Scie à métaux 16 po

N° d'article 79915233 N° de modèle 12132HT50 Format16"
Scie à métaux 16 po
 

Caractéristiques

Scie à métaux à haute tension pour des coupes droites et rapides. Conception unique en «I» pour permettre ce niveau de tension. Espace de rangement pour 5 lames de rechange. Se transforme en scie à placoplâtre. Accepte les lames de scies alternatives de marque Lenox. Poignée confortable pour manoeuvrer avec confiance dans un environnement froid ou mouillé.

Spécifications techniques

Vous pourriez aussi aimer

OLFA
Couteau utilitaire L1 Olfa à cliquet, ultra-robuste, 18 mm
Format 18MM
N° d'article 0002030
N° de modèle 5003
★★★★★ ★★★★★
0
(0)
RICHARD
Couteaux utilitaires à lames détachables, 18 mm et 25 mm
Format 25MM
N° d'article 02715590
N° de modèle 08822
★★★★★ ★★★★★
0
(0)
OLFA
Lames détachables OLFA en acier carbone, type L, 3/4", 10/pqt
Format 3/4"xCR/10
N° d'article 0002043
N° de modèle 5009
★★★★★ ★★★★★
0
(0)
OLFA
Couteau utilitaire OLFA à cliquet ultra-robuste, H-1, 1" x 10"
Format 1x10"
N° d'article 0002050
N° de modèle 5006
★★★★★ ★★★★★
4,8
(6)
OLFA
Lame robuste argentée OLFA Xtra pour couteau utilitaire, HB, 25 mm, 5/pqt
Format PK/5
N° d'article 0002054
N° de modèle 5008
★★★★★ ★★★★★
5
(13)
OLFA
Lame robuste argentée OLFA Xtra pour couteau utilitaire, HB, 25 mm, 20/pqt
Format PK/20
N° d'article 0002022
N° de modèle 9061
★★★★★ ★★★★★
0
(0)
OLFA
Lame de rechange OLFA ultra-tranchantes, LBB, 18 mm, 10/pqt
Format PK10
N° d'article 0002014
N° de modèle 9070
★★★★★ ★★★★★
4,7
(6)
RICHARD
Lames de rechange Richard pour grattoir, 5/pqt
Format PK/5
N° d'article 0271060
N° de modèle RS-2-B
★★★★★ ★★★★★
0
(0)
FULLER
Scie à gypse Fuller en acier, 6 po
Format 6"
N° d'article 70155065
N° de modèle 320-0090
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Scie à métaux à cadre solide, 12'', rouge et noir
Format 12"
N° d'article 00276747
N° de modèle CMHT20138
★★★★★ ★★★★★
4,7
(65)
OLFA
Couteau utilitaire OLFA XH-1, 25 mm
Format 25MM
N° d'article 0002064
N° de modèle 1071858
★★★★★ ★★★★★
5
(4)
OLFA
Lames OLFA Ultramax, HBB, noir, 20/pqt
Format PK20
N° d'article 00025016
N° de modèle 1082209
★★★★★ ★★★★★
0
(0)
WISS
Cisailles à tôle Wiss MetalMaster(MD), 9 3/4 po
Format 9 3/4"
N° d'article 0350045
N° de modèle M3R
★★★★★ ★★★★★
4,9
(45)
STANLEY
Lame de scie à métaux Stanley, 12 po, 24 DPP
Format 12"
N° d'article 03055864
N° de modèle 15-631
★★★★★ ★★★★★
0
(0)
FULLER
Boîte à onglets avec scie à dos de 14 po
N° d'article 70155067
N° de modèle 320-0217
★★★★★ ★★★★★
0
(0)
OLFA
Lames détachables OLFA en acier au carbone, 3/4", 50/pqt
Format 3/4"xCR/50
N° d'article 0002047
N° de modèle 5016
★★★★★ ★★★★★
5
(1)
CRAFTSMAN
Lame utilitaire de rechange, robuste, acier trempé, 10/pqt
Format 10PK
N° d'article 00276753
N° de modèle CMHT11700X
★★★★★ ★★★★★
5
(1)
LENOX
Coupe-tuyau Lenox pour espaces restreints, 1/2 po
Format 1/2"
N° d'article 79915235
N° de modèle 14830TS12
★★★★★ ★★★★★
4,6
(34)
OLFA
Lame de rechange OLFA ultra-tranchantes, LBB, 18 mm, noir, 50/pqt
Format PK/50
N° d'article 0002013
N° de modèle 9069
★★★★★ ★★★★★
4,5
(2)
IRWIN
Scie de placoplâtre en acier, 13", bleu et jaune
Format 13"
N° d'article 02445395
N° de modèle 2014100
★★★★★ ★★★★★
4,4
(7)
CRAFTSMAN
Boîte à onglets avec scie, 12", rouge et noir
Format 12"
N° d'article 00276899
N° de modèle CMHT20600
★★★★★ ★★★★★
3,8
(87)
WISS
Cisaille Wiss Metalmaster, coupe à gauche, 9 3/4"
Format 9 3/4"
N° d'article 0350043
N° de modèle M1R
★★★★★ ★★★★★
0
(0)
STANLEY
Mini scie à métaux
Format 10"
N° d'article 03055575
N° de modèle 15-809
★★★★★ ★★★★★
0
(0)
IRWIN
Scie à lames multiples ProTouch(MC) pour bois et métal, 10"
Format 10"-5 1/4"
N° d'article 02445438
N° de modèle 2015100
★★★★★ ★★★★★
0
(0)
FULLER
Coupe-tuyau, mini, 1/8 po à 7/8 po
Format 1/[email protected]/8"
N° d'article 1422001
N° de modèle 310-0002
★★★★★ ★★★★★
1
(2)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Scie à métaux 16 po est évalué 4.6 de 5 de 22.
Rated 2 de 5 de par Broke in only 2 months I had this hacksaw for about 2 months and the part to tighten the tension broke on it already making the saw useless. The first two times I changed the blade everything was fine but the third time I went to change it the thing only turned 9 times instead of the 12 it was supposed to and then It got tight and wouldn't move any more then a few days later when I went to use it the metal rod inside had broke and the thing you use to tighten it on top was just laying next to it.. Overall the rest of hacksaw is made high quality however the rod that actually tightens it is made out of a cheap weaker metal that breaks easily and for a top of the line hacksaw I would expect better.
Date de publication: 2014-10-03
Rated 4 de 5 de par Don't over torque The design of this saw is very good. It allows one to use two hands to apply more pressure if desired. It also has a nice feature of adding a small reciprocating blade to the front for getting in tight spots. While the frame is plenty strong, be careful not to go nuts on torquing the blade. While really torquing the blade, I broke the tightening mechanism that is in the handle. I was surprised to find out that Lenox made the tightening mechanism out of pot metal. The "50,000 psi" boldly written on the handle kind of leads one to think that you tighten the snot out of the thing. Don't do it. Who knows what kind of test Lenox did to come up with that. You can tighten it really good, but be careful not to break the mechanism by going nuts. When I brought it back to Lowes, they exchanged it no problem.
Date de publication: 2013-10-12
Rated 5 de 5 de par best hacksaw i ever used. I thought that since i didnt use one much,after 40 years of using my old $6.00 dollar stan by,and years of nuckle busting,blade bending or comming off if i dropped it.I decided to buy this one,i could have kicked myself in the tail because this should have been what i used long time ago, alot of thought went into the making of this saw, thanks Mr Lenox.
Date de publication: 2013-06-25
Rated 4 de 5 de par Great saw but watch for quality control issue My first high quality hack saw. Decided to buy after cutting some 1/8 aluminum with a basic Stanley saw (Lennox blade). Not a major task, but after reading reviews of high tension saws, I thought I could cut better with this saw. And correct. Able to cut faster and hold cut line much better. Just can't tension those basic saws enough. The down side: make sure you check that you can release the blade before leaving store. As a review on another site mentions, the quality control at Lennox leaves much to be desired. Got home and the blade would not release. The pivot arm that tensions the blade is to long near the pin on some items. If you don't see a gap between the arm and the frame (see photo), get another. Two out of the four on the rack were bad. The blade should easily release upon loosening. Clerk indicated I wasn't first return for this problem. Tightening. I was concerned about tightening the 12 turns recommended after reading other reviews here. Cut fine with 10. Plus, 12 turns from what? I started counting from point I just was able to slip on blade. There are no directions on package, nor on Lennox website. Come on, it may not take a genius to load and tighten a hacksaw, but a couple of sentences on the package would help.
Date de publication: 2017-02-05
Rated 4 de 5 de par Very good purchase Hacksaws are hacksaws, but I am satisfied with this one. Good value, well balanced
Date de publication: 2013-07-01
Rated 5 de 5 de par Saved me from having to drill out a broken screw I had a #6 screw head break off in a VERY tight space, with only about 1/8" of shank still sticking up. I wasn't inclined to give up on the screw hole, so I said a prayer and gave the needle-nose Vise Grips a shot. They performed admirably. Quarter turn by quarter turn, I managed to back out the screw--slowly, but with no difficulty. Project saved!
Date de publication: 2020-06-27
Rated 5 de 5 de par IRWIN VISE-GRIP Original 6-in Long Nose Locking Pl [This review was collected as part of a promotion.] For the cost I was surprised at the durability and strength is has. Built well compared to another set I tossed out as the long nose twisted when trying to use it for just about anything.
Date de publication: 2019-07-15
Rated 5 de 5 de par Holds on tight [This review was collected as part of a promotion.] Needed this for a special project. It fill the bill. Own many tools but had to get this one to accomplish the finish to my project.
Date de publication: 2018-10-22
  • y_2021, m_3, d_6, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_fr_CA, sid_79915233, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin