Scie emporte-pièce 1/2 po

N° d'article 79915176 N° de modèle 12110 Format1/2"
Scie emporte-pièce 1/2 po
 

Caractéristiques

Scie emporte-pièce. 1/2 po. Pour faire des trous dans le fibraglo-ciment, les tuiles, les pierres et les matériaux abrasifs. Longue durée de vie. Coupe rapide et facile, ne requiert pas de mandrin. Garantie de 90 jours contre les défauts de fabrication. Aussi offerte en 3/4 po, 1 po, 1 1/2 po et 2 po.

Spécifications techniques

Vous pourriez aussi aimer

EXCHANGE-A-BLADE
Scie emporte-pièce diamantée Exchange-A-Blade, 1/4", échangeable
Format 1/4"
N° d'article 34595593
N° de modèle 3056002
★★★★★ ★★★★★
0
(0)
SPYDER
Ensemble de forets à bois Spyder stinger(MC) à 6 pièces, oxyde noir
Format 6MX
N° d'article 16415001
N° de modèle 11002CA
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Trousse d'installation pour verrou de porte, acier au carbone
N° d'article 00276956
N° de modèle CMAH1WDL
★★★★★ ★★★★★
3,6
(23)
DEWALT
Gabarit de perçage pour porte DeWalt(MC), acier M3
N° d'article 0027250
N° de modèle D180004
★★★★★ ★★★★★
4,2
(104)
LENOX
Scie emporte-pièce à grains de diamant, 1/4 po
Format 1/4"
N° d'article 79915272
N° de modèle 121074DGDS
★★★★★ ★★★★★
4,6
(55)
CRAFTSMAN
Ensemble de scies emporte-pièces, bi-métal, 7/pqt
Format 7MX
N° d'article 00276597
N° de modèle CMAH1SET7
★★★★★ ★★★★★
3,8
(52)
CRAFTSMAN
Scie emporte-pièce bimétallique, sans arbre, 4", noir
Format 4"
N° d'article 00276897
N° de modèle CMAH14U
★★★★★ ★★★★★
4,4
(7)
EXCHANGE-A-BLADE
Scie emporte-pièce EAB Tool bimétal (M3) Industriel, échangeable, 4 1/4"
Format 4 1/4"
N° d'article 3459090
N° de modèle 1054862
★★★★★ ★★★★★
5
(1)
BOSCH
Mandrin moyen standard pour scie emporte-pièce, 3/8 po
Format 9/16"
N° d'article 19835695
N° de modèle HSBAM
★★★★★ ★★★★★
0
(0)
BOSCH
Grand mandrin standard à deux broches, 3/8 po
Format 1 1/4x6"
N° d'article 19835696
N° de modèle HSBAMP
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 1", échangeable
Format 1"
N° d'article 34595597
N° de modèle 3056042
★★★★★ ★★★★★
0
(0)
DEWALT
Scie emporte-pièce bimétal, 4 1/4 po
Format 4 1/4"
N° d'article 0794371
N° de modèle D180068
★★★★★ ★★★★★
0
(0)
BOSCH
Scie emporte-pièce 4 1/8 po
Format 4 1/8"
N° d'article 19835326
N° de modèle HB412
★★★★★ ★★★★★
0
(0)
LENOX
Scie emporte-pièce en acier, Speed Slot, 4 1/8''
Format 4 1/8"
N° d'article 79915372
N° de modèle 2060593
★★★★★ ★★★★★
4,8
(8)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 1 1/4", échangeable
Format 1 1/4"
N° d'article 34595598
N° de modèle 3056052
★★★★★ ★★★★★
5
(1)
CRAFTSMAN
Trousse d'installation pour verrou de porte, bi-métal, 6/pqt
N° d'article 00276832
N° de modèle CMAH1MDL
★★★★★ ★★★★★
2,9
(86)
CRAFTSMAN
Arbre de scie emporte-pièce, 3/8", acier carbone
Format 3/8"
N° d'article 00276995
N° de modèle 2063303
★★★★★ ★★★★★
4,2
(16)
SPYDER
Ensemble emporte-pièce Spyder 14 pièces
Format 14MX
N° d'article 16415000
N° de modèle 600880CA
★★★★★ ★★★★★
0
(0)
LENOX
MANDRIN POUR SCIE EMPORTE-PIÈCE
Format 1 1/4-6"
N° d'article 79915269
N° de modèle 1779772
★★★★★ ★★★★★
4,7
(30)
CRAFTSMAN
Scie emporte-pièce pour luminaire encastré, bi-métal, 4"
Format 4"
N° d'article 00276918
N° de modèle CMAH34RL
★★★★★ ★★★★★
2,8
(4)
LENOX
Scie emporte-pièce à grains de diamant, 3/16 po
Format 3/16"
N° d'article 79915271
N° de modèle 121063DGDS
★★★★★ ★★★★★
4,4
(26)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 1 1/2", échangeable
Format 1 1/2"
N° d'article 34595600
N° de modèle 3056072
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 1 3/8", échangeable
Format 1 3/8"
N° d'article 34595599
N° de modèle 3056062
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 3/4", échangeable
Format 3/4"
N° d'article 34595596
N° de modèle 3056032
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 3/8", échangeable
Format 3/8"
N° d'article 34595594
N° de modèle 3056012
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Scie emporte-pièce 1/2 po est évalué 4.5 de 5 de 28.
Rated 4 de 5 de par Good but could be better. [This review was collected as part of a promotion.] I bought this bit to drill four holes into the tile back splash to install my new microwave. It worked fine and I would advise to use water to keep cool. My only complaint is not having a center pin or bit to help get it started and keep it align. You have to tilt your drill to get it started and requires a lot of effort to keep it in the right place. I understand that a bit would be hard to add to such a small hole saw. But still it would have made for a cleaner hole. Also not keeping it cool will kill the life of this hole saw. It is very expensive so keep a cup of water to dip it in as you are using it.
Date de publication: 2018-10-20
Rated 5 de 5 de par Worked to cut porcelain tile. [This review was collected as part of a promotion.] I drilled same size hole in a piece of wood with a wood bit then poured water on the hole and positioned it just where I wanted the hole on the porcelain tile. If you need several overlapping holes don't go all the way through until the last one that way water lubercated the diamond bit and you only have a little thickness left with not enough water. One bit can drill many sizes and shapes of holes. If you have an angle grinder with a diamond blade this bit can do the end of the notch for pipes.
Date de publication: 2019-08-27
Rated 5 de 5 de par Worked great I had to drill through 5/16" ceramic tile to mount shower doors. I tried other bits that did not work at all. I went to Lowes and purchased this one and it cut 8 holes and was still cutting well. I have to install one more shower door downstairs and I dont believe it would have problems cutting those holes either. On the Lenox website, there was a review that stated they had a small cup of WD-40 that they dipped their bit in every minute or so to remove the residue, cool down the bit, and lubricate the cut. I did this and it has plenty of life left. The other thing is to not put to much force behind the drill. I used the weight of my hand and let it cut its way through. It did take about 3-4 minutes per hole to cut through the tile. Holes were perfectly round, no cracking or chipping. I would recommend this without hesitation
Date de publication: 2016-11-20
Rated 5 de 5 de par Worked for Granite I am a beginner DIY and bought this to drill my 1st hole on a granite slab in kitchen. It worked very well and made a perfect hole. Started the drill by tilting 45 degrees and gradually moved to 90 degress with frequent watering to reduce heat. Overall it took an hour but end result was perfect hole.
Date de publication: 2018-03-08
Rated 5 de 5 de par [This review was collected as part of a promotion.] Works as expected. Cut holes in liquor bottles
Date de publication: 2019-12-05
Rated 1 de 5 de par Huge disappointment I purchased this drill in a 3/8-in diameter and it drilled the first two of three horizontal holes through porcelain tile very nicely using a slow speed cordless drill and water lube. On the third hole the drill went totally dull. According to the net, diamond drills should last far, far longer (up to 350 holes). I'll try another brand next time.
Date de publication: 2014-06-02
Rated 5 de 5 de par Did what I needed it to do. Purchased this to drill holes in wine bottles. Did a excellent job
Date de publication: 2011-12-26
Rated 1 de 5 de par Good for 1 Hole in hard tile. [This review was collected as part of a promotion.] Only lasted 2 holes on 3/8 pocelain tile. 1st hole took about 1 minute. 2nd hole about 5 minute. Lubricant during process. Cut 2 of the 4 holes I needed. Not designed to last unless it was meant to be used once and thrown away.
Date de publication: 2018-08-13
  • y_2021, m_2, d_22, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_fr_CA, sid_79915176, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin