Trousse d'installation pour verrou de porte, bi-métal, 6/pqt

N° d'article 00276832 N° de modèle CMAH1MDL
Trousse d'installation pour verrou de porte, bi-métal, 6/pqt
 

Caractéristiques

La trousse de verrouillage de porte Craftsman(MD) est spécialement conçue pour faciliter et accélérer le processus d'installation d'un ensemble de verrous sur une nouvelle porte en bois ou en métal. Réglable pour les longueurs de 2 3/8" et 2 3/4", le gabarit auto-centrant s'adapte à toutes les largeurs de portes courantes. L'ensemble comprend des scies emporte-pièces de 1" et de 2 1/8" de conception bimétallique pour une durabilité exceptionnelle.

Spécifications techniques

Type :Ensemble d'installation Inclus :Scie emporte-pièce de 1" de diamètre, scie emporte-pièce de 2 1/8" de diamètre, gabarit de porte, modèle pour plaque de verrouillage, mèche, arbre avec guide Emballage :6 pièces Couleur :Rouge et noir Utilisations :Portes de largeur régulière en métal et en bois, réglable pour les longueurs 2 3/8" et 2 3/4" Composante :Construction bimétallique Modèle :Verrou de porte

Vous pourriez aussi aimer

SPYDER
Ensemble de forets à bois Spyder stinger(MC) à 6 pièces, oxyde noir
Format 6MX
N° d'article 16415001
N° de modèle 11002CA
★★★★★ ★★★★★
0
(0)
LENOX
Scie emporte-pièce à grains de diamant, 1/4 po
Format 1/4"
N° d'article 79915272
N° de modèle 121074DGDS
★★★★★ ★★★★★
4,6
(57)
CRAFTSMAN
Trousse d'installation pour verrou de porte, acier au carbone
N° d'article 00276956
N° de modèle CMAH1WDL
★★★★★ ★★★★★
3,5
(24)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée Exchange-A-Blade, 1/4", échangeable
Format 1/4"
N° d'article 34595593
N° de modèle 3056002
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Ensemble de scies emporte-pièces, bi-métal, 7/pqt
Format 7MX
N° d'article 00276597
N° de modèle CMAH1SET7
★★★★★ ★★★★★
3,8
(52)
BOSCH
Grand mandrin standard à deux broches, 3/8 po
Format 1 1/4x6"
N° d'article 19835696
N° de modèle HSBAMP
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Scie emporte-pièce bimétallique, sans arbre, 4", noir
Format 4"
N° d'article 00276897
N° de modèle CMAH14U
★★★★★ ★★★★★
4,5
(8)
LENOX
Scie emporte-pièce à grains de diamant, 3/16 po
Format 3/16"
N° d'article 79915271
N° de modèle 121063DGDS
★★★★★ ★★★★★
4,3
(28)
EXCHANGE-A-BLADE
Scie emporte-pièce EAB Tool bimétal (M3) Industriel, échangeable, 4 1/4"
Format 4 1/4"
N° d'article 3459090
N° de modèle 1054862
★★★★★ ★★★★★
5
(1)
BOSCH
Mandrin moyen standard pour scie emporte-pièce, 3/8 po
Format 9/16"
N° d'article 19835695
N° de modèle HSBAM
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 1", échangeable
Format 1"
N° d'article 34595597
N° de modèle 3056042
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 1 1/4", échangeable
Format 1 1/4"
N° d'article 34595598
N° de modèle 3056052
★★★★★ ★★★★★
5
(1)
DEWALT
Scie emporte-pièce bimétal, 4 1/4 po
Format 4 1/4"
N° d'article 0794371
N° de modèle D180068
★★★★★ ★★★★★
0
(0)
LENOX
Scie emporte-pièce en acier, Speed Slot, 4 1/8''
Format 4 1/8"
N° d'article 79915372
N° de modèle 2060593
★★★★★ ★★★★★
4,8
(8)
DEWALT
Gabarit de perçage pour porte DeWalt(MC), acier M3
N° d'article 0027250
N° de modèle D180004
★★★★★ ★★★★★
4,2
(104)
LENOX
MANDRIN POUR SCIE EMPORTE-PIÈCE
Format 1 1/4-6"
N° d'article 79915269
N° de modèle 1779772
★★★★★ ★★★★★
4,7
(30)
SPYDER
Ensemble emporte-pièce Spyder 14 pièces
Format 14MX
N° d'article 16415000
N° de modèle 600880CA
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Scie emporte-pièce pour luminaire encastré, bi-métal, 4"
Format 4"
N° d'article 00276918
N° de modèle CMAH34RL
★★★★★ ★★★★★
2,4
(5)
CRAFTSMAN
Scie emporte-pièce avec mandrin, bi-métal, 2 1/2"
Format 2 1/2"
N° d'article 00276917
N° de modèle CMAH1212A
★★★★★ ★★★★★
4,4
(14)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 1 1/2", échangeable
Format 1 1/2"
N° d'article 34595600
N° de modèle 3056072
★★★★★ ★★★★★
0
(0)
BOSCH
Scie emporte-pièce 4 1/8 po
Format 4 1/8"
N° d'article 19835326
N° de modèle HB412
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Mandrin hexagonal à changement rapide, échangeable, 3/8"
Format 3/8"
N° d'article 34595990
N° de modèle 1054462
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Arbre de scie emporte-pièce, 3/8", acier carbone
Format 3/8"
N° d'article 00276995
N° de modèle 2063303
★★★★★ ★★★★★
4,2
(16)
LENOX
MANDRIN DE SCIE EMPORTE-PIÈCE
Format 1 1/4-6"
N° d'article 79915268
N° de modèle 1779670
★★★★★ ★★★★★
4,4
(31)
EXCHANGE-A-BLADE
Scie emporte-pièce diamantée EAB Tool, 1 3/8", échangeable
Format 1 3/8"
N° d'article 34595599
N° de modèle 3056062
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Trousse d'installation pour verrou de porte, bi-métal, 6/pqt est évalué 2.8 de 5 de 92.
Rated 1 de 5 de par Worthlessness [This review was collected as part of a promotion.] I've been doing construction all my life and am very knowledgeable and experienced. It's Flimsy, cheaply made, plastic bends easily causing alignment to happen, if you use this might need to replace door. We tried on a piece of old door prior to using due to the reviews and it definitely misaligned and we were not able to make it work. So think twice and look for a solid metal door hole saw or a truely solid plastic that does not bend under pressure.
Date de publication: 2019-07-27
Rated 1 de 5 de par Chinese plastic junk [This review was collected as part of a promotion.] I hadn't even been drilling the first hole for 30 seconds before the drill-blade suddenly jerked and broke one of the spacing tabs. I thought I would still be able to use the jig as a template if I exercised extra caution but when I drilled through the other side, the hole was misaligned. A second attempt was made higher up but, AGAIN, misaligned. I even measured twice before drilling but the Chinese plastic was determined to fail. Trying to decide whether to drill 3rd hole free-style or buy new door.
Date de publication: 2019-06-08
Rated 1 de 5 de par Disposable Jig I’m a contractor and experienced carpenter. If you want a one-time-use tool, buy this! Can you use it more than one time? Sure. But you have to be extremely careful not to break it. The plastic is cheap and broke on my second door. And because its so flimsy, you have to be careful to make sure everything is actually lined up properly. Isn’t that what a jig is for? So that you can whip it out, drill, and be off? If you’re a homeowner and need it for 1 door, it’s probably a decent buy, otherwise, I would spend the extra money to upgrade.
Date de publication: 2020-01-03
Rated 1 de 5 de par HOLE SAW/DOOR KNOB KIT [This review was collected as part of a promotion.] Surprisingly flimsy and cheap for a craftsman product. The only reason i gave it a star is that the guide makes it easy to mark your holes evenly. But even that part was very soft and flexible. Arbor bit snapped 1st time using, drilling through a hollow core door, thats a cheap bit for sure. Dont buy it, not worth the price
Date de publication: 2019-02-12
Rated 3 de 5 de par Holesaw would not drill through the metal door!!! Everything was going fine until i started to drill the first hole. the hole saw was against the door just smoking and trying to burn thru the door rather than cutting thru. the bit had gotten so hot it was melting the jig. so i had to drill some small pilot holes all the way around where the bit was supposed to be cutting just to give the bit something to grab hold of and even then i had to apply so much pressure it was still just burning thru. very good idea very bad hole saw !!!
Date de publication: 2019-03-18
Rated 1 de 5 de par Good idea but absolutely abysmal implementation Flimsy plastic parts. One of the two plastic tabs that fix the set-back (2 3/8 or 2 3/4 inch) snapped off the first time I placed the jig on the door. All of the holes were then in the wrong positions - even the hole for the bolt was not centered properly on the door edge. I jammed the tab into its the correct position, but the hole positions were still off. I ended up positioning the holes the old-fashioned way, with ruler and T-square. The guides that position the face bore holes did not press flat against my door (which was of standard width). Forcing them flat moved the hole center 1/4 inch. The router guide is simply a joke. The hole saws are the only part that work correctly. However, if drilling into a metal-sheathed wood door, as in my case, the 2 1/8 inch hole saw ends up jammed so firmly onto the arbor that it is virtually impossible to remove. It's hard to believe that the once-renowned Craftsman quality has sunk so low.
Date de publication: 2019-08-09
Rated 1 de 5 de par Poor quality [This review was collected as part of a promotion.] I love craftsman tools. This one however is horrible. Very poor quality. Does not secure to the door in any way. Ive been doing home remodel and repair work a long time and I would never use this product again. The quality of the bits was fantastic though.
Date de publication: 2019-08-05
Rated 1 de 5 de par Not for Metal Doors with Preexisting Holes! [This review was collected as part of a promotion.] I need to expand a 1 5/8 non-standard deadbolt hole to 2 1/8. I secured this jig with screws and went to work. The hole saw barely cut into the metal and only jumped around on the exterior of the door, until it jumped so high that the jig got in the way and was chewed by the saw.
Date de publication: 2019-07-06
  • y_2021, m_4, d_18, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_92
  • loc_fr_CA, sid_00276832, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin