Perceuse à percussion à vitesse variable, 7 A, 1/2''

Article#1983278 Modèle#1191VSRK Format1/2"x7A
Perceuse à percussion à vitesse variable, 7 A, 1/2''
 

Caractéristiques

La perceuse à percussion VSR 1191VSRK de 1/2'' (1,25 cm) Bosch est dotée d'un moteur réversible puissant de 7 A, qui produit le meilleur rapport poids/rendement de sa categorie et une variation de 0 à 3 000 tours par minute. Elle présente aussi une conception ergonomique. Les caractéristiques garantissent que la 119VSRK est conçue pour fournir le meilleur rapport poids-performances de sa catégorie. Utilisez le levier de sélection pour choisir le perçage avec percussion dans le béton dur. Transmission de puissance lisse et durée de vie prolongée de l'outil. Interrupteur à inversion de vitesse à commande complète pour le perçage, la conduite et le retrait des boulons ou des vis. Sélectionner le foret uniquement pour l'acier, le bois ou l'aluminium. Sélectionnez le mode perçage uniquement pour l'acier, le bois ou l'aluminium. L'ensemble inclut une poignée orientable sur 360°, une butée de profondeur et un coffret de transport. Garantie limitée 1 an.

Spécifications techniques

Type :Perceuse à percussion Composante :Métal/plastique Ampérage :7 A Battements par minute :0 à 48 000 Tours par minute :0 à 3 000 Mandrin :1/2 Vitesse :Variable/Réversible Garantie :Limitée 1 an Source d'alimentation :Électrique

Produits fréquemment achetés ensemble

YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Article #32045053
Modèle #5139NSP
★★★★★ ★★★★★
3
(2)
YELLOW JACKET
Adaptateur pour protection DDFT portative, 1800 W, 15 A
Article #32045050
Modèle #14650013-6
★★★★★ ★★★★★
0
(0)
WOODS
Cordon de rallonge électrique, 12/3, 25', rouge
Format 12/3 25'
Article #74045239
Modèle #1697SW0002
★★★★★ ★★★★★
0
(0)
BOSCH
FORET MULTI-CONST. 5MCX
Format 5MX
Article #19835461
Modèle #MC500
★★★★★ ★★★★★
5
(1)
BOSCH
Forets Daredevil, ensemble de 10
Format 10MX
Article #19835654
Modèle #DSB5010
★★★★★ ★★★★★
5
(1)
BOSCH
Ens. forets à béton 7mcx
Format 7MX
Article #19835449
Modèle #HCBG700
★★★★★ ★★★★★
4,5
(2)

Vous pourriez aussi aimer

MAKITA
Perceuse sans fil VVR LXT, 18V
Format 1/2"x18V
Article #11975347
Modèle #DDF453SYE
★★★★★ ★★★★★
2
(1)
BOSCH
Perceuse-mélangeur avec fil, 5/8", 9,0 A
Format 5/8"x9.0AM
Article #19836315
Modèle #GBM9-16BN
★★★★★ ★★★★★
0
(0)
MAKITA
Perceuse et mélangeur 8,5A
Format 1/2"x8.5AM
Article #11975221
Modèle #DS4011
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble visseuse à chocs Freak, 1/4" et 1/2", 18 V
Format 18V
Article #19836295
Modèle #GDX18V-1600B12
★★★★★ ★★★★★
4,2
(70)
BOSCH
Ensemble perceuse-visseuse, 1/2", 2 batteries SlimPack 18 V
Format 1/2"x18V
Article #19836264
Modèle #GSR18V-190B22
★★★★★ ★★★★★
4,3
(21)
MAKITA
Trio perceuse, mélangeur et récipient
Format 1/2"x6.5AM
Article #11975278
Modèle #DS4011X
★★★★★ ★★★★★
0
(0)
MAKITA
Clé à chocs sans fil, moteur sans balais, 1/4", 18 V
Format 1/4"x18V
Article #11975404
Modèle #DTD153Z
★★★★★ ★★★★★
0
(0)
MAKITA
Visseuse à gypse 6,5 A
Format 1/4"x6.5AM
Article #11975212
Modèle #FS4000
★★★★★ ★★★★★
0
(0)
MAKITA
Perceuse à percussion XPT - 18 V
Format 1/2"x18V
Article #11975324
Modèle #DHP458Z
★★★★★ ★★★★★
0
(0)
BOSCH
Marteau de démolition 120 V
Format 120V 10AM
Article #19835702
Modèle #DH507
★★★★★ ★★★★★
5
(1)
BOSCH
Marteau rotatif SDS-plus(MD), 18 V, 3/4"
Format 18V
Article #19836299
Modèle #GBH18V-20N
★★★★★ ★★★★★
5
(3)
BOSCH
Perceuse-visseuse à percussion, sans fil, 1/2", 18 V
Format 1/2"x18V
Article #19836302
Modèle #GSB18V-535CB15
★★★★★ ★★★★★
4,8
(6)
BOSCH
Perceuse à percussion, 1/2", lithium ion 18 V
Format 1/2"x18V
Article #19836304
Modèle #GSB18V-755CN
★★★★★ ★★★★★
0
(0)
MAKITA
Visseuse à gypse, moteur sans balais, 18 V
Format 1/4"x18V
Article #11975399
Modèle #DFS452Z
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble visseuse à chocs Freak 2-en-1, 1/4" et 1/2", 18 V
Format 18V
Article #19836300
Modèle #GDX18V-1800CB15
★★★★★ ★★★★★
4,5
(4)
BOSCH
Visseuse à chocs Freak 2-en-1, 1/4" et 1/2", 18 V
Format 18V
Article #19836301
Modèle #GDX18V-1800CN
★★★★★ ★★★★★
5
(1)
METABO HPT
Visseuse à percussion Multivolt, 1/4", 36 V
Format 1/4" 36V
Article #37815196
Modèle #WH36DBQ4M
★★★★★ ★★★★★
5
(24)
BOSCH
Marteau perforateur Bosch, Bulldog SDS+, lithium-ion 18 V
Format 18V
Article #19836340
Modèle #GBH18V-26DK15
★★★★★ ★★★★★
4,1
(7)
METABO HPT
Ensemble de perceuse à percussion MultiVolt, 1/2", 36 V
Format 1/2" 36V
Article #37815192
Modèle #DV36DAM
★★★★★ ★★★★★
5
(21)
METABO HPT
Clé à chocs Multivolt, Metabo HPT, 36V 1/2'', sans fil
Format 1/2" 36V
Article #37815197
Modèle #WR36DBQ4M
★★★★★ ★★★★★
5
(11)
BOSCH
Marteau piqueur «Brute Turbo»
Format 1 1/8" 120V
Article #19835700
Modèle #BH2770VCD
★★★★★ ★★★★★
5
(1)
MAKITA
Marteau rotatif sans fil, 1-9/16'', Lithium Ion 36 V
Format 36V 1 9/16"
Article #11975420
Modèle #DHR400PT2
★★★★★ ★★★★★
0
(0)
BOSCH
Perceuse VVR sans fil, batterie lithium ion, 1/2", 18 V
Format 1/2"x18V
Article #19836305
Modèle #GSR18V-755CB25
★★★★★ ★★★★★
0
(0)
METABO HPT
Marteau à percussion Metabo HPT MultiVolt, 1 9/16", 36 V
Format 1 9/16"x36V
Article #37815191
Modèle #DH36DMAQ2M
★★★★★ ★★★★★
5
(7)
BOSCH
Perceuse-visseuse Compact Tough™, 18 volts, 1/2"
Article #330609733
Modèle #DDS181AB
★★★★★ ★★★★★
0
(0)

Can i use an SDS max bit with this?

Posée par: cocoabwoi
  • y_2020, m_7, d_5, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_fr_CA, sid_1983278, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Perceuse à percussion à vitesse variable, 7 A, 1/2'' est évalué 2.5 de 5 de 25.
Rated 4 de 5 de par Good product for the $$$ I purchased this drill yesterday and also a couple Bosch hammer-drill bits. I needed four 5/8 holes in a patio slab that has been in place for 50+ years. I'd tried drilling it with a few days ago with a large 1/2 drill I had and was only able to drill an inch after a long time trying. This drill and a new bit (same as used with regular drill, just another one) did the trick in no time, the other three holes were drilled very quickly too. This is a light duty drill, no doubt, don't expect a contractor quality drill that can go all day. But then, you'll not have paid for that. Let it cool down and don't expect it to do things it wasn't meant to. You'll love it!
Date de publication: 2011-04-19
Rated 1 de 5 de par Purchased Today, Going Back Tomorrow Very First use of Drill with a 1/2 inch Bit. Chuck Came loose after about 3 seconds of drilling. Occured in both drill and hammer mode. Tightening the chuck did absolutely no good. As tight a I could manage and still came loose after a few seconds. The teeth on the chuck also break easily as it is tightened. The slippage was so bad that I managed to turn my 1/2 inch shank bit into a 3/8 inch shank. The quality was surprisingly poor and the design of the front grip is also poor. The knob for tightening the front grip is very small and hard to tighten without a set of pliers. Front grip rotates easily during use. Don't think that I will ever purchase Bosch again!
Date de publication: 2011-06-25
Rated 3 de 5 de par Depends on what you need it to do. This drill works fine for putting holes in cinderblock, brick, or "young", less dense concrete. My garage is typical cinderblock and this drill made hanging shelves go much quicker than a regular drill. I also hung a sign into exterior brick for a friend's business with no problem. This drill is useless (even dangerous) for tough jobs. I have 90 year old house and the foundation walls and basement floor are as tough as steel. I think the walls also have various stones as aggregate in the mix. They laugh at this drill and I snapped and wore down half a dozen bits before I went out and rented a tool up for the task.
Date de publication: 2011-07-27
Rated 1 de 5 de par Quit working with few hours This drill was good value at $89 and drilled well. But it just quit working with very little use on the drill. I pulled the case apart and I have 120v coming out of the trigger but no current thru the windings. I called Bosch and they will charge $68 to fix it. I bought it 4 years ago but again very little use. I can buy a Porter Cable for $70 so that's what I will do. I have high dollar large hammer drills but I need a small one for many jobs. I thought Bosch was a good brand...not this drill. That will be my last Bosch tool.
Date de publication: 2013-12-13
Rated 4 de 5 de par Good for light and medium duty jobs. Works excellent for drilling masonry; things such as tapcons. I wouldn't expect this drill to deal with really heavy, tough materials. In that case, don't buy a hammer drill - buy a rotary hammer instead (they are different). Pros: - decent price - works great, fast hammering action and reasonably powerful motor - hammer and plain rotary switch, multiple speeds Cons: - cheap plastic depth gauge and T-handle are weakest points - plastic around the switch area scrapes the skin if you aren't using gloves
Date de publication: 2011-08-15
Rated 1 de 5 de par Not capable Having Bosch table and miter saws I purchased this drill on the company name. WRONG!!! My son burned up the first drill on two holes with a 1/2 inch bit. After holding my tongue about how to use a drill I proceeded to show him how to let the drill do the work. Needless to say, I burned up the second drill on the first hole. l had a Black and Decker 1/2 inch hammer drill for 20 years with no problem until the cord got cut. We expected more out of Bosch. The Bosch chuck key didn't fit properly. The chuck actually started wobbling in the bearing. I just couldn't believe how incapable this drill is. Lowe's, on the other hand, always stands behind products they sell which is the main reason I shop at Lowe's at least once a day. Thank you Lowe's.
Date de publication: 2012-04-02
Rated 5 de 5 de par First use....I am impressed! I went to Lowes looking for the Hitachi 5/8 that was on sale and ended up taking this home because this is all they had in stock. I needed the drill today and thought I can return it if needed. Got home, drilled about a dozen Tapcon holes with a Tapcon Drill bit in 40 year old concrete and was thoroughly impressed with the hammer action and the speed. I agree with others that the depth gauge is a little cheap plastic, but its a nice feature. The attachment handle felt great and the tool was easy to control. I'm probably going to keep the tool for the occasional concrete drilling that I probably shouldn't be doing, but do anyways...You know what I mean.
Date de publication: 2013-06-09
Rated 1 de 5 de par Disappointed with Bosch I bought this drill because of the reviews, I do wall concrete installations with many projects, drilling holes 1" to 1 1/2" deep with 3/16 tapcon bit, I managed to drill 9 holes and I saw sparks and it stop working, I couldn't finish my job, I had 20 holes left to drill. I was very disappointed and so was my customer as he had expected the job to be completed that day, I returned it and went to Home Depot and bought me the Milwaukee 5/8 in.SDS Rotery hammer drill model#5263-21 it worked like a champ
Date de publication: 2014-03-29
  • y_2020, m_7, d_5, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_fr_CA, sid_1983278, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin