Niche de douche, Kerdi, 12" x 12"

N° d'article 32055038 N° de modèle KB12SN305305A Format12"x12"
Niche de douche, Kerdi, 12" x 12"
 

Caractéristiques

La niche de douche préfabriquée KERDI-BOARD-SN de 12" x 12" est faite de panneaux Schluter-KERDI-BOARD. Elle est en outre légère, étanche et facile à poser dans votre installation de douche.

Spécifications techniques

Format :12" x 12" (30,48 x 30,48 cm) Composante :Polystyrène Couleur :Orange Modèle :KERDI

Vous pourriez aussi aimer

MAPELASTIC
Membrane liquide 3,79 l
Format 3.79L
N° d'article 21085470
N° de modèle 01953
★★★★★ ★★★★★
4,6
(89)
MAPEBAND
Bande en rouleau pour plinthe
Format 3"x163'
N° d'article 2108201
N° de modèle 02401000
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Nécessaire d'installation de douche Kerdi, 38" x 60"
Format 38"x60"
N° d'article 42815037
N° de modèle KSK9651525SABS
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Bande d'étanchéité « Kerdi » pour joints et raccords sol/mur
Format 5"x16'5"
N° d'article 32055006
N° de modèle KEBA100/125/5M
★★★★★ ★★★★★
4,3
(25)
SCHLUTER SYSTEMS
Ensemble de douche Schluter Systems, 38" x 60"
Format 38"x60"
N° d'article 42815036
N° de modèle KSK9651525ABS
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Niche pour mur de douche Kerdi
Format 12"x20"
N° d'article 32055055
N° de modèle KB12SN305508A1
★★★★★ ★★★★★
4,9
(14)
MAPELASTIC
Membrane imperméable
Format 3.79L
N° d'article 2108184
N° de modèle 35553000
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Ensemble d'installation de douche Schluter Systems Kerdi
N° d'article 42815029
N° de modèle KD2FLKABS
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Ensemble de douche Schluter Systems, 48" x 48"
Format 48"x48"
N° d'article 42815035
N° de modèle KSK1220ABS
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Seuil de douche Schluter Systems, 4 1/2" x 6" x 48"
Format 4.5"x6"x48"
N° d'article 42815028
N° de modèle KBSC1151501220
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Base de douche Schluter Systems, sortie décentrée, 38" x 60"
Format 38"x60"
N° d'article 42815042
N° de modèle KST965/1525S
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Base de douche Schluter Systems, sortie centrée, 38" x 60"
Format 38"x60"
N° d'article 42815041
N° de modèle KST965/1525
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Ensemble de grille Schluter Systems Kerdi, floral, 4", inox
Format 4"
N° d'article 42815034
N° de modèle KDIF4GRKEBD5
★★★★★ ★★★★★
5
(1)
SCHLUTER SYSTEMS
Ensemble de grille Schluter Systems Kerdi, 4", acier inoxydable
Format 4"
N° d'article 42815031
N° de modèle KD4GRKE
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Ensemble de grille Schluter Systems Kerdi, 4", nickel brossé
Format 4"
N° d'article 42815030
N° de modèle KD4GRKATGB
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Ensemble de grille Schluter Systems Kerdi, 4", chrome
Format 4"
N° d'article 42815033
N° de modèle KD4GRKEP
★★★★★ ★★★★★
5
(1)
MAPELATH
Latte synthétique «Mapelath»
Format 27"x75'
N° d'article 2108180
N° de modèle 02702000
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Ensemble de 2 coins intérieurs « Kerdi-Kereck-F »
Format PK2-90DG
N° d'article 32055043
N° de modèle KERECK/FI2
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Vis et rondelles pour panneau « Kerdi », boîte de 40
Format PK40
N° d'article 32055009
N° de modèle KBZS35GT32Z
★★★★★ ★★★★★
4,6
(12)
SCHLUTER SYSTEMS
Base de douche Schluter Systems en polystyrène, 48" x 48"
Format 48"x48"
N° d'article 42815040
N° de modèle KST1220BF
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Panneau « Kerdi », endos en mousse de polystyrène
Format 32"x48"
N° d'article 32055007
N° de modèle KB121220812
★★★★★ ★★★★★
4,5
(19)
SCHLUTER SYSTEMS
Base de douche Schluter Systems en polystyrène, 36" x 36"
Format 36"x36"
N° d'article 42815038
N° de modèle KST915BF
★★★★★ ★★★★★
0
(0)
STELPRO
Membrane de désolidarisation, Stelpro, Bleu, 3,3' x 49 1/2'
Format 3.3x49.5' 5.5MM
N° d'article 03915298
N° de modèle SCU-MEM-162
★★★★★ ★★★★★
0
(0)
STELPRO
Membrane de désolidarisation, Stelpro, Bleu, 3,3' x 16,4'
Format 3.3x16.4' 5.5MM
N° d'article 03915297
N° de modèle SCU-MEM-054
★★★★★ ★★★★★
0
(0)

In a new build project, is there any additional framing requirements to accommodate this niche? I am getting ready to install the drywall. Thanks.

Posée par: kossy
If your framing is standard 16" OC and 3.5" deep than NO. However with the larger niches if you want to use them in the horizontal way, example the 12x20 niche but have the 20" going horizontal from left to right ... then yes your framing would need to be modified to accommodate the new custom size.
Répondue par: ChrisI
Date de publication: 2020-06-20

This products is specified at 12 X 12 inches. Can someone confirm if this is an "inside" measurement? Thanks.

Posée par: dougmwood
Yes .. The inside dimensions are exactly 12"x12"x3.5" however for installation reasons the outside lip/edge goes 2" further on each edge making it 16"x16" to center with your wood framing.
Répondue par: ChrisI
Date de publication: 2020-06-20

Can the niche be used on an outside wall ? Living in the cold for 6 months. If so would you just not insulate that part of the outside wall ?

Posée par: Thereds
Typically the Insulation needs to be modified/removed so NO ... but if the insulation does not get modified then YES. In most cases you can't so just install their new shower shelves.
Répondue par: ChrisI
Date de publication: 2020-06-20
  • y_2021, m_10, d_27, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_fr_CA, sid_32055038, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Niche de douche, Kerdi, 12" x 12" est évalué 4.6 de 5 de 21.
Rated 5 de 5 de par Definitely worth it! [This review was collected as part of a promotion.] This is my first time installing a niche, and it was a breeze. As lightweight as the material is, it was not fragile as I had feared. Easily installed into the wall cavity with a an extra stud installed and handful of drywall screws. Once in place, it was as rigid as the surrounding cement board. It held the thinset just fine as I adhered my tiles. The finished installation is perfectly flush and looks great!
Date de publication: 2018-09-24
Rated 5 de 5 de par Schluter Shower Niche The Schluter Shower Niche is a fabulous prodcut that provides an excellent waterproof surface to use as a location in a tiled shower to store bath products. The waterproof barrier (Kerdi Fabric) is flocked to accept any non-modified thinset for tiling the exposed surfaces. Schluter is the world's largest supplier of materials used for finishing tile installation projects. They provide over 1600 different edge profiles for tile project as well as waterproof and isolation barriers for tile installation. This prodcut comes in multiple sizes and configurations and is light-weight and yet very durable. Select your size, install and tile over for a lasting, waterproof shower niche!
Date de publication: 2015-02-25
Rated 5 de 5 de par Schluter products are great! This is a great product! So much easier to use than cement backer board. I wish I had this product for my last bathroom remodel.
Date de publication: 2018-01-13
Rated 5 de 5 de par The best product for a lifetime use Love using this ditra box. Water proof membrane guaranteed for life if properly installed. I use this on all my shower remodels. A+++
Date de publication: 2018-05-25
Rated 5 de 5 de par [This review was collected as part of a promotion.]
Date de publication: 2019-04-27
Rated 4 de 5 de par Shower water proof insert [This review was collected as part of a promotion.] Insert, level and the entire niche is waterproof and ready for tile. I've used kerdi niche on 10+ tile showers.
Date de publication: 2018-10-25
Rated 5 de 5 de par [This review was collected as part of a promotion.] Schluter makes it easy.
Date de publication: 2018-09-19
Rated 4 de 5 de par So light it could float The niche is surprisingly light, basically Styrofoam with waterproof membrains. However, it was sturdy enough to provode a steady base for the tiles. I had to cut out the backer boards 3/4 inch over the studs on each side so it could be screwed into them. The bottom floor of the niche isn't sloped to drain into the tub,so I'll have to add extra morter in the back to slope the bottom tile. It would ha e been easier with a thin flange that sits on top of the backerboard and screws through it into the studs.
Date de publication: 2021-06-29
  • y_2021, m_10, d_27, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_20
  • loc_fr_CA, sid_32055038, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin