Porte-embout pivot

Article#00275438 Modèle#DWPVTHLD Format20DG
Porte-embout pivot
 

Caractéristiques

Porte-embout pivot. Mode pivot de 20° permettant un accès facile aux endroits difficiles. Peut être utiliser droit ou avec pivot. Qualifié pour les outils à chocs sans fil jusqu'à un couple de 200 po/lbs. En métal.

Vous pourriez aussi aimer

BOSCH
Foret pour verre et tuiles, 1/4 po
Format 1/4"
Article #19835551
Modèle #GT300
★★★★★ ★★★★★
1
(4)
BOSCH
Foret pour verre et tuiles, 3/16 po
Format 3/16"
Article #19835550
Modèle #GT200
★★★★★ ★★★★★
1
(1)
BOSCH
Foret pour verre et céramique, 5/16''
Format 5/16"
Article #19835552
Modèle #GT400
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble de forets pour carreaux de verre
Format 4MX
Article #19835447
Modèle #GT2000
★★★★★ ★★★★★
3,3
(3)
BOSCH
FORET À BÉTON
Format 5/32x6"
Article #1983025
Modèle #HC2001
★★★★★ ★★★★★
3,6
(14)
BOSCH
FORET À BÉTON
Format 5/32x6"
Article #13545467
Modèle #HCBG
★★★★★ ★★★★★
1
(2)
BOSCH
Forets plats standards Daredevil, 3 pièces
Format 3MX
Article #19835693
Modèle #DSB5003
★★★★★ ★★★★★
0
(0)
BOSCH
FORET À BÉTON
Format 3/16x3"
Article #13545469
Modèle #HCBG03
★★★★★ ★★★★★
5
(1)
BOSCH
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt
Format 1/8x2 3/4"xPK2
Article #13545442
Modèle #TI2135
★★★★★ ★★★★★
0
(0)
BOSCH
FORET À BÉTON
Format 3/16x6"
Article #1983026
Modèle #HC2011
★★★★★ ★★★★★
4,4
(16)
BOSCH
Foret à biseau large de Bosch(MC),1 ½''
Format 1/2x10"
Article #19835046
Modèle #HS1425
★★★★★ ★★★★★
4,9
(8)
BOSCH
Foret plat Daredevil(TM) régulier, 1'' x 6''
Format 1"
Article #19835690
Modèle #DSB1013
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à maçonnerie Bosch, 1/4" x 6", acier au carbone
Format 1/4x6"
Article #19836321
Modèle #LBHX004
★★★★★ ★★★★★
1
(1)
BOSCH
FORET À BÉTON
Format 3/16x6"
Article #13545470
Modèle #HCBG04
★★★★★ ★★★★★
5
(2)
BOSCH
Foret à maçonnerie Bosch, 3/16" x 6", acier au carbone
Format 3/16x6"
Article #19836320
Modèle #LBHX003
★★★★★ ★★★★★
5
(2)
BOSCH
Foret à métal en cobalt, 1/8'' x 2 3/4''
Format 1/8x2 3/4"
Article #19835213
Modèle #CO2135
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat allongé Daredevil, 3/4" x 16"
Format 3/4"x16"
Article #19835683
Modèle #DLSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Embout de tournevis carré
Format #2x6"
Article #19835339
Modèle #CCSQ2601
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble de forets Bosch à usages multiples, oxyde d'or, 29/bte
Format 29/BT
Article #19836336
Modèle #GO29
★★★★★ ★★★★★
1
(1)
BOSCH
Foret plat Daredevil(TM) régulier, 3/4'' x 6''
Format 3/4"
Article #19835687
Modèle #DSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/4'' x 6''
Format 1 1/4"
Article #19835691
Modèle #DSB1017
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/2'' x 6''
Format 1 1/2"
Article #19835692
Modèle #DSB1021
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à métal avec revêtement titane, 3/16'' x 3 1/2''
Format 3/16x3 1/2"
Article #13545446
Modèle #TI2139
★★★★★ ★★★★★
0
(0)
BOSCH
Foret à métal avec revêtement titane, 3/32'' x 2 1/4'', 2/pqt
Format 3/32x2 1/4"xPK2
Article #13545440
Modèle #TI2133
★★★★★ ★★★★★
0
(0)
BOSCH
Foret plat allongé Daredevil, 1" x 16"
Format 1"x16"
Article #19835684
Modèle #DLSB1013
★★★★★ ★★★★★
0
(0)

Spécifications techniques

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Porte-embout pivot est évalué 4.0 de 5 de 21.
Rated 4 de 5 de par Use it all the time but could use some improvemets This has become almost a permanent attachment to my impact driver. it is the only bit holder that I have found that gives you that extra few degrees of freedom to get into tight places, close to walls, into corners, etc. Generally, I like it, but it has some quirks. Quirk 1: It holds bits very tightly so that they don't fall out accidentally, but that means that the bits are very difficult to remove when the bit holder is new. While that is fine for larger bits or bits that are easily gripped (like nut drivers), for smaller bits, like 1 inch Philips, you may need the assistance of a pair of pliers. After some use, the bits become easier to remove and pliers are no longer necessary. Still a good feature because it does prevent bit loss. Quirk 2: The bit holder has a tendency to lock into "straight mode". That is, when you are drilling at an angle, the pivot wants to bend back to become straight and lock into place. This can be really annoying. You have to keep holding the black collar while drilling in order to keep the bit at the desired angle. Quirk 3: Like all bit holders, there is some wobble. This is not noticeable with short bits, but with long bits, like drill bits, the wobble is quite noticeable. In practice, this hasn't been a problem because once the bit bites the wobbling stops. Still, I would not use it for precision drilling. Overall, I like it because I have not found anything better. But it would be nice to see some improvements.
Date de publication: 2011-11-23
Rated 4 de 5 de par Impact ready bit holder I like that it is magnetic, so it holds the bits in place, while you prepare the screw-this just saves time, no dropping he bit and losing it.
Date de publication: 2013-12-23
Rated 4 de 5 de par Good product but difficult to remove bit Extremely difficult to remove bits. Otherwise great product.
Date de publication: 2013-10-14
Rated 5 de 5 de par extremely useful This little gadget from Dewalt gets it done. This bit gets more use than anything in my toolbox. Got one for everyone on my crew Bit pivots 20 degrees so I can get to those hard to reach screws and bolts.
Date de publication: 2013-09-16
Rated 4 de 5 de par practical when it's in fixed position there's no grip that you can hold onto while screwing him. When you unlock it to allow it to Pivot you are able to hold on to the lack Alder peace and the inner shaft will spin period for the price is totally worth it. If you need a 90-degree attachment this won't be a cheap way out just heads up only pivot slightly. [This review was collected as part of a promotion.]
Date de publication: 2018-10-15
Rated 3 de 5 de par Not exactly what I was hoping for This is a nice product, I was just hoping to be able to use a greater angle while putting in screws. The allowable angle isn't very sharp.
Date de publication: 2015-08-31
Rated 1 de 5 de par Worthless to me Thought it allowed interchangeable bits making it usable for different types of screws. Instead, the No. 1 Phillips bit it had in it was fixed, making it completely worthless for 98% of the uses I would have. If all you work with is small Phillips screws maybe it would be worthwhile, but for me it was a total waste of money.
Date de publication: 2018-04-18
Rated 3 de 5 de par Tool girl We bought this today and my husband could not figure how to take the drill bit out. He gave it to me (Tool Girl) and I had to research it on the web---found nothing. Then, I looked at the picture on the package it came in----it showed plyers pulling out the drill bit. Please be more clear with the written directions.
Date de publication: 2019-07-13
  • y_2020, m_4, d_3, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_fr_CA, sid_00275438, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin