Support pour scie à onglet

Article#00275686 Modèle#DWX723
Support pour scie à onglet
 

Caractéristiques

Ce support universel de scie à onglet robuste de concept universel s'adapte aux scies de toutes les marques. Sa conception légère (35 lb) en aluminium permet de transporter facilement la scie du chantier à la maison. La poutre de 5 1/2 pi s'allonge pour soutenir jusqu'à 16 pi et jusqu'à 400 lb de matériau. Les pattes assurent un soutien supérieur et se replient pour faciliter le rangement. Les butées d'arrêt du support peuvent être repositionnées rapidement pour plus de polyvalence, et les pieds munis d'embouts anti-égratignures n'abîmeront pas les matériaux. Scie vendue séparément.

Vous pourriez aussi aimer

BOSCH
Scie à onglet coulissante à deux biseaux, 12''
Format 12"x15AM
Article #19835411
Modèle #GCM12SD
★★★★★ ★★★★★
4,6
(39)
METABO HPT
Scie à onglet combinée, biseau simple, Metabo HPT, 10''/15 A
Format 10"x15A
Article #37815225
Modèle #C10FCGSM
★★★★★ ★★★★★
4
(2)
MAKITA
Scie à onglets coulissante 10 po
Format 10"x13AM
Article #11975297
Modèle #LS1018LX2
★★★★★ ★★★★★
0
(0)
BOSCH
Scie à onglet coulissante Bosch, deux biseaux, 10''
Format 10"x15AM
Article #19835716
Modèle #CM10GD
★★★★★ ★★★★★
4,5
(4)
MAKITA
Scie à onglets au laser 10 po
Format 10"x13AM
Article #11975214
Modèle #LS1018L
★★★★★ ★★★★★
0
(0)
MAKITA
Scie à onglets combinés à coulisse - 8 1/2 po
Format 8 1/2"x10.5AM
Article #11975335
Modèle #LS0815FL
★★★★★ ★★★★★
5
(1)
MAKITA
Scie à onglets avec support, 10", 15 A
Format 10"x15AM
Article #11975392
Modèle #LS1019X1
★★★★★ ★★★★★
0
(0)
BOSCH
Support pour scie à onglet Gravity-Rise, gris
Article #1983257
Modèle #T4B
★★★★★ ★★★★★
4,7
(13)
MAKITA
Scie à onglets combinée coulissante, 10", 15 A
Format 10"x15AM
Article #11975391
Modèle #LS1019
★★★★★ ★★★★★
1
(1)
METABO HPT
Scie à onglets double combinée avec laser, 10", 3800 tr/min
Format 10"x15AM
Article #37815175
Modèle #C10FSHCM
★★★★★ ★★★★★
3,5
(90)
MAKITA
Scie à onglets combinés à coulisse sans-fil, 18 V, 10''
Format 10"x18V
Article #11975464
Modèle #DLS112Z
★★★★★ ★★★★★
0
(0)
METABO HPT
Scie à onglet coulissante à double biseau avec laser, 12"
Format 12"x15AM
Article #37815204
Modèle #C12RSH2M
★★★★★ ★★★★★
4,5
(125)
METABO HPT
Support pour scie à onglets de 12", 8', capacité de 400 lb
Article #37815176
Modèle #UU240FM
★★★★★ ★★★★★
3,9
(78)
METABO HPT
Scie à onglets multivolt Metabo HPT, 36 V, 10''
Format 10"x36V
Article #37815201
Modèle #C3610DRAM
★★★★★ ★★★★★
4,9
(8)
DEWALT
Scie à onglet combiné coulissante, DeWalt 12", 15 A
Format 12"x15AM
Article #00276378
Modèle #DWS779
★★★★★ ★★★★★
4,8
(394)
CRAFTSMAN
Scie à onglets pliante de 10", 15 A
Format 10"x15AM
Article #41537043
Modèle #CMXEMAR120
★★★★★ ★★★★★
4,1
(64)
DEWALT
Scie à onglets combinée, 12", biseau unique
Format 12" 15AM
Article #00277181
Modèle #DWS715
★★★★★ ★★★★★
4,8
(52)
YAHU
Support universel pour scie à onglets
Format 65x22.8x35.8"
Article #22745004
Modèle #YH-MS049
★★★★★ ★★★★★
4,5
(4)
DEWALT
Support pour banc de scie, pliable et portatif
Article #00276275
Modèle #DW7451
★★★★★ ★★★★★
4,6
(5)
DEWALT
Scie à onglets combinée, 15 amp., 10"
Format 10" 15AM
Article #00277180
Modèle #DWS713
★★★★★ ★★★★★
5
(3)
CRAFTSMAN
Scie à onglet coulissante sans-fil Craftsman, 20V MAX, 7 1/4''
Format 7 1/4"x20V
Article #00277177
Modèle #CMCS714M1
★★★★★ ★★★★★
4,7
(35)
DEWALT
Support pour scie à onglets, métal, jaune
Article #00276383
Modèle #DWX725B
★★★★★ ★★★★★
4,6
(23)
DEWALT
Scie à onglet combinée coulissante, 12", 15 A
Format 12"x15AM
Article #00275512
Modèle #DWS780
★★★★★ ★★★★★
4,8
(216)
DEWALT
Scie à onglets combinée coulissante à batterie, 20V MAX
Format 7 1/4"x20V
Article #00275878
Modèle #DCS361B
★★★★★ ★★★★★
4,7
(75)

Spécifications techniques

Garantie :Garantie limitée de 3 ans, contrat de service gratuit d'un an, garantie de remboursement de 90 jours Hauteur :6" (plié) - 32" (déplié) Largeur :72" (plié) - 150" (déplié)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Support pour scie à onglet est évalué 4.7 de 5 de 225.
Rated 5 de 5 de par A BIG HELPER Purchased this stand wtih the DWS780 today. I put the stand together, 10 minutes and put the saw on it and love this stand. Do not know how I ever worked without one. Just the righ height for me. Love the stops, how the extend. I build cedar chest and cedar swings, so I cut a lot of boards the same length. This stand will save me 15 to 30 minutes per project. Stand seems to be of good quality. Everything is easy to adjust on it. A little tricky at first getting the saw on and off ot it but I think that has more to do with the bulkness of the saw. Would definitely recommend this stand for anyone who has a miter saw.
Date de publication: 2013-08-26
Rated 4 de 5 de par Sturdy stand, easy to set up I was looking to buy a cheaper brand but that stand that was not available in the store. So I bought the Dewalt instead. I use it for a Hitachi 12 inch, 15 amp miter saw. The stand sets up out of the box very quickly. The instructions say to use plywood hen mounting a saw not made by Dewalt. However, I found my Hitachi mounted directly to the stand with no problems using the hardware provided. The stand is very sturdy. A minor issue for me is the supports at the end of the beams are still a little short when fully raised to hold work truly level with the surface of my Hitachi. I'll adjust with a wood shim. I am happy with the purchase.
Date de publication: 2014-07-22
Rated 5 de 5 de par Very solid stand! This is a solid stand. Very easy to set up and take down. The only flaw I have found is that the carry handle is on the bottom and it is the lowest point when the legs are folded in. So to store the stand you have to remove the saw as well as the saw stops on the ends. I don’t know how to make this better though so this gets 5 stars. Just something to be aware of. This is a great stand with this one minor note. This thing extends over 12 1/2 feet and is less than 6ft when retracted. All moving parts are solid with little to no play. The mounting brackets are strong with an easy lock and release mechanism. Get it! [This review was collected as part of a promotion.]
Date de publication: 2019-12-16
Rated 5 de 5 de par DeWalt Quality When it came time to renovate my basement, I knew I would need to update my old DeWalt 18v tools. My wife gave me clearance to buy every tool I would need. I’ve always been a fan of DeWalt, so it was an easy choice. I loaded up on DeWalt 20v tools and a new miter saw. I’ve been wanting this saw for a while and decided now was the time. I wish I would have bought this years ago. I use it for everything. Superb quality and very easy to use. If you are reading this, just buy it. You will not regret it. [This review was collected as part of a promotion.]
Date de publication: 2018-11-16
Rated 5 de 5 de par Heavy duty, yet surprisingly light weight I'm a handyman professional, and I am hauling tools around with me every day. This is my 3rd saw stand, and unquestionably the best so far. Pros: Strong - able to support heavy materials Long - able to support a broad range of material length Light - easy to haul around to jobsites Details - locking levers and legs work smoothly and reliably without slippage, nice carrying handle Cons: Size - Even when folded, it's almost 6' long. That's the price you pay for a stand which can support 16' long material! I've had smaller stands, but they were heavier than this one, and the arms and supports would slip out of position too easily. [This review was collected as part of a promotion.]
Date de publication: 2018-12-07
Rated 1 de 5 de par disappointed Bought the saw stand on Saturday. Looking forward to starting a new framing job on Monday. Unfortunately the end stop support assemblies, which are held to the slide out tubes would not tighten. After inspection the thread in the tube end is spot welded to 1mm sheet metal which just keeps distorting as you tighten the attachment screw. Consequentially you get useless floppy supports and stops. Very disappointed in this DeWalt product.
Date de publication: 2018-03-19
Rated 5 de 5 de par Versatile addition for a miter saw. Came free with purchase of Dewalt DWS780 miter saw. Great for DIY homeowners who work alone a lot. Supports up to 16ft of lumber. Built in end stops great for same length repetative cuts. Holds a lot of weight and folds up and doesn't take much room to store.
Date de publication: 2013-10-28
Rated 1 de 5 de par Poor Quality I'm not a contractor, just a home gamer who uses his miter saw 4-5 times per year. I thought having this stand and the miter saw would give me a good setup that I could store away conveniently. This was the case for four years, but the last time I used the saw both of the stand clamps clicked into place and then barfed small metal parts all over the floor. It was really fun to pick all those up, then scratch my head about where they went. Reassembling the clamps did not yield working parts, so I get to replace them. If I was a contractor, I would imagine that this failure would happen within a couple of months of purchase, as I would estimate the number of times I used this setup to be under 20.
Date de publication: 2019-06-27
  • y_2020, m_4, d_1, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_225
  • loc_fr_CA, sid_00275686, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin