Décor d'HalloweenDécorations gonflablesÉclairage et effets spéciaux Décorations d'intérieurDécorations d'extérieur

Scie emporte-pièce à grains de diamant, 3/8 po

Article#79915274 Modèle#121096DGDS Format3/8"
Scie emporte-pièce à grains de diamant, 3/8 po
 

Caractéristiques

Cette scie emporte-pièce à grains de diamant Lenox Tools vous offre uns capacité de coupe supérieure. Conçue pour percer des trous dans les panneaux de fibrociment, le carrelage, la pierre et autres matériaux abrasifs, la lame de cette scie emporte-pièce résiste aux matériaux les plus durs. La surface de la lame recouverte de poussière de diamant fournit une capacité de coupe à long terme sans devoir utiliser de mandrin.

Vous pourriez aussi aimer

CRAFTSMAN
Scie emporte-pièce avec mandrin, bi-métal, 2 1/2"
Format 2 1/2"
Article #00276917
Modèle #CMAH1212A
★★★★★ ★★★★★
4,7
(13)
TACTIX
Ensemble d'installation pour poignée de porte
Article #79285069
Modèle #440384
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Scie emporte-pièce pour luminaire encastré, bi-métal, 4"
Format 4"
Article #00276918
Modèle #CMAH34RL
★★★★★ ★★★★★
3
(2)
VERMONT AMERICAN
Scie emporte-pièce bimétallique, 2 1/8 po
Format 2 1/8"
Article #1354096
Modèle #18534
★★★★★ ★★★★★
0
(0)
DEWALT
Scie emporte-pièce bimétal, 2 po
Format 2"
Article #0794111
Modèle #D180032
★★★★★ ★★★★★
0
(0)
BOSCH
Scie emporte-pièce 3 1/2 po
Format 3 1/2"
Article #19835321
Modèle #HB350
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Scie emporte-pièce, bimétal, sans arbre, 1 1/2", noir
Format 1 1/2"
Article #00276732
Modèle #CMAH1112U
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Scie emporte-pièce bimétallique, sans arbre, 1 3/4", noir
Format 1 3/4"
Article #00276831
Modèle #CMAH1134U
★★★★★ ★★★★★
4,7
(3)
VERMONT AMERICAN
Scie emporte-pièce bimétallique, 2 1/2 po
Format 2 1/2"
Article #1354098
Modèle #18540
★★★★★ ★★★★★
0
(0)
DEWALT
Ensemble scies emporte-pièce et mandrins, Dewalt, 13 pièces
Format ST/13
Article #0027265
Modèle #D180005
★★★★★ ★★★★★
0
(0)
DEWALT
Scie emporte-pièce bimétal, 1 5/8 po
Format 1 5/8"
Article #0794206
Modèle #D180026
★★★★★ ★★★★★
0
(0)
BOSCH
Ensemble de scies emporte-pièce
Format 19MX
Article #19835298
Modèle #HB19EL
★★★★★ ★★★★★
0
(0)
DEWALT
Scie emporte-pièce bimétal, 2 1/8 po
Format 2 1/8"
Article #0794113
Modèle #D180034
★★★★★ ★★★★★
0
(0)
SCIE EMPORTE-PIÈCE 3 3/4 PO
Format 3 3/4"
Article #3459087
Modèle #1054832
★★★★★ ★★★★★
0
(0)
BOSCH
Scie emporte-pièce 3 5/8 po
Format 3 5/8"
Article #19835322
Modèle #HB363
★★★★★ ★★★★★
0
(0)
BOSCH
Scie emporte-pièce 4 po
Format 4"
Article #19835325
Modèle #HB400
★★★★★ ★★★★★
0
(0)

Spécifications techniques

Type :Scie emporte-pièce Composante :Diamant Utilisations :Pour percer les panneaux de fibrociment, le carrelage, la pierre et autres matériaux abrasifs Diamètre :3/8 po (9,52 mm) Emballage :1 unité
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Scie emporte-pièce à grains de diamant, 3/8 po est évalué 4.6 de 5 de 16.
Rated 5 de 5 de par Worth the money Wasted about $30 going through the other type of tile bit - the one that looks like a little auger. Toiled for over 20 minutes (and by that I mean I was pushing and spraying and modulating ... anything to get the other bit to work), even trying smaller sizes first, to get the other type to make its way through ceramic tile. Was very frustrated and opened this one (which I bought "just in case"). I finished the original hole plus three others within 5 minutes of using this bit. It is totally worth the money. It is tricky when starting the hole as you have to hold it at an angle at first and basically eyeball the dead center of where the hole will be, but when using toggle bolts you will have some swag to work with.
Date de publication: 2015-08-23
Rated 5 de 5 de par Hudson Construction, Fair Oaks, CA. I needed to drill through some extremely strong tiles to install fasteners. I could not risk cracking the tiles. So I bought this diamond tip bit. I have drilled 12 holes and still have enough tip left to probable drill 2 to 4 more. If you have never used a drill bit like this keeping it cool with water and drilling slowly with medium pressure is key. No water and too much pressure will burn up this bit in 1 hole. Removing the bit from the hole and squirting water in the hole before it dries out is needed. Pulling the bit in and out through a wet sponge work well also. I use the smallest tile bit I have to start because sometimes these bits want to wonder. So get a indentation so this bit can be placed more accurately.
Date de publication: 2017-01-27
Rated 4 de 5 de par Does the Job This Hole Saw did the trick sawing through both ceramic tile & cement board. But, it's only good for a couple of times. Wears out quickly. Using water to cool is a MUST. Failure to use water to cool while using will shorten the life of the tool.
Date de publication: 2015-01-24
Rated 5 de 5 de par 12 holes and still going I installed 2 toto toilets on a concrete slab with tile. Each toilet had 6 screws that went thru tile. I used the diamond hole saw with ease. I used a spray bottle to cool the bit. Just a little puddle around the area being drilled and I would lift the bit after a few seconds and fill the cut area with water. Went thru easily and I can continue using it on more protects. I used a roto hammer for the concrete.
Date de publication: 2016-11-23
Rated 5 de 5 de par Great for porcelain tile, affordable and effective You can use this for 3/8 inch holes or make multiple connecting holes for a larger diameter hole. I used this for a shower spout hole s well as 3/8 inch holes for hanging a towel bar in the shower. [This review was collected as part of a promotion.]
Date de publication: 2018-12-20
Rated 5 de 5 de par Drills thru hard Porcelin tile Best results are with a cordless drill on its lowest speed setting, with someone spraying water( a spray bottle works just fine) to help the cutting process.
Date de publication: 2015-02-11
Rated 5 de 5 de par Diamond hole saw. Worked as promised. Drilled two holes in plate glass window. No problems.
Date de publication: 2017-10-08
Rated 5 de 5 de par Diamonds aren't just for the ladies I bought this because I was in a pinch. I had just rebuilt a pressure washer that looks like it came out of the walking dead. Last thing I had to do was put on a new muffler and spark arrestor. Surprise surprise, the exhaust studs were seized. One came out after some persuasion. One broke. Not to worry, just drill it out, grab the extractor set and we're home free. Wrong. Extractor broke inside the broke stud. Now what? Can't drill into an extractor, it's too hard. But what if I drill, or cut, around it??? Went over to lowes and hit up the tool aisles, found some small hole saws, went back home to try it out. THIS WORKED GREAT!!! It was slow, but it worked like a charm. The pressure washer still looks like it fell off the back of a truck at a landfill but believe you me it runs amazing and purrs like a kitten. If you have a broken stud with a broken extractor, broken drillbit, or a broken tap.....get yourself some diamond hole saws and pack your patience. It'll work. [This review was collected as part of a promotion.]
Date de publication: 2019-03-03
  • y_2019, m_12, d_8, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_fr_CA, sid_79915274, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin