Perceuse à percussion, 1/2 po, 10 A

Article#00275406 Modèle#DWD520 Format1/2"x10A
Perceuse à percussion, 1/2 po, 10 A
 

Caractéristiques

La perceuse à percussion Dewalt DWD520 est équipée d'un moteur de 10 ampères qui génère une performance accrue en plus d'une excellente protection contre les surcharges. Elle se caractérise par son double usage : à la fois perceuse à percussion et perceuse, son utilisation est polyvalente, allant du bois à l'acier et la maçonnerie. La gâchette à deux doigts assure plus de confort, alors que la poignée à prise confortable et la poignée latérale verrouillable sur 360° avec prise souple offrent plus de contrôle et de polyvalence. Le choix de deux vitesses accommode vos besoins de perçage à grande vitesse ou à couple élevé. Finalement, le carter d'engrenage en métal assure une plus grande durabilité et une meilleure fiabilité sur le chantier. Garantie limitée de trois ans.

Vous pourriez aussi aimer

MAKITA
Trio perceuse, mélangeur et récipient
Format 1/2"x6.5AM
Article #11975278
Modèle #DS4011X
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble perceuse-visseuse, 1/2", 2 batteries SlimPack 18 V
Format 1/2"x18V
Article #19836264
Modèle #GSR18V-190B22
★★★★★ ★★★★★
4,3
(19)
BOSCH
Perceuse à percussion à vitesse variable, 7 A, 1/2''
Format 1/2"x7A
Article #1983278
Modèle #1191VSRK
★★★★★ ★★★★★
2,6
(24)
BOSCH
Perceuse-mélangeur avec fil, 5/8", 9,0 A
Format 5/8"x9.0AM
Article #19836315
Modèle #GBM9-16BN
★★★★★ ★★★★★
0
(0)
MAKITA
Perceuse et mélangeur 8,5A
Format 1/2"x8.5AM
Article #11975221
Modèle #DS4011
★★★★★ ★★★★★
0
(0)
MAKITA
Perceuse sans fil VVR LXT, 18V
Format 1/2"x18V
Article #11975347
Modèle #DDF453SYE
★★★★★ ★★★★★
0
(0)
MAKITA
Visseuse à gypse 6,5 A
Format 1/4"x6.5AM
Article #11975212
Modèle #FS4000
★★★★★ ★★★★★
0
(0)
MAKITA
Perceuse à percussion XPT - 18 V
Format 1/2"x18V
Article #11975324
Modèle #DHP458Z
★★★★★ ★★★★★
0
(0)
MAKITA
Clé à chocs sans fil, moteur sans balais, 1/4", 18 V
Format 1/4"x18V
Article #11975404
Modèle #DTD153Z
★★★★★ ★★★★★
0
(0)
MAKITA
Visseuse à gypse, moteur sans balais, 18 V
Format 1/4"x18V
Article #11975399
Modèle #DFS452Z
★★★★★ ★★★★★
0
(0)
BOSCH
Perceuse-visseuse à percussion, sans fil, 1/2", 18 V
Format 1/2"x18V
Article #19836302
Modèle #GSB18V-535CB15
★★★★★ ★★★★★
4,8
(6)
BOSCH
Perceuse VVR sans fil, batterie lithium ion, 1/2", 18 V
Format 1/2"x18V
Article #19836305
Modèle #GSR18V-755CB25
★★★★★ ★★★★★
0
(0)
BOSCH
Marteau rotatif SDS-plus(MD), 18 V, 3/4"
Format 18V
Article #19836299
Modèle #GBH18V-20N
★★★★★ ★★★★★
5
(3)
BOSCH
Marteau de démolition 120 V
Format 120V 10AM
Article #19835702
Modèle #DH507
★★★★★ ★★★★★
5
(1)
BOSCH
Ensemble visseuse à chocs Freak 2-en-1, 1/4" et 1/2", 18 V
Format 18V
Article #19836300
Modèle #GDX18V-1800CB15
★★★★★ ★★★★★
4,3
(3)
MAKITA
Marteau rotatif électrique 2'', 15 A
Format 15.0AM
Article #11975422
Modèle #HR5212C
★★★★★ ★★★★★
0
(0)
BOSCH
Perceuse à percussion, 1/2", lithium ion 18 V
Format 1/2"x18V
Article #19836304
Modèle #GSB18V-755CN
★★★★★ ★★★★★
0
(0)
BOSCH
Visseuse à chocs Freak 2-en-1, 1/4" et 1/2", 18 V
Format 18V
Article #19836301
Modèle #GDX18V-1800CN
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble visseuse à chocs Freak, 1/4" et 1/2", 18 V
Format 18V
Article #19836295
Modèle #GDX18V-1600B12
★★★★★ ★★★★★
4,3
(61)
METABO HPT
Ensemble de perceuse à percussion MultiVolt, 1/2", 36 V
Format 1/2" 36V
Article #37815192
Modèle #DV36DAM
★★★★★ ★★★★★
4,9
(16)
BOSCH
Marteau piqueur «Brute Turbo»
Format 1 1/8" 120V
Article #19835700
Modèle #BH2770VCD
★★★★★ ★★★★★
5
(1)
BOSCH
Ensemble perceuse-visseuse sans balais, 1/2"
Article #330609724
Modèle #DDH183-01
★★★★★ ★★★★★
0
(0)
BOSCH
Perceuse-visseuse Compact Tough™, 18 volts, 1/2"
Article #330609733
Modèle #DDS181AB
★★★★★ ★★★★★
0
(0)
BOSCH
Perceuse-visseuse à percussion Bosch, 12 volts
Article #330622804
Modèle #PS130BN
★★★★★ ★★★★★
0
(0)
METABO HPT
Visseuse à percussion Multivolt, 1/4", 36 V
Format 1/4" 36V
Article #37815196
Modèle #WH36DBQ4M
★★★★★ ★★★★★
4,9
(18)

Spécifications techniques

Type :Perceuse à percussion Composante :Métal/plastique Ampérage :10 A Battements par minute :0 à 56 000 Tours par minute :0 à 1 200 - 0 à 3 500 Mandrin :1/2" Vitesse :2 vitesses/2 modes Inclus :Poignée la térale 360°, tige en acier, clé pour mandrin Garantie :Garantie limitée de 3 ans, contrat de service gratuit d'un an, garantie de remboursement de 90 jours Source d'alimentation :Électrique
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Perceuse à percussion, 1/2 po, 10 A est évalué 4.2 de 5 de 80.
Rated 5 de 5 de par Great product with lots of torque and versatility I marked it down on quality because brand new out of the box the variable speed did not work properly. On low speed you should be able to vary from 0-1,200 rpms. I got no action at all until the trigger was pushed about 1/2 way in at which time it would start at around 500 rpms and rev up from there. The rpms were way to fast for mixing sheetrock mud or paint. I exchanged the drill immediately and the new one is working perfectly so overall I gave it an excellent rating. This is a great drill with lots of torque and functionality. I happened to get a bad switch, so just be sure to check the variable speed functionality right away.
Date de publication: 2013-11-07
Rated 5 de 5 de par Great Drill ! I had a quantity of 226 holes to drill using a 3/16" bit into concrete. I have owned and/or used many other brands. This drill cuts through the concrete like it's butter! It actually performs as well as some of the much more expensive drills and way better than anything in it's class/price range. It makes the job so easy, because you don't have to lay into it with your body weight. It does the work almost by itself !! I would definitely recommend this drill to anyone.
Date de publication: 2011-04-18
Rated 5 de 5 de par Great Drill / Great Price I had to install a commercial steel door/steel frame. I knew I had 8 - 3/8 holes to drill. one side was into block, the other a brick wall. Figured I better get a drill with strength. My 15yr old 1/2in 3amp Craftsman seen its days. All of these holes had to be 4in deep. I drilled 1/4in pilot holes first then switched to the 3/8 bit. This drill ate the job up. Had all 8 holes drilled in 20min. couldn't believe it! Fastest I ever drilled through block/brick. Will enjoy not dread future jobs of concrete drilling. Tip; Drilling over 1/4in especially brick, a pilot hole is wise.
Date de publication: 2011-04-18
Rated 1 de 5 de par Only 1yr warranty after that you pay Dewalt makes an poor quality Hammer drill. 1) Burned out motor drilling a 2-1/4" hole with a hole saw. 2) Chuck key is horrible and never keys in tight- a knuckle buster. Opens constantly. DEWALT isn't what it use to be.. If you like disposable tools buy this one. Now I have to pay 1/2 the cost of the drill plus shipping to get it fix. Purchased a RIDGID hammer drill to replace this because as a contractor I have to have the tool. Ridgid has a Lifetime warranty on parts and labor so I won't have to buy another one or pay for a repair next time.
Date de publication: 2015-01-09
Rated 3 de 5 de par Good hammer drill but not at max capacity I purchased this hammer drill to install iron fence around my pool. The fence post were welded to base plates drilled for 1/2 inch anchor bolts. I needed to drill 80 holes through 4 inch thick concrete (I through drill so bolt can be pounded down into the dirt and a new bolt inserted in the hole if there is a problem). When it was working, it worked great. But, the gearbox heated up fast and after 50 holes drilled over a three day period, the gearbox really overheated, the gearbox grease oozed out and the gearbox shelled. I think this hammer drill would be good if drilling smaller holes, say 3/8 inch or less. But it does not have the backbone to stand up to its max capacity of 1/2". I learned my lesson and returned this hammer drill and purchased a rotary hammer instead.
Date de publication: 2011-12-26
Rated 1 de 5 de par Smoking Motor Using concrete to make our own concrete countertops. Mixing in a 5-gal bucket with a 1/2" paddle. Mixing to the concrete specifications, and even a little wetter for easier mixing. Sept 2014 used a 7-amp corded drill (Skil maybe?) and it started to smoke after mixing about the 4th bucket. The thinking that a 7-amp isn't robust enough, and maybe a better, trusted brand would work better. April 2015 purchased this DeWalt 10-amp drill. It started smoking on the FIRST bucket we mixed. The performance was even worse than the cheaper, weaker model. This drill was the "best" that Lowes in Shakopee had on the shelf.
Date de publication: 2015-04-06
Rated 5 de 5 de par Great Drill Recommended Amazing drill. Drilled 8 6 1/2 in deep holes with 7/16 drill bit at an airport. Airport concrete is a bit more tough than residential and it went through it like cheese. Awesome will recommend to others.
Date de publication: 2011-06-01
Rated 5 de 5 de par Hammer Drill Believer Purchased this hammer drill yesterday. Had 4 small holes to drill in a regular brick wall to mount a shelf. Spent about 1-1/2 hours the day before using a regular drill and completed 2 holes. The remaining 2 holes I completed in less than 1 minute with this hammer drill. Nothing like having the right tool for the job at hand. I'm just sorry I didn't purchase a hammer drill before this. The only negative I can think of is the drill didn't come with a case. Very happy with my purchse.
Date de publication: 2012-01-02
  • y_2020, m_4, d_1, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_80
  • loc_fr_CA, sid_00275406, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin