Obtenez 200 milles AIR MILES^md en prime avec le code promo 1636. Détail

Get 200 AIR MILES® Bonus Miles with the promo code 1636.Detail

L'article sera livré en bordure de trottoir en raison des restrictions de poids

Item will be delivered curbside due to weight restrictions

Nos magasins sont ouverts pour répondre à vos besoins essentiels. Voir les restrictions COVID. Détail

DEWALT

Support roulant pour scie à onglets de DeWalt, ajustable, noir et jaune, en acier

N° d'article 00275591 N° de modèle DWX726

Obtenez 200 milles AIR MILES^md en prime avec le code promo 1636. Détail

Get 200 AIR MILES® Bonus Miles with the promo code 1636.Detail

L'article sera livré en bordure de trottoir en raison des restrictions de poids

Item will be delivered curbside due to weight restrictions

Nos magasins sont ouverts pour répondre à vos besoins essentiels. Voir les restrictions COVID. Détail

Caractéristiques

Ce support pour scie à onglet DWX726 de DeWalt offre un rouleau d'entrée et de sortie ajustable pouvant soutenir jusqu'à 8 pieds de matériaux. Les rails de montage ajustables conviennent à presque n'importe quelle scie à onglet. Les grandes roues en caoutchouc facilitent le transport. Ce support pour scie à onglet a également un levage et un abaissement assisté pneumatiques à trois positions pour une flexibilité optimale et une installation facile. La construction tubulaire en acier offre une capacité maximale de 300 lb. Il se range à la verticale pour optimiser son efficacité en milieu de travail et faciliter le transport.

Large table support de pièce ajustable à cylindre d'entrée et de sortie pouvant soutenir un maximum de 8 pieds de matériaux
Les rails de montage facilement réglables s'adaptent à presque n'importe quelle scie à onglets ou raboteuse portable.
Les larges roues en caoutchouc facilitent la mobilité sur le chantier.
Montée et descente pneumatiques assistées à trois positions qui optimisent la flexibilité et facilitent la mise en place
La construction tubulaire en acier durable permet de supporter une charge maximale de 300 lb
Le support se range à la verticale de façon compacte pour optimiser l'efficacité en milieu de travail et faciliter le transport.
Le montage simple et unique minimise les temps d'arrêt

Spécifications techniques

Ajustable :Oui Poids de l'article assemblé (kg) :30,3912 Poids de l'article assemblé (lb) :67 Hauteur (cm) :82,55 Hauteur (po) :32.5 Hauteur (mm) :825,5 Mise en garde concernant le produit :Scie à onglets non incluse Longueur (cm) :152,4 Longueur (po) :60 Longueur (mm) :1524,0 Matériau :Acier Modèle à roulettes :Oui Nom de la gamme :S.O. Type :Onglet Garantie :Limitée de 3 ans Capacité de charge (kg) :136,08 Capacité de charge (lb) :300 Largeur (cm) :63,5 Largeur (po) :25 Largeur (mm) :635,0

Produits fréquemment achetés ensemble

DEWALT

Support pour scie à onglets réglable de DeWalt, en aluminium, 29 lb

N° d'article 00275686

Support pour scie à onglets de chez DeWalt, métal, jaune

N° d'article 00276383

Support pour banc de scie DW7451 de DeWalt, pliable et portatif, noir, 14 lb

N° d'article 00276275

Support pour scie à onglets de Metabo HPT, capacité de 400 lb, en acier, universel

N° d'article 37815176

Remorque extensible en acier galvanisé, 5' x 10'

Format 5x10'

N° d'article 22435002

Remorque extensible en acier galvanisé Stirling Trailers, 4 pi x 8 pi

Format 4x8'

N° d'article 22435000

Remorque extensible en acier galvanisé, 5' x 8'

Format 5x8'

N° d'article 22435001

Remorque utilitaire Stirling Trailers en acier de 4 pi x 6 pi avec rampe d'accès

Format 4x6'

N° d'article 22435005

Remorque à panneau arrière amovible, 3 1/2 pi x 5 pi, noir

Format 3.5x5'

N° d'article 30738276

N° de modèle 3.5X5LSHS

Remorque utilitaire à grille métallique Carry-On Trailer Nouvelle Génération de 5 pi x 8 pi

Format 5x8'

N° d'article 31475039

N° de modèle 5X8G-GEN

★★★★★ ★★★★★

3,8

(28)

Vous pourriez aussi aimer

METABO HPT

Scie à onglet combinée, biseau simple, Metabo HPT, 10 po, moteur 15 A

Format 10"x15A

N° d'article 37815225

N° de modèle C10FCGSM

Scie à onglet coulissante à deux biseaux de chez Bosch, 12 po

Format 12"x15AM

N° d'article 19835411

Scie à onlgets combinée Dewalt coulissante 12 po moteur 15 A 3800 tr/min

Format 12"

N° d'article 00277597

Scie à onglets Kobalt à fil combiné, coulissant à simple biseau, 7 1/4 po, 10 A

Format 7 1/4"x10AM

N° d'article 89335003

N° de modèle SM1816LW

Scie à onglet combinée Dewalt 12 po biseau double moteur 15 A

Format 12"

N° d'article 00277596

Scie à onglets combinée de chez DeWalt, 15 A., 10 po

Format 10" 15AM

N° d'article 00277180

Scie à onglets au laser Makita, coulissante, 10 po 13 A

Format 10"x13AM

N° d'article 11975214

Support roulant pour scie à onglets Gravity-Rise de Bosch, gris, capacité de 300 lb, en acier

Scie à onglets multivolt Metabo HPT, 36 V, 10''

Format 10"x36V

N° d'article 37815201

N° de modèle C3610DRAM

Scie à onglets combinée coulissante à batterie, 20V MAX, outil seul (sans batterie)

Format 7 1/4"x20V

N° d'article 00275878

Support pour scie à onglets réglable de DeWalt, en aluminium, 29 lb

N° d'article 00275686

Support pour scie à onglets de chez DeWalt, métal, jaune

N° d'article 00276383

Support pour banc de scie DW7451 de DeWalt, pliable et portatif, noir, 14 lb

N° d'article 00276275

Scie à onglets coulissante à simple inclinaison Bosch, 18 V, lame de 8 1/2 po

Format 8 1/2"x18V

N° d'article 19836362

N° de modèle GCM18V-08N

★★★★★ ★★★★★

(0)

CRAFTSMAN

Scie à onglet coulissant à biseau simple de 10 po de chez Craftsman

Format 10"x15AM

N° d'article 97925012

N° de modèle CMXEMAX69434501

Support pour scie à onglets de Metabo HPT, capacité de 400 lb, en acier, universel

N° d'article 37815176

Scie à onglet coulissante à double biseau avec laser de chez Metabo HPT, 12 po

Format 12"x15AM

N° d'article 37815204

N° de modèle C12RSH2SM

Support pour scie à onglets pliable Bosch en métal

N° d'article 19835636

Scie à onglet mixte coulissante Kobalt à double biseau avec cordon, 10 po, 15 A

Format 10"x15AM

N° d'article 89335012

N° de modèle SM2517LW

Scie à onglet coulissante sans-fil Craftsman, 20V MAX, 7 1/4''

Format 7 1/4"x20V

N° d'article 00277177

N° de modèle CMCS714M1

Scie à onglets combinée coulissante de chez Makita, 10 po, 15 A

Format 10"x15AM

N° d'article 11975391

Support roulant pour scie à onglets de Kobalt, réglable, en acier, capacité de 400 lb

N° d'article 97925011

Scie à tronçonner Dewalt de 14 po

Format 14" 15AM

N° d'article 00277232

Scie à onglets Bosch de 18 V avec accessoires, 12 po

Format 18V-12"

N° d'article 19836447

N° de modèle GCM18V-12GDCN14

★★★★★ ★★★★★

(2)

Does the stand come with rollers and length stop?

Posée par: Miter saw

The description, and pictures show the rollers. Not sure about length stop.. That is easy enough to make with a clamp and piece of wood.

Répondue par: Steve from Edmonton

Date de publication: 2019-04-28

Is it ok to leave a miter saw "permanently" attached to this and store it in the upright position for a long time? Trying to save floor space....

Posée par: tpic

you certainly can - and save storage space.

Répondue par: Doaft

Date de publication: 2017-09-27

Same question as 'tpic'. Can I leave the mitre saw attached for indefinite period of time?

Posée par: Denise01072019

Will it fit a sliding miter saw with 17" X 17" base holes?

Posée par: BJR56

What is that little thing on the leg (6th picture)?

Posée par: Tosea

Will the DeWalt table saw attach to this stand, looking for rolling stand.

Posée par: Jpwc

Support roulant pour scie à onglets de DeWalt, ajustable, noir et jaune, en acier est évalué 3.2 de 5 de 133.

Rated 4 de 5 de QuakerJohn par Great functionality, minor issue w/release cable Wish I'd bought this stand years ago and saved my body hauling my unwieldy chop saw around. Now just roll my saw out of the barn for work around the land. Sturdy, easy to roll, strong extension arms. Able to store the saw rotated to the 60 degree mark, upright on the stand with good stability and an efficient use of floor space. Did have problems getting the release mechanism to work a few months in. Looked up the issue online and learned I needed to tighten the cable housing tensioning nuts. Easy to do and no problems since over the past year. Overall, I am quite satisfied with the quality and functionality of this stand.

Date de publication: 2021-12-19

Rated 5 de 5 de Jack-of-all-Trades par Releasing the locking mechanism. [This review was collected as part of a promotion.] As noted in other reviews and based on personal experience with stand you "must" lift up on the handle next to the release mechanism to lower the saw (heavier the saw the more you need to lift, same to lock it up right). The stand will now lower but assist the lowering of the stand. Heavy saws will drop rather quickly & by all means keep fingers out of pinch points. Lubricate the rotating joints occasionally with silicone lubricant but not the stand's cylinder. Use a rag sprayed with silicone to "clean" off the cylinder but try not to get the cylinder seal soaked in lubricant. Had mine for years. Nice not to have to remove saw plus it stands upright in corner of garage out of the way till needed.

Date de publication: 2019-07-26

Rated 2 de 5 de Ricky P par Alright but expecting better This stand wasn’t too hard to assemble and use but the adjustable arms are a heck of a time to use I literally have to use a hammer to get them out and then they flex when you’re using heavier materials (which is expected) but I just had to sand down the one arm that goes into the other and grease it up and it still doesn’t work perfectly but I can use it with my hands, and when I was sliding the arms in and out a big metal shaving came out of the one arm... I would’ve expected dewalt to come up with a better design, if you can handle carrying the stationary stands I would get one of those I love that stand but the rolling stand no thanks.. also I had to mess with the mechanism that lowers it up and down after 6 months of owning this

Date de publication: 2019-11-22

Rated 3 de 5 de TMcD par Hs some issues I bought this thinking that moving my miter saw would be much easier. I was right, to a point. Like others have said, there's a problem with folding and unfolding. This is an issue I don't have the back strength to screw with it every time I want to move it. Plus that handle that's screwed up. Dewalt people haven't worked with this or it would have been made better. I'd pay another $20-$30 for something that's worth it. Dewalt needs to start thinking about the customer a little more and not about how they can make a cheap product and charge more for it.

Date de publication: 2018-05-10

Rated 4 de 5 de DMA19 par Mitre saw stand problem fixed I like this stand. Its constructed very well, but I to had problems with it collapsing. (See photos below) So the first thing I did was to loosen the screw in the middle. Didn't work. Then I loosened the nuts on both sides of the screw. Didn't work but I left both the screw and the nuts loosened. Next, I readjusted the cable adjuster that holds the tension cable as shown below. This was a little difficult to do because of the spring, but I got it adjusted. It seems to me that the cable is kind of long and needs have more tension. I also added a cable tie to the rail above past the cross bar above this mechanism to help put more tension on the cable. Even though I did all this while in fully extended position, I was still very cautious about it collapsing but it did not. After I did all this I grabbed the handle, pull up, pushed the release lever, and pushed down slowly and it collapsed. In summary: loosen the screw and two nuts, and readjust cable adjuster. Hope this helps.

Date de publication: 2019-01-28

Rated 1 de 5 de Irritated par Stand won’t fold, brand new I just bought this stand and the first time I used it I won’t fold up, there are complaints everywhere about this but no answers on how to resolve the issue this seems to be a ligitimate flaw that is going unchecked.

Date de publication: 2018-07-15

Rated 5 de 5 de swamptodd par Great Stand I bought this stand after looking at other stands and reviews of other stands. This stand is not only well built but super strong. I mounted my double bevel compound slide saw on and it has become the best thing I’ve bought in some time. It’s easy to use and helps make the task of moving my saw around so much easier. The saw is secure and positions perfectly at the right height. Everything about the stand is well built and ergonomically it’s set up to make using it a one person experience. I’m a 55 year old craftsman and anytime tool that makes getting setup on the job site faster and easier is a win/win for both me and the customers.

Date de publication: 2020-04-12

Rated 4 de 5 de LeBeaux Restoration par Closing issue resolved After putting it all together It was stuck in the up position. after inspection and tinkering a bit, I pulled off the plastic guard covering the collapse mechanism. I found that the 2 small nuts on either side were a bit to tight preventing the sliding motion. after slightly loosening each one the stand works great. I know many people leave the saw mounted however i would like to see a feature to quickly mount the saw and remove it again without the super long threaded bolts holding it in. However it does make for a sturdy build. I expect this will last longer than the smaller more portable stands.

Date de publication: 2020-08-14

Support roulant pour scie à onglets de DeWalt, ajustable, noir et jaune, en acier Avis - page 2

Support roulant pour scie à onglets de DeWalt, ajustable, noir et jaune, en acier

Caractéristiques

Spécifications techniques

Produits fréquemment achetés ensemble

Vous pourriez aussi aimer

Does the stand come with rollers and length stop?

Is it ok to leave a miter saw &quot;permanently&quot; attached to this and store it in the upright position for a long time? Trying to save floor space....

Same question as 'tpic'. Can I leave the mitre saw attached for indefinite period of time?

Will it fit a sliding miter saw with 17&quot; X 17&quot; base holes?

What is that little thing on the leg (6th picture)?

Will the DeWalt table saw attach to this stand, looking for rolling stand.

Changement de magasin

Is it ok to leave a miter saw "permanently" attached to this and store it in the upright position for a long time? Trying to save floor space....

Will it fit a sliding miter saw with 17" X 17" base holes?