Décor d'HalloweenDécorations gonflablesÉclairage et effets spéciaux Décorations d'intérieurDécorations d'extérieur

Mandrin hexagonal à angle droit DeWalt, 1/4"

Article#00277173 Modèle#DWARA120
Mandrin hexagonal à angle droit DeWalt, 1/4"
 

Caractéristiques

Les travaux de fixation et de perçage dans les endroits restreints sont un jeu d'enfant avec cet attachement de marque DEWALT avec angle à 90 degrés. Son design compact avec boîtier métallique en fait un outil robuste et performant. Le mandrin comprend un aimant qui sécurise les fixations et aide à réduire les glissades et les oscillations.

Vous pourriez aussi aimer

WORKBENCH
Extracteur à vis, spirale, 8 Morceaux
Article #330677758
Modèle #711223
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Embouts de tournevis, acier S2, Phillips, #2 x 1", 5/pqt
Format #2x1"xPK5
Article #00276840
Modèle #CMAF31PH25
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Embouts de tournevis, acier, Phillips, #2 x 1", 30/pqt
Format #2x1"xPK30
Article #00276887
Modèle #CMAF121PH230
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Brosse à fils rudes pour perceuse, 2 1/2" x 1/4", laiton
Format 2 1/2"x1/4"
Article #34595981
Modèle #2160401
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Embout carré pour visseuse à percussion, no1, 4 po
Format #1x4"
Article #34595751
Modèle #98251
★★★★★ ★★★★★
0
(0)
SIMPSON STRONG-TIE
Vis pour sous-plancher, n° 9, 1 3/4'', Boîte de 2000
Format #9x1 3/4"xBT2000
Article #35945258
Modèle #WSV134S
★★★★★ ★★★★★
0
(0)
FELO
Ensemble de tournevis isolés E-Smart, 15 pièces
Article #330608483
Modèle #063 914 06
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Embout Phillips à torsion pour visseuse à chocs, n° 1, 2"
Format #1x2"
Article #34595790
Modèle #76003
★★★★★ ★★★★★
0
(0)
FELO
Ensemble de cliquets standards, 18 pièces
Article #330608478
Modèle #057 718 56
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Embout carré pour visseuse à percussion, no2, 4 po
Format #2x4"
Article #34595752
Modèle #98253
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Brosse à fils ondulés pour perceuse, 3" x 1/4", carbone
Format 3"x1/4"
Article #34595984
Modèle # 2160413
★★★★★ ★★★★★
0
(0)
DEWALT
Cisaille à impact DeWalt, calibre 18
Article #00277175
Modèle #DWASHRIR
★★★★★ ★★★★★
4,4
(50)
CRAFTSMAN
Embouts à torsion Impact Rated(MC), 2", Phillips n° 2, 2/pqt
Format #2x2"xPK2
Article #00276843
Modèle #CMAF32PH22
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Embout carré à torsion pour visseuse, n° 2, 2", pqt de 10
Format #2x2"x10MX
Article #34595809
Modèle #75310
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Embout Phillips à torsion pour visseuse à chocs, n° 3, 2"
Format #3x2"
Article #34595792
Modèle #76011
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Embout Torx à torsion pour visseuse à percussion, T25, 2"
Format #25x2"
Article #34595814
Modèle #76327
★★★★★ ★★★★★
0
(0)

Spécifications techniques

Hauteur :8 3/4" (22,23 cm) Type :Attachement Utilisations :Bois et métal Angle :Droit Largeur :1 7/8" (4,76 cm) Profondeur :3 29/32" (9,92 cm) Mandrin :Mandrin hexagonal de 1/4" (6,35 mm) à changement rapide
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Mandrin hexagonal à angle droit DeWalt, 1/4" est évalué 4.9 de 5 de 32.
Rated 4 de 5 de par Great but could be better This is the smallest one available at Lowe’s which is great cause it fits into tight places. The only thing I would change about it is if there were an optional set screw or if the bit socket was s snap in type like on my impact driver. Cause when I’m using it to drill the bit often comes out when backing out of the hole since it’s just a magnetic socket. Other than that it’s great. If you could figure out a way to put a removable handle on it without making it any bigger, that would be great also. Maybe a stainless split screw with a band that wraps around body. [This review was collected as part of a promotion.]
Date de publication: 2019-08-28
Rated 5 de 5 de par Great for the money Although small and a bit pricey, it seems to carry all of Dewalt's quality. I have not used it very much yet, but the half dozen or so holes I have done were accomplished easily. Keep in mind that this will require bits or drivers with a hex base; it is not a chuck. [This review was collected as part of a promotion.]
Date de publication: 2019-03-07
Rated 5 de 5 de par exaxtly what i needed and worked great! I needed to secure a top to a dresser I built but my drill was too big to fit in the space. I picked this up and it worked great. It is small, which i needed, but worked with my impact gun.
Date de publication: 2019-08-15
Rated 5 de 5 de par BEST FOR A TIGHT PLACE! I have a few custom electrical boxes where I cannot use a regular screwdriver, nor screw gun. This does the job perfectly, precisely, and no effort. [This review was collected as part of a promotion.]
Date de publication: 2019-03-03
Rated 5 de 5 de par Fantastic!!!!! I love this attachment. It works much better than the flexible unit for medium to heavy tasks. I used it to drill some 1” holes in some 2x using a spade bit with ease. I was very impressed. I am buying a second one just to have it. [This review was collected as part of a promotion.]
Date de publication: 2019-05-10
Rated 5 de 5 de par Excellent Would recommend to anyone. I work in HVAC and it has come in handy many times over. Time saver. Struggle inhibitor! [This review was collected as part of a promotion.]
Date de publication: 2019-03-04
Rated 5 de 5 de par 90 Degrees of separation I had some really tough issues getting to some screws and bolts recently until I ran across this little jewel! Just attach a drill to it and waalaa! No more issues! [This review was collected as part of a promotion.]
Date de publication: 2019-05-09
Rated 5 de 5 de par Dewalt right angle attachment This has been an excellent tool on my hammer drill as I needed to to place screws in the side wall of a light recessed can. Perfect for getting into tight places. [This review was collected as part of a promotion.]
Date de publication: 2019-06-30
  • y_2020, m_1, d_24, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_32
  • loc_fr_CA, sid_00277173, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin