Peinture «WaterTite»

Article#03305746 Modèle#Z05011 Format3.7L
Peinture «WaterTite»
 

Caractéristiques

Peinture pour sous-sols et maçonnerie. Anti-moisissure. Imperméabilité garantie à vie. Résiste à une pression jusqu'à 34 PSI. Fini lisse, non granuleux, facile à appliquer sur des murs secs ou humides. Formule à base d'huile à faible odeur. Blanc. 3.7 L

Vous pourriez aussi aimer

SICO
Apprêt-scelleur Sico GoPrime, latex alkyde, 3,78 l, blanc
Format 3.78LT
Article #50316648
Modèle #150-135-3.78L
★★★★★ ★★★★★
0
(0)
SICO
Apprêt-scelleur Go Prime(MD) Sico(MD), 946 ml, blanc
Format 946ML
Article #50316649
Modèle #150-135-946ML
★★★★★ ★★★★★
0
(0)
ZINSSER
Apprêt d'impression antitache Cover Stain(MD), 3,78 l, blanc
Format 3.78LT
Article #03305624
Modèle #256184
★★★★★ ★★★★★
4
(1)
ZINSSER
Apprêt d'impression antitache Cover Stain(MD), 946 ml, blanc
Format 946ML
Article #03305623
Modèle #256185
★★★★★ ★★★★★
4
(1)
ZINSSER
Apprêt bloque-taches Zinsser, B-I-N 2(MD), 946 ml, blanc
Format 946ML
Article #03305743
Modèle #261663
★★★★★ ★★★★★
0
(0)
ZINSSER
Apprêt bloque-taches Zinsser, B-I-N 2(MD), 3,78 l, blanc
Format 3.78L
Article #03305742
Modèle #261664
★★★★★ ★★★★★
0
(0)
KILZ
Apprêt-scellant intérieur Kilz Original, alkyde, 18,93 l, blanc
Format 18.93LT
Article #08405324
Modèle #10030C
★★★★★ ★★★★★
3
(4)
SOLIGNUM
Peinture de signalisation jaune
Format 3.78L
Article #31035080
Modèle #12513-4-SOL
★★★★★ ★★★★★
0
(0)
ZINSSER
Apprêt antitache, Zinsser, 18,9 L, blanc
Format 18.9LT
Article #03305622
Modèle #256188
★★★★★ ★★★★★
4
(1)
SOLIGNUM
Peinture de signalisation bleu
Format 3.78L
Article #31035076
Modèle #12713-4-SOL
★★★★★ ★★★★★
0
(0)
SOLIGNUM
Peinture de signalisation 18,9 L, jaune
Format 18.9L
Article #31035081
Modèle #12513-20-SOL
★★★★★ ★★★★★
0
(0)
SOLIGNUM
Peinture de signalisation - blanc
Format 3.78L
Article #31035078
Modèle #12413-4-SOL
★★★★★ ★★★★★
0
(0)
SOLIGNUM
Peinture alkyde de signalisation, noir
Format 3.78L
Article #31035077
Modèle #12113-4-SOL
★★★★★ ★★★★★
0
(0)
SOLIGNUM
Peinture alkyde de signalisation, blanc
Format 18.9L
Article #31035079
Modèle #12413-20-SOL
★★★★★ ★★★★★
0
(0)

Spécifications techniques

I will be waterproofing a basement concrete wall and then glueing foam slab insulation to the concrete wall with PL300. How well does this Watertite product accept the PL300 adhesive? Will it peel off and result in loss of the foam slab insulation?

Posée par: JWMT
Hi JWMT, Thank you for your question. Either Watertite product should be fine with your adhesive. We recommend testing the paint on a stir stick first. Allow for full cure, which is 7-14 days, depending on temperature and humidity. Once cured, apply your PL300 adhesive to the stick and see if it dries and sticks. If your test is successfully then you should feel confident that the adhesive will stick to the painted concrete. We hope this answers your question. Feel free to contact us again if you require further information.
Répondue par: ROAnswers
Date de publication: 2019-05-28

Can this product be used on a plywood subfloor material to add waterproof protection?

Posée par: DMK55
The Zinsser WaterTite is to be used on concrete only
Répondue par: ROAnswers
Date de publication: 2019-04-30

Is this paint tintable to a dark colour?

Posée par: Fay23
This paint cannot be tinted to a dark color
Répondue par: ROAnswers
Date de publication: 2019-03-12

Can it be applied to damp concrete basement floor before applying vinyl luxury tile? Does concrete need to be etched prior to use?

Posée par: Newbie12345
Zinsser Watertite may be used on clean, well-etched concrete subfloors (like those that will have tile, carpet, or flooring applied afterwards). Check with the vinyl tile manufactuer to ensure a waterproofer like Watertite is a suitable surface for their tiles and adhesives.
Répondue par: ROAnswers
Date de publication: 2019-02-13

Can WaterTite be applied to plaster on lath wall surface?

Posée par: RonJon
WaterTite is only meant to be applied to concrete.
Répondue par: ROAnswers
Date de publication: 2018-12-27

Can this be used outdoors on wooden spindles and porch rails?

Posée par: Ally2R
The Zinsser WaterTite is a paint that you apply directly on concrete.
Répondue par: ROAnswers
Date de publication: 2019-03-14

Can this be applied to interior part of a patio deck that is covered in Plywood and the exterior is covered with cement board.

Posée par: Librap
Zinsser Watertite is not intended for use on floors, or walking surfaces. For this reason, we would recommend Watertite be used on a patio.
Répondue par: ROAnswers
Date de publication: 2018-10-02

Can this product be tinted?

Posée par: Basil18
WaterTite Oil-Based Mould & Mildew-Proof Waterproofing Paint can be tinted to off-white and pastel tones. Maximum amount of tint should not exceed 30 mL (1.5 ounces) per gallon. Multiple containers of tinted paint should be boxed (intermixed) to ensure colour uniformity.
Répondue par: ROAnswers
Date de publication: 2018-10-07
  • y_2020, m_4, d_8, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_fr_CA, sid_03305746, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin