This drill bit is overall 3-3/16" long from tip to base and 3/4" of it fits into the DWARA 100 socket. All together the drill bit and DWARA 100 came to 4/1/2" long, so I even had 1" space extra to work in. This bit ate through the house wooden beam like butter and made a clean 1/4" hole, just perfect for the 3/8" lag bolt. Couldn't have done it without the two combination.
Date de publication: 2018-04-25
Rated 4 de 5 de par Great bit A great bit for metal. It has a pilot bore to help center the hole. The twist on the wrist doesn't exist because of the well designed beveled edge. The hex head gives it a good grip and eliminates slippage in the drill [This review was collected as part of a promotion.]
Date de publication: 2019-04-08
Rated 5 de 5 de par 1/4" Drill bit The Dewalt 1/4" Titanium drill bit was just what I needed on a recent project. Stayed sharp, drilled clean holes and followed the center punch hole well. This drill bit should be good for many more projects. [This review was collected as part of a promotion.]
Date de publication: 2018-11-06
Rated 5 de 5 de par I’m in construction and use these drill bits frequently. I use these bits for sheet metal and 1/8” metal. I have not been disappointed. I will continue to use these drill bits. [This review was collected as part of a promotion.]
Date de publication: 2018-11-26
Rated 5 de 5 de par It drilled right through an old board and metal bar with ease. I was amazed how it cut through. I was replacing boards in a trailer bed which were rotten. [This review was collected as part of a promotion.]
Date de publication: 2019-07-29
Rated 4 de 5 de par DEWALT 1/4-in Titanium Twist Drill Bit Needed a bit to drill 4, 1/4 inch holes into the legs of a cast iron table top smoker grill in order to bolt it to a table top. These bits were perfect. Easy to start each hole, bits were self tapping.
Date de publication: 2018-06-18
Rated 5 de 5 de par It works! I needed to drill several holes in sheet steel. This bit did the work quickly with little heat buildup. And it is still sharp. [This review was collected as part of a promotion.]
Date de publication: 2019-09-30
  • y_2020, m_4, d_3, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_fr_CA, sid_00275985, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin