Vis et bague d'extrémité Euramax, brunes et galvanisées, en métal, paquet de 10

N° d'article 76745069 N° de modèle 3304719PK Format7"
Vis et bague d'extrémité Euramax, brunes et galvanisées, en métal, paquet de 10
 

Caractéristiques

Maintenez vos gouttières en place avec ces vis pour gouttière de marque Euramax. Ces vis en aluminium de type K permettront de fixer une gouttière à la bordure de votre toiture. Elles sont vendues en paquet de 10 et mesurent chacune 7 pouces de long.

Spécifications techniques

Emballage :10 par paquet Type :Vis de gouttière Utilisations :Pour gouttière K Fini :Galvanisé Longueur :7 po Couleur :Brun Composante :Aluminium

Vous pourriez aussi aimer

EURAMAX
Rallonge de descente pour gouttières Euramax Flex-A-Spout, blanche, en vinyle, 24 po L. x 4 19/32 po l.
Format 2x3-3x4"
N° d'article 7642001
N° de modèle 85010
★★★★★ ★★★★★
5
(1)
AMERIMAX
Rallonge de descente pour gouttière Amerimax Flex-A-Spout, brune, en vinyle, 25 1/2 po L. x 4 po l.
Format 2x3-3x4"
N° d'article 7642002
N° de modèle 85019
★★★★★ ★★★★★
4,7
(6)
EURAMAX
Rallonge de descente de gouttière Flex-A-Spout Euramax, vinyle, brun, ajustble de 22 po à 55 po L.
Format 2x3-3x4"
N° d'article 01285035
N° de modèle 85014
★★★★★ ★★★★★
3,3
(4)
AMERIMAX
Rallonge de descente pour gouttière Amerimax Flex-A-Spout, verte, en vinyle, 55 po L.
Format 2x3-3x4"
N° d'article 7642003
N° de modèle 85011
★★★★★ ★★★★★
1
(1)
ALU-REX ELEMENTS
Protège gouttière «Max Robustesse»
Format 24'
N° d'article 13045004
N° de modèle E10050
★★★★★ ★★★★★
0
(0)
TUFFKITS
Déviateur pour tuyau de descente de gouttière Tuffkits, blanc, vinyle, vendu à l'unité
N° d'article 0128001
N° de modèle KM9030-9
★★★★★ ★★★★★
0
(0)
PLASTMO
Tuyau de descente pour gouttière carré K-Snap de Plastmo, blanc, en vinyle, 120 po L. x 2 1/2 po l.
Format 2 1/2"x10'
N° d'article 5539012
N° de modèle K15021
★★★★★ ★★★★★
0
(0)
FLEX-A-SPOUT
Rallonge de descente pour gouttière Flex-A-spout, noire, en vinyle, de 55 po L.
N° d'article 01285096
N° de modèle 85015
★★★★★ ★★★★★
3,1
(9)
PRIMEAU
Tuyau de descente cannelé Primeau Ho-Do, blanc, acier Galvalume, 120 po L.
Format 10'
N° d'article 55655010
N° de modèle 01390
★★★★★ ★★★★★
0
(0)
AMERIMAX
Plaque d'écoulement Amerimax en plastique de 24 po x 11,5 po x 2 po, noire
Format 24x11.5x2"
N° d'article 01285102
N° de modèle 3015-12
★★★★★ ★★★★★
0
(0)
AMERIMAX
Plaque d'écoulement Amerimax en plastique de 24 po x 11,5 po x 2 po, ardoise
Format 24x11.5x2"
N° d'article 01285103
N° de modèle 3014-12
★★★★★ ★★★★★
0
(0)
HO-DO
Tuyau de descente de gouttière Primeau Ho-Do, blanc, en acier, 60 po L x 3 po l.
Format 2"X3"X5'
N° d'article 55655034
N° de modèle 033AB0090
★★★★★ ★★★★★
0
(0)
VANTAGE
Parefeuilles pour gouttière Quest, noir, polystyrène, 240 pi L. x 6 po l.
Format 6"X20'
N° d'article 1401090
N° de modèle VGG620
★★★★★ ★★★★★
0
(0)
Crapaudine de gouttière extensible Amerimax, fini argent, aluminium, 1 unité, 5 1/2 po L. x 2 3/4 po l. x 3 po diamètre
N° d'article 76745032
N° de modèle 21059
★★★★★ ★★★★★
3,2
(22)
AMERIMAX
Plaque d'écoulement Amerimax en plastique de 24 po x 11,5 po x 2 po, pierre
Format 24x11.5x2"
N° d'article 01285101
N° de modèle 3013-12
★★★★★ ★★★★★
0
(0)
PRIMEAU
Bagues d'extrémité et clous Primeau Ho-Do, blancs, résistants aux intempéries, paquet de 10
N° d'article 55655020
N° de modèle 02390
★★★★★ ★★★★★
0
(0)
PRIMEAU
Gouttière Ho-Do de Primeau, acier Galvalume, blanc, 120 po L.
Format 10'
N° d'article 55655000
N° de modèle 00190
★★★★★ ★★★★★
5
(1)
ALU-REX ELEMENTS
Protège gouttière «Max Filtrage»
Format 24'
N° d'article 13045002
N° de modèle E10010
★★★★★ ★★★★★
0
(0)
AMERIMAX
Plaque d'écoulement Amerimax en plastique de 24 po x 11,5 po x 2 po, verte
Format 24x11.5x2"
N° d'article 01285100
N° de modèle 3012-12
★★★★★ ★★★★★
0
(0)
AMERIMAX
Plaque d'écoulement Amerimax en plastique de 24 po x 11,5 po x 2 po, brune
Format 24x11.5x2"
N° d'article 01285104
N° de modèle 3011-12
★★★★★ ★★★★★
0
(0)
PRIMEAU
Dauphin de rallonge de gouttière Primeau Ho-Do, blanc, en acier, 1 unité
N° d'article 55655015
N° de modèle 01890
★★★★★ ★★★★★
0
(0)
PRIMEAU
Tuyau de rallonge de gouttière cannelé Primeau Ho-Do, blanc, en acier, 1 unité, 18 po L.
Format 18"
N° d'article 55655014
N° de modèle 01790
★★★★★ ★★★★★
0
(0)
PLASTMO
Support pour gouttière demi-ronde Plastmo, blanc, en vinyle, 1 unité, 4 po l.
N° d'article 55395626
N° de modèle P06401A
★★★★★ ★★★★★
5
(1)
PLASTMO
Porte-tuyau classique Plastmo, blanc, en vinyle, rond, 1 unité
Format 3"
N° d'article 55395630
N° de modèle P14031A
★★★★★ ★★★★★
0
(0)
QUEST
Parefeuilles pour gouttière Quest, noir, polystyrène, 300 pi L. x 6 po l.
Format 6"x25'
N° d'article 1401016
N° de modèle VGG625
★★★★★ ★★★★★
0
(0)

Do they come in black 

Posée par: Rover54
  • y_2021, m_11, d_26, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_fr_CA, sid_76745069, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Vis et bague d'extrémité Euramax, brunes et galvanisées, en métal, paquet de 10 est évalué 4.6 de 5 de 83.
Rated 4 de 5 de par Good stuff, but..... These hold the gutters excellent and you have no chance of dinging up a gutter like you might while hammering in a nail. On the downside, prepare to buy an extra box of these because unless you drill pilot holes for each one you will strip some heads as you put them in. The square heads on the screws strip easily unless you are very careful and put your weight behind the driver. There is a bit provided to drive them with but it is very cheap and wears easily. I used one of my own bits and it made some difference, though I still stripped a few out. If these had a different head design I would say that these are perfect for this job.
Date de publication: 2013-11-22
Rated 5 de 5 de par It's the driver bit, not the screws... These screws worked perfect. I even drove some of them in while I was on the roof with an outstretched arm over the side where I was not able to exert much pressure inline. The people saying they had problems with the screw heads stripping out most likely used the driver bit that comes with the screws. That bit flops around all over the place in the screw head. I used my DeWalt impact driver with a DeWalt impact driver bit and had absolutely no issues. Just make sure whichever bit you use fits snug in the head of the screw and you will be good to go.
Date de publication: 2016-08-13
Rated 5 de 5 de par Neither the screw or the bit are defective These worked like a charm. The gutter nails were loose enough to pull out by hand, I put the sleeve in, pushed the screw through to where the nail hole was. Using a cordless drill with variable speed, screwing these in was a breeze. Just don't go full power as I suspect some people did and stripped the screw head. I used the supplied bit with no issues or stripped screws. You have to remember that there is paint in the screw head, so a little extra push on the screw gun makes a big difference.
Date de publication: 2016-09-13
Rated 5 de 5 de par No problems installing These gutter screws appeared to be of high quality. They installed easily and snugly into the old spike holes. The supplied Robertson R-3 bit (1/8” square bit) appeared to be of high quality, did not slip out of the screw heads, and showed no sign of wear after installing twelve screws. I set the clutch of my cordless drill just high enough to seat the screws and had no stripping problems. It might be difficult to install these screws in new work without pilot holes since the minor diameter of the screw threads is relatively large.
Date de publication: 2016-12-31
Rated 4 de 5 de par Best idea since sliced bread. Why didn`t somebody come up with these before I put new gutters on my storage building.. Ten times better than the micky mouse things I used that only lasted one winter before the gutters started sagging.. Now I think you can hang on the gutters and they won`t sag. Going to replace the old spike and ferrel on my house before winter.Tired of driving them back in every fall. I had no problem at all installing these in new places. Just be sure you have a powerful driver to do it. My 14.4 volt just barely would do it.
Date de publication: 2014-05-09
Rated 5 de 5 de par "Screwed up" can be a good thing. We use these in instances where ice or mild decay has caused a gutter spike to be forced or slip out of a fascia board. Simply knocking the spike back in does not provide a reliable grip since the friction provided by the wood is compromised by either rot or its being damaged by the spikes initial insertion having failed. These screws work easily and reliably for us since they bite into the wood with a mechanical advantage in excess of a spike's reliance on friction and fiber compression. We have not experienced a problem with driver bits cam out of the Robertson drive holes, but then we do use impact drivers (not screw guns) to drive them and all other screws we use. Our use of this product is limited to a repair and maintenance scenario. We do not install gutters.
Date de publication: 2016-12-27
Rated 4 de 5 de par Excellent Product - No sagging gutters I purchased these gutter screws to replace gutter nails that had come out of the fascia (I assume due to the weight of the water in the gutter over the years), This product easily fit into the existing (nail) holes in the gutter and bit into the fascia wood well, with a strong hold. Frankly, after using this product, I can't see why anyone would use nails to install gutters (other than the cost is lower). For about 20 cents each every 2 feet or so at the time of installation, one would have worry-free gutters that would not seperate from the fascia board or sag over the years. My only complaint is that because the head design is the square one used for deck board screws, a square head bit was not included in the package and there was no "warning" that a square bit head would be required for installation. Also, FYI, realistically, one needs a screw gun (not a screwdriver) to sink these fasteners to get the proper tightness.
Date de publication: 2011-06-29
Rated 5 de 5 de par Great product! They work great. Replaced 30 old spikes. Only two wouldn't tighten up and made new holes in wood to tighten. The bit that comes with them is great. Doesn't strip easily at all. Neither did the screws. Some paint can come off the head but it's a gutter screw. So what. Definitely recommend for old gutters that are falling off or loose.
Date de publication: 2017-08-27
  • y_2021, m_11, d_26, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_82
  • loc_fr_CA, sid_76745069, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changement de magasin

Vous êtes sur le point de changer de magasin.

Veuillez noter que si vous changer de magasin, les prix affichés sur le site Web peuvent changer et votre panier d'achats pourrait alors se vider.

Conserver mon magasin Changer de magasin