Ponceuse à courroie Metabo HPT 120 V 9 A

N° d'article 330938111 N° de modèle SB8V2M
Ponceuse à courroie Metabo HPT 120 V 9 A
 

Caractéristiques

La ponceuse à courroie ponce les surfaces en bois et métalliques, finit les revêtements de sol, prépare les surfaces pour la peinture, enlève la rouille et la vieille peinture et finit les matériaux de maçonnerie tels que l'ardoise et le béton.

  • Moteur de 9 A, 1020 W offrant une puissance accrue pour les travaux de ponçage les plus difficiles
  • Contrôle de vitesse variable à la base de la poignée pour diverses applications et une meilleure maniabilité
  • Le couvercle transparent améliore la visibilité lors du ponçage le long d'une surface
  • Le sac de collecte de poussière réduit les particules en suspension dans l'air et maintient la zone de travail propre
  • Couvert par une garantie professionnelle limitée de 5 ans

Spécifications techniques

Pieds/minute (maximum) (pi) :1475 Poids (lb) :9,5 Longueur du cordon (pi) :8 Garantie sur les pièces du moteur :60 Ampérage :9 Garantie de base sur la main-d'oeuvre :60 Garantie de base sur les pièces :60 Nombre minimum de pieds/minute (pi) :820 Garantie sur la main-d'oeuvre du moteur :60 Voltage (volts) :120 Type de boîtier/coffret :Aucun étui inclus Accessoires inclus :Oui Nombre de trous :0 Sans balais :Non Commande de vitesse électronique :Oui Nom de la gamme :S.O. Pile comprise :S.O. Avec fil/sans fil :Avec fil Gestion de la poussière :Oui Type :Ceinture Type de papier :Bande abrasive de 3 po x 21 po Vitesse maximale de ponçage :820 to 1475 SFM Caractéristique principale pour la publicité / Affiche no 1 :Moteur de 9 A, 1020 W offrant une puissance accrue pour les travaux de ponçage les plus difficiles Caractéristique principale pour la publicité / Affiche no 2 :Vitesse variable avec 5 réglages qui permet un contrôle de la vitesse pour diverses applications Sans cordon :Non Tension de batterie :S.O.

Vous pourriez aussi aimer

BOSCH
Ensemble de 2 ponceuses aléatoire et orbitale 5 po 12000 osc/min moteur 2,0 A
Format ENS2
N° d'article 19836316
N° de modèle GSS20-40+ROS10
★★★★★ ★★★★★
3,7
(15)
DEWALT
Sableuse orbitale aléatoire sans fil 5 po 20V Max XR de DEWALT,12 000 OPM, vitesse variable, outil seul (sans batterie)
Format 5"x20V
N° d'article 00277194
N° de modèle DCW210B
★★★★★ ★★★★★
4,6
(221)
DEWALT
Ponceuse orbitale spéciale à fil 5 po avec sac DEWALT, 3 A, 12 000 OPM, interrupteur étanche à la poussière, 8 trous
Format 5"x3AM
N° d'article 00276219
N° de modèle DWE6423K
★★★★★ ★★★★★
4,5
(312)
MAKITA
Ponceuse à courroie Makita filaire 3 x 24 po à moteur 7,8 A, aluminium et plastique
Format 3x24"x7.8A
N° d'article 1197018
N° de modèle 9924DB
★★★★★ ★★★★★
3,6
(5)
CRAFTSMAN
Ponceuse à ruban filaire CRAFTSMAN, moteur 7 A, poignée 3 positions, sac à poussière, remplacement rapide
Format 3x21"x7AM
N° d'article 00276572
N° de modèle CMEW213
★★★★★ ★★★★★
3,3
(209)
CRAFTSMAN
Ponceuse orbitale spéciale à fil 5 po CRAFTSMAN, moteur 3 A, 12 000 OPM, 8 trous, interrupteur étanche à la poussière
Format 5"x3AM
N° d'article 00276574
N° de modèle CMEW231
★★★★★ ★★★★★
4,6
(187)
DEWALT
Ponceuse à fil 1/4 po avec sac à poussière DeWalt, moteur 2,3 A, 14 000 OPM, port à poussière verrouillable
Format 2.3AM
N° d'article 00275895
N° de modèle DWE6411
★★★★★ ★★★★★
3,8
(27)
BOSCH
Ponceuse 5 po à mouvement orbital aléatoire Bosch moteur de 2,5 A 12000 OPM vitesse variable
Format 5"x2.5AM
N° d'article 19835934
N° de modèle ROS20VSC
★★★★★ ★★★★★
4,5
(220)
MAKITA
Ponceuse orbitale spéciale sans fil de Makita - Prise au creux de la paume - 11 000 OPM - Batteries aux ions de lithium
Format 5"x18V
N° d'article 11975341
N° de modèle DBO180Z
★★★★★ ★★★★★
3,7
(3)
MAKITA
Ponceuse de finition 5 po Makita moteur 3 A 12 000 OPM à système autoagrippant
Format 5"x3AM
N° d'article 11975219
N° de modèle BO5030
★★★★★ ★★★★★
4,8
(6)
CRAFTSMAN
Ponceuse de finition filaire CRAFTSMAN, 1/4 po, moteur de 2 A, 13 500 OPM
Format 2AM
N° d'article 00276573
N° de modèle CMEW230
★★★★★ ★★★★★
4,3
(82)
CRAFTSMAN
Sableuse orbitale aléatoire V20 CRAFTSMAN, 20 V, 12 000 orb./min, collecteur de poussière, outil seul (sans batterie)
Format 5"x20V
N° d'article 00276547
N° de modèle CMCW220B
★★★★★ ★★★★★
4
(164)
CRAFTSMAN
Ponceuse de finition de 3 A filaire CRAFTSMAN 14 000 tr/min, rouge et noir
Format 3AM
N° d'article 00277863
N° de modèle CMEW210
★★★★★ ★★★★★
4,6
(21)
MAKITA
Ensemble de ponceuse orbitale et ponceuse 1/4 feuille Makita moteur de 1,6 A poignée caoutchoutée ergonomique
Format 2MXx3-1.6AM
N° d'article 11975277
N° de modèle DK1129
★★★★★ ★★★★★
4,7
(3)
KOBALT
Ponceuse orbitale sans fil Kobalt 24 V Max, moteur sans balai, 5 po, outil seul sans batterie
Format 24V
N° d'article 45595026
N° de modèle KOS 2450B-03
★★★★★ ★★★★★
4,5
(120)
CRAFTSMAN
Ponceuse de finition CRAFTSMAN 20 V sans fil, rouge et noire
Format 20V
N° d'article 00277466
N° de modèle CMCW221B
★★★★★ ★★★★★
4,7
(42)
DEWALT
Ponceuse Dewalt Max XR 20 V, outil seulement
Format 20V
N° d'article 00277449
N° de modèle DCW200B
★★★★★ ★★★★★
4,4
(47)
WAGNER
Décapeur rotatif pour peinture OneStep PaintEater de Wagner
N° d'article 49195123
N° de modèle 0513040
★★★★★ ★★★★★
3,9
(108)
KOBALT
Ponceuse à bande sans fil Kobalt 24 V, moteur sans balai, bleue et noire, outil seul sans batterie
Format 24V
N° d'article 45595019
N° de modèle KBS 124B-03
★★★★★ ★★★★★
4,6
(52)
PORTER-CABLE
Ponceuse d'établi Porter-Cable de 5 A
Format 4-6"x5AM
N° d'article 32019858
N° de modèle PCXB410SA
★★★★★ ★★★★★
4,4
(23)
DEWALT
Ponceuse orbitale Dewalt sans fil de 20 V, accessoires inclus
Format 5" 20V
N° d'article 00277510
N° de modèle DCW210D1
★★★★★ ★★★★★
4,6
(99)
KING CANADA
Cabinet de sablage à jet avec lumière DEL par King Canada
N° d'article 331002086
N° de modèle KSB-110N-LED
★★★★★ ★★★★★
0
(0)
TOOLTECH
Ponceuse électrique à cloison sèche Tooltech Workbench, 120 V, 5 A
N° d'article 330771527
N° de modèle 192120
★★★★★ ★★★★★
0
(0)
KING INDUSTRIAL
Ponceuse à cloisons sèches avec fil à vitesse variable de 120 V 5 A par King Industrial
N° d'article 331002018
N° de modèle KC-8379
★★★★★ ★★★★★
0
(0)
BOSCH
Ponceuse excentrique 18 V sans balais de 5 po par Bosch
N° d'article 331058811
N° de modèle GEX18V-5N
★★★★★ ★★★★★
4,8
(43)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Ponceuse à courroie Metabo HPT 120 V 9 A est évalué 4.3 de 5 de 241.
Rated 4 de 5 de par Worked fine Dust collection bag worked much better than my old porta cable. The belt tracked fine. I had read some reviews that the belt needed to be adjusted frequently. Nope, I did not have that problem. Sanded for a solid 3 hours with 120 grit. Filled the dust bag full 4 times on deck project.
Date de publication: 2022-05-11
Rated 1 de 5 de par Don't Buy!!! Purchased this belt sander...brought it home...never could get paper to hold on the belt no matter how much I tightened it. Took it back to Lowe's and three individuals that worked there tried it..stated it was defective. Got another one..same kind brought it home and loaded the paper. Worked for about 30 minutes then the paper flew off. Again..tried the tighring process again and the same as the first..paper flew off and shredded. Took it back to the store a second time and got a refund. Product is a pc of crappie. Will now look for something else.
Date de publication: 2016-11-01
Rated 5 de 5 de par Best Purchase Ever... Highly recommend I bought this sander to strip old paint off the outside steps. Highly recommend this sander.
Date de publication: 2016-07-02
Rated 5 de 5 de par I needed a sander to sand my subfloor, particularly the edges, as preparation for installing vinyl planks. After reading reviews, I decided to buy this sander (the only other sanders I have is an orbital and small mouse sander). This one is amazing: easy to use and moves smoothly though you have to keep a good grip (I'm a small-sized person and not accustomed to larger sanders). The bag caught most of the debris, and my subfloor is perfectly smooth and even (well, it feels that way). I'm looking forward to using this on other projects. I bought extra sandpaper at the same time as sander as I wasn't sure if it came with sandpaper. One piece was included--220 grit I believe. Make sure you buy whatever grade of paper you need when you buy the sander. I wish it had a bag for storage--always makes it easier to keep things together. I'm using the box for now.
Date de publication: 2017-08-15
Rated 5 de 5 de par Great for New Deck Preparation Performs great for new deck prep. Removes ink stamps and smooths imperfections in wood. Ready to apply Stain. Thanks Hitachi & Lowe's.
Date de publication: 2017-07-17
Rated 5 de 5 de par Good Product It has power to spare and the sanding belts stay on the rollers.
Date de publication: 2015-06-23
Rated 5 de 5 de par Glad I chose this one Less expensive, a tad lighter and not as bulky as the quite old DeWalt it replaced. Bought it to sand a 10'x20' deck, an 8'x8' deck and several stairs. Ran it for usually for 3-4 hour strecthes. It got a little warm, but never failed. It probably cost less than renting one and I get to keep it.
Date de publication: 2023-10-06
Rated 2 de 5 de par Good sander, terrible design Sander had ok power. Was looking for a smaller sander, this one was an ok price. Everything worked well EXCEPT the design of the power cord. I've used many belt sanders where the cord was a non issue. It's positioned on the back like a ponytail and coming back after a forward motion, the power cord would bunch up right under it and inevitably get caught in the belt. Returned.
Date de publication: 2017-07-17
Rated 3 de 5 de par OK machine I have found the machine to be powerful and durable. However, I have encountered some issues with its operation. The sanding belts have to be carefully adjusted after each one is changed out and also during usage, they begin to move slightly during grinding. This has caused some marking on wood objects being ground which are then difficult to remove. It is as if a 3 inch wide bely isn't wide enough, although that is all that will go on the machine. While seemingly in excellent condition and new when purchased, it was clear that the unit had been used or extensively tested due to some markings on the bottom plate and some scratches on the underside of the unit.
Date de publication: 2021-12-12
Rated 5 de 5 de par Matbo 9amp sander strong sturdy performer. Very sturdy sander. Plenty of power and performed as advertised. Hold on tight when operating and watch how much pressure you apply.
Date de publication: 2021-01-13
Rated 5 de 5 de par Very nice sander!! This sander has great dust collection!! It is very manageable and ergonomic. I never felt out of control with it, and it never bogged down.
Date de publication: 2015-09-24
Rated 1 de 5 de par At first I was pleased with the sander. After I had used up the supplied belts I purchased some standard 3x21 belts to find out they wouldn’t fit. I measured one of the supplied belts one found out they were 21.5 inches long. I now own a useless piece of equipment.
Date de publication: 2023-08-02
Rated 5 de 5 de par needed a belt sander fast Current belt sander broke during project. Chose this one due to reviews. Works great with plenty of power! solid tool! not plastic like others.
Date de publication: 2021-02-18
Rated 1 de 5 de par EPIC FAILURE [This review was collected as part of a promotion.] EPIC CATASTROPHIC FAILURE. Seems the Plastic drive wheel is Pressed onto it’s axle and failed within 30 minutes of use. Return and purchased the Porter Cable belt sander and continuing to sand paint from deck. DO NOT PURCHASE.
Date de publication: 2017-06-14
Rated 1 de 5 de par Hitachi 9-Amp Belt Sander Bought this as a replacement for my BD that finally died after many years of use. Bought the Hitachi for 2 reasons: 1) Name 2) it was on sale. I am sanding replacement lap board siding. The Hitachi cut grooves all over the board. Would not sand in a straight line. I tried all speeds with same results. I tried different belts and even took the tension plate off. Again grooves all over the board essentially ruining it. My BD, before it quit, was doing a great job
Date de publication: 2017-07-09
Rated 4 de 5 de par A Loud and Heavy Machine This is very heavy and I have used many different belt sanders over the stretch of 30some odd years. There has not been any major improvements to the belt sanders. This Metebo (Hitachi) was a replacement purchase for another belt sander. This sander did the job well enough but it was louder than I was expecting and the plastic viewer made no sense to me other than a gimmick to purchase. I am luke warm on this sander.
Date de publication: 2021-10-06
Rated 2 de 5 de par Worth the cost? No. But eh Feels cheap. Doesn't feel like a good quality product that will last for years, I am hoping it makes it at least a yeah. Bogs down quite easilt and the paper is near impossible to keep centered. I am not doing any heavy work with it so was expecting better performance. I'll keep it, simply because I could use something for really really lite work.
Date de publication: 2021-07-01
Rated 1 de 5 de par Could be good but ruined by poor production Bought this sander to replace an aging Porter Cable. Will be returning it. It would be a great product but they have ruined it by cutting costs and placing a wear pad that is not formrd to the foot. This causes the belt tracking to change once you start sanding. Also since the pad doesn't conform to the foot there is no flat surface and you will not get a flat final product. I could replace the pad with aftermarket one but shouldn't have to. I will just replace it with a different brand.
Date de publication: 2019-10-26
Rated 3 de 5 de par poor design One star because it is heavy and appears it would last. I don’t think the designer ever used the sander, all the weight is on left side so in order to sand using the entire belt you have to tilt it to the other side while applying pressure to sand. So i used it 5 minutes and taking it back. Bought it today taking it back tomorrow.
Date de publication: 2021-07-01
Rated 5 de 5 de par Belt Sander I am retired high school wood shop teacher and this sander is very easy to use . Changing belts is easy and the wright weight to handle in your workshop.
Date de publication: 2017-01-06
Rated 1 de 5 de par dust collector works great [This review was collected as part of a promotion.] After sanding a 4 foot by 4 foot square,sander started squealing. Waited a few minutes,sanded another 4 foot square,shut off machine to sweep,machines motor would spin,no belt movement,,removed belt,motor would run,no drive returned sander. This was first use using 40 grit to remove paint. Didn't give Hitachi a second chance. Trying Porter Cable tomorrow.
Date de publication: 2019-03-26
Rated 1 de 5 de par poor design rear plastic of rear pulley keeps burn have had the sander for a month and I've already had two rear drive pulley burn up its the plastic that get heated and melts
Date de publication: 2016-06-11
Rated 5 de 5 de par upgrade for sure Speed control and hogs material when needed. Saves me 50% sand time
Date de publication: 2014-11-27
Rated 5 de 5 de par Hitachi 3x21 belt sander Recieved it, put it to work and tested all capabilities. Especially liked the variable speed function and the ability to set several different speeds. Satisfied with value and function. Too early to tell about length of service life but seems like a solid product.
Date de publication: 2015-08-27
Rated 2 de 5 de par Hard belt to adjust - Dust catcher clogs easily Great motor - Easy on/off. Adjustable speed is cool, but machine is made heavy so long-term use can be a bit rough on neck & shoulders. Belt will created 3 1/2 inch channels in project if using high speed on softer wood, e.g. redwood & pine. Belt is not an issue to change, though near impossible to align properly as the spring loaded screw is too hard to turn. Solution is to stand machine on end, and put full weight on back end of machine to compress spring and then tighten screw as much as possible, then loosen once the motor starts up. Stupid. The belt has caught up the cord twice into the sanding wheels and sliced the power cord open. The cord comes out of the top of the machine with an angle towards the rear, but the height of the rubber cord sleeve does not provide a strong enough direction to where the cord will follow behind during use and will move up along the side of the machine and if not very careful, the cord can be swept up by the wheels and sliced open. My other belt sander that aims the cord to the rear of the machine has never done during the 100s of hours I have used it. The saw dust channel blocks up with dust. The ONLY way to clear the blockage has been to run the sander with no belt installed and aim a leaf blower on high speed against the edge of the machine by the rear wheels, into the motor vent ports and into the dust exhaust to hopefully dislodge the blockage, which does not always work.
Date de publication: 2017-12-23
Rated 5 de 5 de par Watch out for that power cord oops This is a replacement sander for the one I trashed at the belt sander races. It works great and does what a sander should do. Of course I wasn't watching it for a second and wrapped the cord around the drum, but I was able to get it out and fix the damage with electrical tape. I'll put a new power cord on in someday but for now it works great.
Date de publication: 2023-06-19
Rated 5 de 5 de par Fantastic! This belt sander is amazing!! Super easy to use and made my job of sanding down my deck a breeze!
Date de publication: 2021-06-14
Rated 5 de 5 de par Great Sander. Won't Find a Better Value! [This review was collected as part of a promotion.] I searched high and low for the perfect belt sander for my needs. I typically buy middle of the road products and strive to get the best quality, reliability, and value for my money. I feel like I accomplished that with this purchase. You can tell when a company stands by their product based upon their warranty. It is practically unheard of to see a 5-year warranty anymore so seeing that confirmed I had found the right product.
Date de publication: 2021-01-29
Rated 4 de 5 de par Really good! Very nice sander. I like everything about it except that there is a small hole where the dust bag clip attaches which lets dust fly out. It's not bad actually, as it collects most of the dust, but they could have made a better closure. Otherwise I'm really happy with it. Powerful, adjusts very nicely, and not terribly loud.
Date de publication: 2024-01-10
Rated 5 de 5 de par Good power Much better sander then the Rigid 6.2 amp 920 max rpm. the Metabo has a 9.0 amp 1420 max rpm. I had both and could tell a big difference, not to mention this one has 21inch in length vs Rigid being only 18. If you are deciding between the two this is a much better sander.
Date de publication: 2020-09-27
  • y_2024, m_2, d_23, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_241
  • loc_fr_CA, sid_330938111, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 11ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin