Serre-joint

N° d'article 0244228 N° de modèle 2026501 Format48"
Serre-joint
 

Caractéristiques

Profondeur des mâchoires de 3 3/4 po pour optimiser la distribution de la pression. Système de barrage qui permet de prévenir le glissement des mâchoires. Poignée « ProTouch » ergonomique. Mâchoires en résine qui ne marque pas et qui n'adhère pas à la colle. Pression jusqu'à 1150lb.

Spécifications techniques

Vous pourriez aussi aimer

IRWIN
Ensemble de 4 mini serres, Irwin Quick, résine
Format ST4
N° d'article 0244224
N° de modèle 1964758
★★★★★ ★★★★★
4,7
(34)
CHANNELLOCK
Pince pour filtre à l'huile 12 po
Format 12"
N° d'article 75185012
N° de modèle 212
★★★★★ ★★★★★
0
(0)
FULLER
Paire de pinces d'électricien, acier, 8", noir et rouge
Format 8"
N° d'article 01215060
N° de modèle 406-1948
★★★★★ ★★★★★
0
(0)
FULLER
Pince coupante diagonale, 7", rouge et noir
Format 7"
N° d'article 01215055
N° de modèle 406-1907
★★★★★ ★★★★★
0
(0)
KC PRO
Serre en C
Format 3X2"
N° d'article 0033116
N° de modèle 94404
★★★★★ ★★★★★
0
(0)
KC PRO
Serre en C, KC Pro, 2" x 1"
Format 2X1"
N° d'article 0033113
N° de modèle 94401
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Pinces multiprises, 10", acier, rouge et noir
Format 10"
N° d'article 00277050
N° de modèle CMHT81720
★★★★★ ★★★★★
4,9
(20)
FULLER
Pince coupante diagonale, 6", rouge et noir
Format 6"
N° d'article 01215054
N° de modèle 406-1906
★★★★★ ★★★★★
0
(0)
VISE-GRIP
Pince-étau
Format 10"
N° d'article 0244004
N° de modèle 10WR-3
★★★★★ ★★★★★
4,9
(25)
FULLER
Pare de pinces multiprises, 12", acier, noir et rouge
Format 12"
N° d'article 01215051
N° de modèle 401-0114
★★★★★ ★★★★★
0
(0)
FULLER
Paire de pinces d'électricien, acier, 7", noir et rouge
Format 7"
N° d'article 01215059
N° de modèle 406-1947
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Mini pince diagonale, 7''
Format 7"
N° d'article 00277046
N° de modèle CMHT81647
★★★★★ ★★★★★
4,6
(41)
CRAFTSMAN
Pince à long bec, 8", acier, rouge et noir
Format 8"
N° d'article 00276937
N° de modèle CMHT81645
★★★★★ ★★★★★
4,7
(25)
FULLER
Pince à dénuder en acier, rouge et noir
N° d'article 01215354
N° de modèle 311-1201
★★★★★ ★★★★★
0
(0)
IRWIN
Serre
Format 4"
N° d'article 0244199
N° de modèle 59430CD
★★★★★ ★★★★★
3,9
(71)
VISE-GRIP
Pince-étau
Format 7"
N° d'article 0244005
N° de modèle 7WR-3
★★★★★ ★★★★★
5
(1)
CRAFTSMAN
Pince diagonale coupante, 6", acier, rouge et noir
Format 6"
N° d'article 00276936
N° de modèle CMHT81646
★★★★★ ★★★★★
4,6
(34)
MALCO
ARRACHE DÉCLIN «SIDESWIPER»
N° d'article 39205018
N° de modèle SRT2
★★★★★ ★★★★★
1
(1)
FULLER
Paire de pinces multiprises, 10", acier, noir et rouge
Format 10"
N° d'article 01215050
N° de modèle 401-0113
★★★★★ ★★★★★
0
(0)
QUICK-GRIP
Serre-joint
Format 6"
N° d'article 0244139
N° de modèle 1964742
★★★★★ ★★★★★
0
(0)
KC PRO
Serre à ressort
Format 1"
N° d'article 0033058
N° de modèle 94694
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Pinces multiprises, 8'' et 10'', ensemble de 2
Format 8"x10"x2MX
N° d'article 00276941
N° de modèle CMHT82547
★★★★★ ★★★★★
4,9
(36)
KC PRO
Serre en C
Format 2 1/2X2 1/2"
N° d'article 0033115
N° de modèle 94403
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Pinces d'électricien, acier, 8", rouge et noir
Format 8"
N° d'article 00277079
N° de modèle CMHT81648
★★★★★ ★★★★★
4,9
(32)
KC PRO
Serre en C
Format 4X3"
N° d'article 0033117
N° de modèle 94405
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Serre-joint est évalué 4.3 de 5 de 38.
Rated 5 de 5 de par The clamps work very well I am pretty new to wood working, but needed some long clamps for making table tops. I picked up a couple of these and they worked out very well. They provide impressive compression force and are well designed and constructed with durable materials. I have not had them long, but they seem like they will last a long time.
Date de publication: 2015-06-15
Rated 3 de 5 de par Performs well; some areas to improve The advantage of these clamps over lighter duty bar clamps is that they do not flex very much in use and the jaws stay parallel. The attached photo is of some glass panel doors in hard maple I'm working on. I've been woodworking for over 25 years so I feel confident in saying that a well-cut and properly-fitted joint should not need a lot of force to hold it together during glueup. Typically, you would want to overcome some small amount of warpage of the wood and hold the assembly square and true, but you can compensate for warping as you machine and fit your pieces. For those who say that these clamps provide inadequate pressure to pull wood together (see other reviews), I would say if you need that much pressure, you're doing something wrong with your woodworking. No glue joint under a considerable amount of residual stress will survive long. Also, a joint subjected to too much pressure will be starved of glue (squeezed out), making it weak. So, while you may be able to pull a joint together that way (and the mechanical advantage of the handscrew will certainly provide all the force you need), you are building a lot of residual forces in the joint that way, and over time, the joint will certainty fail. These Irwin clamps sit very well on the bench in a jaws-up position which is essential for panel and frame assembly. In comparing these Irwin clamps to my similarly designed Bessey K3.550's (seen in the background of the picture), functionally they work about the same. The Bessey clamps have a bar with teeth on them for the clamp to index into (see photo); the Irwin clamps have a smooth bar. I found you have to back the Irwin hands-free off pretty far to be able to reposition it on the bar, mildly annoying, earning 3 of 5 stars. The Bessey clamps are easier to adjust. Clamping pressure is adequate for woodworking. The rubberized handles give you good grip; my Bessey clamps have wooden handles which don't provide non-slip grip, but that has never been a problem. Incidentally, is give the Bessey clamps 4 of 5 stars, jus' sayin! If you REALLY want clamping pressure, you can't beat the heavy I-beam Jorgenson clamps, but that's overkill IMO. I very, very rarely use them. (Photo)
Date de publication: 2017-08-27
Rated 5 de 5 de par smooth jaw action, works as well as old Bess... FIrst, I have two 48” Bessey parallel clamps and both of them are mystifying me because they are so difficult to open and move the jaws inward. So when i saw these Irwin clamps at a somewhat better price, I bought two just to see if they would perform like old Bess. It turns out they do. I have no trouble adjusting the movable jaw, get more than adequate pressure for glue ups, and the squeeze out of glue that dries on the bar is MUCH easier to remove than on old Bess. I’m sold. Ill be adding more 48” clamps to my collection and getting at least four of the shorted length clamps too.
Date de publication: 2020-04-19
Rated 4 de 5 de par Greaat clamps These are great clamps and i would have given 5 stars but they are a little heavy. I built a table for my Daughter and need 48 inch clamps to clamp 3 pcs of cypress together and a different stores 48 inch clamps only opened to 42 1/2 inches and they were made very cheap.The clamps from Lowes are very heavy duty and do open to the 48 inches. Glued up the 3 11 1/2 x 2 inch thick with 3/8 dowels and number 20 biscuits and started squeezing and all 3 boards pulled together with no gaps. I am very satisfied with this product.
Date de publication: 2017-11-25
Rated 2 de 5 de par Non-parallel jaw clamp On the clamp I purchased, the fixed jaw was out of square by approximately 5/16". When closed, the jaws touched at the top, with a large gap at the bottom.
Date de publication: 2019-11-02
Rated 5 de 5 de par Clamp Irwin [This review was collected as part of a promotion.] If you need long distances of clamping, this is your answer. Forget about the rest and choose the best.
Date de publication: 2019-01-13
Rated 4 de 5 de par Large Clamp [This review was collected as part of a promotion.] This clamp has great padding and a strong grip. For the price, it well exceeded my expectations when compared to other plastic housed clamps. Although plastic on the outer shell, the inside liner is reinforced with a aluminum. Strong clamp and would purchase another.
Date de publication: 2018-09-27
Rated 4 de 5 de par 48 inch clamp [This review was collected as part of a promotion.] I had to clamp a granite counter top so I could glue 2 pieces together. Clamp worked great and was easy to adjust and remove once the 2 pieces dried .
Date de publication: 2018-08-25
  • y_2021, m_5, d_11, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_38
  • loc_fr_CA, sid_0244228, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin